Question about ASUS P5N-E SLI Motherboard

2 Answers

Rj45 I have network/internet cable in the rj45 port but don't see anything in the network connections window for the rj45 port. It's as though it doesn't exist on the motherboard.

Posted by on

  • billynastys Oct 07, 2008

    The Ethernet connection is enabled in BIOS, and windows detect the LAN
    but i can't connect on the internet. TCP/IP configuration is OK, but 0
    sent and received packages. When I try to reinstall Ethernet driver
    from Asus P5N-E SLI the installation program get blocked.

    Sorry for my english.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Please check the nic driver is properly installed

Posted on Jun 07, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I overlooked the installation cd for the drivers. Everything was fine after they were installed from the cd. Thanks for your quick response.

Posted on Apr 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DFI lanparty UT RDX200 RJ45 Lan Port does not recognize ethernet wire


you will have to open up your network connections

click start control panel network connections this may vary depending on your operating system look for local area connection if you see a red X or a yellow exclamation or question mark ! ?
you will need to update or install the driver or it could be firewalled

click start control panel administration tools computer management device manager scroll to network adapters should see a yellow question mark? right click install drivers
the driver might be on the disc supplied by your ISP internet service provider
or the motherboard disc or you might download one if you dont have on a disk

Make sure you Ethernet is enabled in bios restart your computer during the boot up process you will see on your screen a certain key to press to enter set up (BIOS) press and hold that key to enter bios using arrow keys scroll to intergrated peripherals look for SiS On Chip Pci Device press enter scroll to SiS 10/100m press enter make sure its enabled

hope this helps

Jun 30, 2012 | DFI LANParty UT RDX200 CF-DR Motherboard

1 Answer

I want to network two pc with windows xp using crossover cable,, how do i do it step by step pls.


Connect two computers using a crossover cable
If you need to connect two computers but you don't have access to a network and can't set up an ad hoc network, you can use an Ethernet crossover cable to create a direct cable connection.
Generally speaking, a crossover cable is constructed by reversing ("crossing over") the order of the wires inside so that it can connect two computers directly. A crossover cable looks almost exactly like a regular Ethernet cable (a "straight-through" cable), so make sure you have a crossover cable before following these steps.
Before buying a crossover cable, check your network adapter. Some newer network adapters automatically "cross over" when they detect that they are connected directly to another network adapter using a regular Ethernet cable.
To connect two computers with a crossover cable
This works best if both computers are running this version of Windows.
Plug each end of the crossover cable into a network port on the back of each computer.
On one of the computers that is running this version of Windows, do the following:
Open Network and Sharing Center by clicking the Start button , clicking Control Panel, clicking Network and Internet, and then clicking Network and Sharing Center.
In the network map at the top of Network and Sharing Center, double-click the Unidentified network? icon. (If you have more than one network, this icon will be labeled Multiple networks.)
If network discovery and file sharing are turned off, in Network, click the Information bar containing the following message: "Network discovery and file sharing are turned off. Network computers and devices are not visible. Click to change...," and then click Turn on network discovery and file sharing. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
In the Network discovery and file sharing dialog box, select one of the following options:
No, make the network that I am connected to a private network
Yes, turn on network discovery and file sharing for all public networks
The first option is usually the best choice because it only affects the network that you are connected to.
Notes
Networks created with crossover cables are automatically set up as "Public place" networks, which means that network discovery, file sharing, and printer sharing are off by default.
For Gigabit Ethernet or token ring networks, you will need a slightly different kind of crossover cable. For more information, contact a cable manufacturer.
Icons for both computers should now be visible in the Network window. Double-click each computer icon to share printers and other resources.
Note
If one of the computers is running Windows XP, it can take some time for that computer to appear in the Network window. You might need to move both computers to the same workgroup. You can do that by changing the workgroup on either computer. To change a workgroup, see Join or create a workgroup. You might also need to turn on file and printer sharing on the computer running Windows XP.
Hope this help!

Sep 06, 2011 | Pine Technology Motherboard Xfx Nforce...

2 Answers

NO DRIVER asus cuv4x free request


You can download the device drivers from ASUS WEB site.Select your model motherboard/computer/laptop, and make sure you select driversthat matches your Windows operating system. Please click on this link to theirWEB support site : - http://support.asus.com/download/download.aspx?SLanguage=en-us

May 28, 2011 | VIA ASUS CUV4X Socket 370 Apollo Pro 133Z...

