Question about Sharp 13VT-K100 13 in. Combo

2 Answers

No remote specific to Sharp combo unit..how to turn off closed captionning

Bought an older sharp tv/vcr 13vt/k100...am able to use Universal Remote to work the channels but not the menu for the tv...how do I turn off the closed captionning? I KNOW HOW TO READ AND I CAN HEAR!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We used a One4All model URC3021BOO remote. We programmed BOTH the TV function and theDVD/vcr button with code 0807.  To access the menu PRESS TV then MENU button then DVD/VCR button will allow you to change menu functions using left and right and select buttons. *TV button will access Menu screen BUT NO menu functions. * DVD/VCR button will NOT access menu screen but WILL control menu functions if menu is already displayed. May work with other sharp products, or other universal remotes? These original (RRMCG1330PESA) remotes run 38.00+ to buy new so try this FIRST!

Posted on Oct 29, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 78 Answers

On some models the menu button is on the front disguised as the volume up/down or channel up/down buttons. you have to push both up/down buttons on either one of these to bring up the menu.

Posted on May 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sharp13vtn100 tv/vcr is coming on only manually but not by original remote. gives me only channel 2,18 and vcr mode manually. how can i get the channel search ?


the remote could be bad get a unversil look up vcr codes not tv found thoses to work for combo unites give that a try or go to ebay for the right remote

Dec 24, 2013 | Sharp 13VT-N100 Combo

Tip

Acessing Menu with universal remote


We used a One4All model URC3021BOO remote. We programmed BOTH the TV function and the DVD/vcr button with code 0807.  To access the menu PRESS TV then MENU button then DVD/VCR button will allow you to change menu functions using left and right and select buttons. *TV button will access Menu screen BUT NO menu functions. * DVD/VCR button will NOT access menu screen but WILL control menu functions if menu is already displayed. May work with other sharp products, or other universal remotes? These original (RRMCG1330PESA) remotes run 38.00+ to buy new so try this FIRST!

on Oct 29, 2008 | Sharp 13VT-J100 13 in. Combo

1 Answer

Program channels without remote


Cannot be done but a replacement (original not universal) should be available from Sharp and not overly expensive.

Jun 13, 2012 | Sharp 13VT-R100 13 in. TV/VCR Combo

1 Answer

I have a sharp tv/vrc combo without a remote. I'm using a universal remote but wont let me get into the menu. I need to change it from cable to air. Can someone help?


For sharp TV-VCR Combo with universal remore control,

1/ Start by pressing SET & TV at the same time, the LED goes solid RED

2/ Press 009 or whatever code works for your TV.

3/ Confirm that you can now use your control to flip channels..

Then,
4/ Just press the blue button 2-/12. That allows you to change from cable to air and vis-versa. Hope that helps.

Ade

Jul 04, 2010 | Sharp 13VT-R100 13 in. TV/VCR Combo

1 Answer

We recently had a flood in our home and my Sharp 13VT-K100 was ruined. Do you know approximately what this TV Cost new? And is there a TV that replaced it? Thanks for any info. Patti


If you Google the model number or look at:

http://www.audioreview.com/pscTelevisions/TV-VCR,Combo/PLS_2729_830crx.aspx

It shows on the above address having a msrp of $269.00

If this has helped you, I do this here for free so take just a minute and give me a vote here.

REGARDS, SD TECH

Sep 16, 2009 | Sharp 13VT-K100 13 in. Combo

1 Answer

How do i switch from "air" input to cable input on a 13 in sharp tv/VCR combo unit


Hi

It will depend on your input set up but Page 13 of the user manual should help, if you do not have one try www.usermanualsguide.com/sharp/televisions/13VT-R100_R150 and download one.

Oct 23, 2008 | Sharp 13VT-R100 13 in. TV/VCR Combo

1 Answer

What's the code for the TV?!


Try these:

173, 095, 171, 004, 006, 012, 111, 112, 113

Jan 14, 2008 | Sharp 13VT-R100 13 in. TV/VCR Combo

4 Answers

Tamper proof when you don't have original remote


If you have a universal remote you have to hold the button that says toggle or a button equilivent to that for five seconds than the tamper proof light will turn off than you can you tv on I had to figure this out on my own.

Jun 23, 2007 | Sharp 13VT-R100 13 in. TV/VCR Combo

Not finding what you are looking for?
Sharp 13VT-K100 13 in. Combo Logo

729 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Combination Televisions Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68408 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you a Sharp Combination Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...