Question about JVC LT-32A200 LCD TV

Open Question

My JVC LT-32A200 will not turn on. The blue power light will blink a number of times and then it goes out and the red standby light comes on. I have tried to reset it by unplugging the set and waiting one minute before tuning it on, but no luck.

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 257 Answers

SOURCE: I have a JVC LT-42X579 TV. I got home tonight and

This is common problem of the failure of power supply board inside TV. You need technician to figure out this problem.

Posted on Aug 13, 2009

Ad
josetejas
  • 300 Answers

SOURCE: JVC LT-42E488. No picture. JVC logo comes up for a few seconds.

A firmware update might fix it. Call an authorized servicer, explain the symptom.

Posted on Jan 29, 2010

  • 1 Answer

SOURCE: My JVC LT-47X579 is not "turning on" since we

hmm i had the same problem the saturday before on my lt-42x579but i didnt have anything hooked up to it blue light came on then flashed ..no pic this happend one week after it was pd off from a rental store we should investigate

Posted on Jan 03, 2011

  • 1 Answer

SOURCE: JVC LT-42X579 blinking blue light

wow thanks you thanks you God bless you who figured it out worked fabulously thanks again

Posted on Jun 19, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a JVC to withe a red and blue flashing light on the front and it won't turn on.


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.

Sep 02, 2017 | JVC Televison & Video

1 Answer

I have a jvc lt-42Em59. When the power is turned on the blue light comes on and after a few secs it flashes. Tried changing operating mode by doing the sequence with the buttons. Tried several times and...


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.
If blinks continue without any pause, the main board is faulty.

Jan 22, 2015 | JVC Televison & Video

1 Answer

My lg tv has power and blue light comes when powered up the goes to red blinking light never a picture or audio


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "Mosaic" or "Magazine" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.

Apr 28, 2014 | LG 32LK330 TV

1 Answer

Lt-427tg30j jvc 42 inch blue blinking light


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "Mosaic" or "Magazine" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.

Apr 22, 2014 | Sony KV-32S40 32" TV

1 Answer

Jvc lt 42tg30j


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power led, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating, to many popular brand TVs and other devices. Viewing it in "Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience.

Mar 26, 2014 | JVC LT-42X579 42 in. LCD TV

1 Answer

Hi, Ive got a JVC LT-39N510. Sometimes it goes off and I have to unplug it for a couple of hours and then it will work for a while. I unplugged it last night and when I powered it on today, only the red...


How many times this standby/power light blinks at one time switch ON? Count it carefully. These blinks are fault indication, and known as blinking codes. From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV. This will make repair easy.
If you're sound in electronics, and wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name/model number/IC used, in the search box at the top right of the display window.

Oct 29, 2013 | JVC LT Televison & Video

1 Answer

Jvc 61" hdtv shuts itself off


I am amazed how many people post questions with no model number, about a hundred different sixty one inch JVC sets exist, for a answer or help please provide the full model number.

Dec 15, 2012 | JVC Televison & Video

1 Answer

My 52 in jvc model lt-52x579 turns on but there is no picture or sound and about two seconds later the led light for the power starts to blink i tried to turn it off but it just keeps on trying to turn on...


Sound like the power supply board has gone out .Unplug the tv for 2 or 3 minutes and plug it in again and try to turn on. Some times they will come on .But It sounds like the PSB is going out .

Feb 14, 2011 | JVC LT-52X579 52 in. LCD TV

1 Answer

The blue and red light is blinking on my jvc dlp television and it will not come on. What could the problem be?


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
Blinking codes details of many popular brand TVs are given. Surf the site with patience.

May 21, 2010 | JVC HD-52G886 52" Rear Projection HDTV

4 Answers

JVC LT-32P679 Blinking Power Light, Automatic Shutoff


1. Hold [menu] and [vol-] button on the side of the TV
2. while holding these, press the [power] button on the side of TV (NOT remote)
3. blue light comes ON and stays ON
4. wait 10 seconds then let go of [menu] and [vol-]
5. wait another 30 seconds and some type of picture should appear

I think this is right. I got it from the JVC call centers guys so sorry if I missed or messed up a step.

Mar 17, 2009 | JVC LT-32P679 32 in. LCD TV

Not finding what you are looking for?
JVC LT-32A200 LCD TV Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74482 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...