2 Answers

Modem conneced poperly, LAN is working & modems admin page can be open, but cannot be connected to the internet


Hello, If you want to connect through cable use cross connectionwith RJ45 For your main pc LAN setting >R click on my network >properties>R-clickon LAN modem>properties />select internet protocol>properties>useset for manually IP>
IP address=10.0.0.1
subnet =225.0.0.0

for ping =run>10.0.0.2 -t
Another one will be same process>
IP address=10.0.0.2
subnet =225.0.0.0

default gate way=10.0.0.1
now ping >run type ping10.0.0.1 -t
R click any folder now ,properties>sharing>just share>tic on share thefolder on my network>can change any name for folder,
Hope it will help you.

Jan 26, 2011 | Motherboards

2 Answers

New, second modem won't recognize modem


You probably need to install network adapter driver on your new hard drive.
Go to my computer properties, select "Device Manager" and see if there is a network adapter installed and working.

Dec 27, 2009 | Dell (S423) for Dimension 8100 (3F546)...

2 Answers

How can i connect a toshiba runniung windows me. to the internet via ethernet cable? is it possible with just the cable and no card? is there a programe i can download to help my laptop? what can i do?


Hi,
It should have a LAN (network card) built in to the laptop.
First of all make sure you have the LAN (network drivers) installed. You can do this by checking in device manager.
To open device manager click Start, point to Settings, and then click Control Panel.
Double-click the System icon. Click the Device Manager tab and look in the list for network adapters/controllers.

If the driver is installed you should be able to directly connect the ethernet cable to your laptop.

I'm not quite sure where the ethernet port is on that particular laptop but it will be on the back or sides of the unit and it will be the only port the ethernet cable fits into.

From there you should be good to go, if you can't get a connection reset the modem by removing power from it for 2 minutes, connect the power again, wait another 2 minutes for the device to settle and try the internet connection again.


Regards.

Oct 01, 2009 | Toshiba Satellite 1715XCDS...

2 Answers

I have 3 PCs -> 1st have 1 Ethernet port. (this PC have a laser printer, dual core processor, BSNL board band) -> 2nd have 2 Ethernet port. (1 is Motherboard inbuilt & other is connected as NIC...


http://www.geekgirls.com/windowsxp_home_network.htm

or

http://windowshelp.microsoft.com/Windows/en-US/help/76174f4a-7522-425a-9424-324dd299265e1033.mspx

or

http://video.google.com/videoplay?docid=-4885804885278005452#

Sep 20, 2009 | ASUS P5VD2-MX SE Motherboard

1 Answer

Posted my problem earlier but might not have explained properly, formatted my laptop since then cannot connect to internet. My PC is wireless, internet fine on PC and my daughter's laptop, when trying to...


On your laptop, do you have both RJ45(connector type for CAT-5 / Ethernet) and wireless capabilities? Are you trying to connect just wireless or hardwired or both? Go to your Network properties on the other pcs and try to mimic the settings. If you have a secure encrypted wireless connection, you'll have to get the Pass Phrase or Password for your router. There are many things associated with what your problem "could" be, but I'd have to know precisely how your network is configured to run...DHCP or Static? Correct PORT settings? Firewall settings? Get as much info as you can give me, and I'll try to help!

Mar 08, 2009 | ASUS P5PE-VM Motherboard

1 Answer

Pano mgnetwork?


gud pm keanne...hmmm here's my suggestion:

1st u need to buy 8-Port Hub/Switch
NIC or LAN Card
7 pcs UTP Wire w/ RJ45 Jack on both end (depende sa haba)
Then connect smartbro to the CPU (Built-in LAN)
Connect 8-Port Hub/Switch to the CPU (LAN Card)
Install Hub/Switch Driver (If Needed)
Connect the 6 PC to the Hub/Switch
Setup your network using Network Wizard (Control Panel)

goodluck...

Jan 29, 2008 | Intel PENTIUM-4 865GV CHIP MOTHER BOARD...

1 Answer

Usb problem


You shouldn't need the USB driver 2.0 from mercury because windows installs this with SP2. Suggest you un-install what you installed from mercury & update your version of windows (completley), through "Windows Update". Once windows is all updated & you have finished with a reboot. Plug your pen drive in a opened usb port. Open windows explorer. Scroll down & you should see an icon (left side of explorer), thats named like, Removable Disk. Give windows time to see the device. After a few minutes if your pen device does not show up try another usb port. One you know does work. If after a couple of minutes go by & you still don't see the device listed in explorer I would say the device is defective. Your Mp4 uses a cable to connect to the usb. Try connecting to another PC's usb port. It is possible the cable is dirty or bad.

Jan 13, 2008 | Mercury P4VM800M7 Motherboard

Not finding what you are looking for?
ASUS P5N-E SLI Motherboard Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you an ASUS Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...