Question about Samsung DVD-VR357

1 Answer

Dvd-vr357 I am trying to record vhs to dvd. This instructions I've used are not consistent. Is there someone there that can help me now? Regina

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I do this all the time. Press Menu on your remote control. From there go to Copy then select VCR-->DVD. If you're recording from the beginning of a tape just press the Enter button. If you're recording from another place on the tape hit Play or FF to advance you to the spot you want to start recording. Stop the tape where you want to record from and hit Enter. FF to the place on the tape where you want your recording to stop. Stop the tape where you want the recording to end and hit Enter. Hit the Down Arrow on the remote control to highlight Copy All and hit Enter. Your machine will rewind to the start point and begin recording and it will stop when you get to the indicated end point. Note: If you have more than one episode/show on a VHS tape and you want separate titles for each, you have to go through this process for each title. If you have more than one start and end point for each copy command you'll just get different chapters not different titles. I hope that made sense!!! Hope this helps you out.
pjrsop

Posted on May 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is third time a charm. Again several years ago I


Here is the owner's manual for your DVD machine. This is a VHS recorder but not a DVD recorder. To record VHS tapes to DVDs, you will need a DVD recorder.
You will plug the yellow video out connector on the VHS to the yellow 'Video in' connector on the DVD Recorder. Do the same for the red and white audio connections, out on the VHS, IN on the DVD Recorder. Connect your TV to the DVD recorder so you can see the picture you are recording.

Mar 31, 2010 | DVD & Blu-Ray Players

3 Answers

Samsung VR357 will not record


Check if the record lock of the tape has not benn removed..

Mar 19, 2008 | Samsung DVD-VR357

1 Answer

Samsung DVD Recorder "copy protected" error


I had a similar problem... went to samsung.com and downloaded firmware update for unit and instructions.... updated firmware and unit is now able to copy my own tapes from vhs to dvd.

Be sure to read and following firmware update instructions carefully...

Feb 24, 2010 | Samsung DVD-VR357

1 Answer

I have a Samsung DVD-VR357. I get no color on vhs tapes. I only get black and white.Picture is good. DVD color is ok. When I copy VHS to DVD, the DVD copy is in black and white also. DVD copies from...


Are you trying to copy a comercial VHS tape to DVD?
If you are then macrovision copy protection system on either the tape or in the machine is the reason for the loss of colour.
There's not a lot you can do about it. If you want to copy commercial material you will need to transfer it to a computer and get a program to do it. But unless it's unavailable it is cheaper to buy the DVD version I have found and you will get better picture and sound too!
If it does it with a none comercial tape (ie something recorded of the TV). Then it could be a head fault or something else. In which case try cleaning all the heads guides etc first.

Jun 20, 2009 | Samsung DVD-VR357

3 Answers

Menu question


if the tapes are store bought movies (on vhs) you will need to buy a copy guard eliminater...you dvd recorder was made not to record copy protected materal

Dec 07, 2008 | Samsung DVD-VR357

2 Answers

I have a Samsung DVD -VR 357 combo unit and i can't record


I have the Samsung dvd-vr 357. I have had a couple problems with it but I called samsung and they walked me through fixing it each time. I don't know if you have tried this or not but that is my suggestion. The last problem I had was copying from vcr to dvd. I got audio but no video. Problem was it was on dvd when i started it, it should have been on vrc. It should be set on whichever one you are recording from. Hope this helps someone.

Nov 12, 2008 | Samsung DVD-VR357

1 Answer

Samsung dvd-vr357 vhs problem


did u finlize the disk and get it prepd look in manal shows u talks about it

Feb 05, 2008 | Samsung DVD-VR357

1 Answer

Please help


I have had that problem in the past and I just pushed the DVD or the VHS button at the top of the remote. Sometimes when it is in a different mode you can get the menu but can't scroll.

Jan 19, 2008 | Samsung DVD-VR357

1 Answer

DVD-VR357: Copy multiple vhs tapes to one DVD?


Try using DVD/RW disks with pausing the recording when you change VHS tapes.

Dec 22, 2007 | Samsung DVD-VR357

1 Answer

Backup my vhs tapes


First hook up the VR357 to the TV with any cable ..
Then put a VCR tape into the VHS player.. get the tape to where you want to start the recording and press stop.
Then put a blank DVD in (-r or -rw is the best)
Then press VCR on the remote
Then press TO DVD on remote
you will see the word COPY come up on the DVD player and the VHS tape will start to play.
When you are done just press stop twice. and you will get a message that says "updating information to disk"

Dec 15, 2007 | Samsung DVD-VR357

Not finding what you are looking for?
Samsung DVD-VR357 Logo

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

68250 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4756 Answers

Are you a Samsung DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...