Question about Poulan Pro 42CC 2 Cycle Chainsaw, 18"

1 Answer

WHAT IS THE FUEL/OIL MIXTURE FOR A POULAN PREDITOR 2150 CHAINSAW?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 252 Answers

If using a good quality 2 stroke oil brand
mix it @ ratio 50:1 that is 100 mils of oil per 5 litres of petrol

or on a 1 litre basis it would be 20 mils of oil per litre
but !!!! if you are using generic 2 stroke oil from a garage
run it on 25:1 mix that is 40 mils of oil per litre of petrol

be sure to put required qty of in clean container 1st then add petrol qty to the can and give good shake , then fill your saw

cheers hope it helps

paul

Posted on Aug 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Poulan 2150 fuel line diagram


you can start by adjusting the air fuel intake by turning the adjustment screws in all the way then out 3 full turns then do half turn adjustments until its right

Jul 23, 2014 | Poulan 2150 Chainsaws

1 Answer

Poulan 2150 chain saw starts after priming and dies after a few seconds


Take the exhaust off so you can see the side of the piston, if it is scored or damaged it means it has probably been run without oil added to the petrol.
That can cause the problems you are having, if it is throw it away, its not worth repairing

Dec 14, 2012 | Poulan 2050 2055 2975 2150 2155 2175 Air...

1 Answer

Diagram for fuel line routing for a poulan 2150 chainsaw?


The 2150 has a remote primer, so there will be three pipes, the pipe coming from the fuel tank with the fuel filter on the end is the main fuel tube, this fits to the connection on the carb nearest to the pump cover on the carb ( alluminium cover held with a single screw ) the other connection on the carb has a pipe to the shorter of the two connections on the back of the primer ( suction side ) the longer connection on the back of the primer ( pressure side ) has a pipe back to the fuel tank, so the primer pulls fuel from the tank, into the bulb, and dumps it back to the tank, it does not push fuel into the carb, this way you can depress the bulb as many times as you like without flooding the engine.

Jul 05, 2012 | Poulan Pro Chain Saw 46cc 20"

1 Answer

Fuel mixture for Poulan 245 and 306 chain saw's


245 here:
http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/30945e6822106f5388256b3500246efa?OpenDocument

306 here
http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/9a98d7ae6c77deaf88256b350024ae42?OpenDocument

I use 50:1 in everything.
Fuel/Oil Mixture
  1. Use a quality 2 cycle oil and mix it to the OIL suppliers recommended ratio. Today I use Stihl 2 cycle oil mixed @ 50:1 in a Pioneer that I purchased new in 1980. There are no gouges or scratches on the piston or cylinder and I have no carbon build up on the piston top. The manual (on stone tablets) recommends 24:1. Over the years the mixture has leaned from 24:1 (Saw Recommendation) to 28:1 (Lawn boy mower recommendation) to 32:1 (Oil provider 2gal premium/8oz chainsaw 2-cycle engine oil - used for many years) and finally the last 5 (±) years 50:1 (1gal premium/2.6oz Stihl 2-cycle engine oil)
  2. Any fuel containing ethanol is not good with chainsaws. Mix what you expect to use within a few weeks. Anything over 1.5 months old use up in a 4 cycle engine. HTH
Lou

Jan 26, 2010 | Poulan Garden

2 Answers

Need air / fuel mix and hi and low idle settings for poulan preditor


Your manual says 40:1 (1 gal premium/3.2 oz quality 2-cycle oil). If you are going to tweek it anyway use 50:1 (1 gal premium/2.6 oz quality 2-cycle oil). Clean the air filter first. Lou

Nov 14, 2009 | Poulan Wild Thing 18" 40cc Gas Chainsaw -...

1 Answer

Need a diagram of the fuel lines on a poulan 2150. what lines go where?


You can View a Diagram of the Chainsaw here http://hayward.arinet.com/scripts/EmpartISAPI.dll?MF&app=ASP⟨=EN&TF=Mainfram...

Select the Catalog Poulan/Weed Eater. Then Select Poulan. Then Select Gas. Then Select Saw. Then Scroll Down to your Model Saw i.e 2150.

Regards
Marc

Apr 17, 2009 | Poulan Pro 42CC 2 Cycle Chainsaw, 18"

1 Answer

Need fuel/oil mixture ratio for a poulan 3400 chain saw. Much obliged!!!!


Hi, fuel/oil mixture is 40:1 for Poulan. Hope this helps.

Mar 01, 2009 | Poulan Garden

1 Answer

Adjusting carburator


as a starting point 1 turn on both

Jan 14, 2009 | Garden

Not finding what you are looking for?
Poulan Pro 42CC 2 Cycle Chainsaw, 18" Logo

507 people viewed this question

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Phil Walker
Phil Walker

Level 3 Expert

608 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...