Question about Projection Televisions

1 Answer

42" samsung plasma tv has sound but no picture, all wires cables plugged in correctly, picture just went of during viewing

Posted by on

  • billyman212 Apr 25, 2008

    Thank you Jamie, i will check out local dealers and e-bay for the ysus assembly part

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,267 Answers

This failure is on the Ysus assembly that seems to fail quite a lot on these or any other plasmas.

Posted on Apr 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

According to the description, the color wheel went out. Loud humming noise, color distortion. I got a color wheel and first, by mistake opened the back of the screen, tilted it out a little way and...


did you install the correct color wheel? Most of the samsungs had retooled bearings in some color wheels and often a jumper has to be installed for the color wheel to work properly. Your wheel should be a BP96-01103A another thing that can happen is the thin brown ribbon cable can get plugged in backwards and will prevent the color wheel from working also. That ribbon only has contacts on one side of the ribbon. I would double check that if the correct color wheel was received for your model.

Aug 08, 2011 | Samsung HL-R5668W 56" HDTV

1 Answer

HITACHI 42" PLASMA SOUND BUT NO PICTURE COMPLETELY BLACK


it can be the loose connection on circuit board .can you resold the all pcb joints.
i will hlp you.or give it to service proffesional.
nuwan.

Jan 19, 2009 | Samsung HCL4715W 47" Rear Projection...

1 Answer

No picture


Common faults that give you no picture and sound on Plasma are often related to Sustain board, buffer and cables problem.

In this case the cost will be affordable, ans surely worth.

In the unlikely eventuality that instead you have a faulty plasma screen , or a faulty digital control board (main board), the cost of repair may be high.

The only way to find out is by having the TV inspected by a technician.

The most common fault that gives you no picture and sound on plasma is Sustain board , lower buffer, or connector, that is repairable.

Jan 05, 2009 | Projection Televisions

1 Answer

I have a samsung 42' plasma hd ready tv, and when i turn it on the sound only works for a minute, then the sound goes off, but i stil got a picture with no sound, what can be the problem?


If it has the legs connected and if they insert inside the back of the TV, then look up there with a flashlight to see if there are any wires in the insert holes of the stand. if there are you should be able to inspect them(red/white wires) to see if they have been broken. if they are, take it to be repaired.

Aug 16, 2008 | Projection Televisions

1 Answer

The screen on my 1 year old 42 inch Akai plasma tv suddenly went blank although I still have sound. Any clues?


Reset the cable/sat box and tv by turning them off, unplugging them both from the wall outlet, and replugging them after 30 seconds. See if you get pictue back when they get the correct handshake. also, make sure that there are no loose cables going into the TV or into the cable/sat box. You can try using a different type of connecting cord from the cable/sat box to the tv to make sure it is not a bad connecting cord.

What type of cable is connecting your cable/sat box to the TV? Is it HDMI?

Are you using a video game system on the plasma?

Mar 07, 2008 | Projection Televisions

1 Answer

Toshiba 42 inch plasma tv


sound no picture. well not entirely bad this idicate your signal getting through and you have partial power. however this could mean that the actuall panel is faulty. if so new set time. What is the model and make of set.

Jan 17, 2008 | Projection Televisions

1 Answer

I have no audio on my 42" Samsung plasma tv


This happened to me also. It had to be taken apart. The audio connector on the motherboard had come lose. Hope this helps.

Dec 04, 2007 | Samsung HCN4226W 42" Rear Projection...

7 Answers

Samsung HCN4226WX/XAA Rear Projection 42" TV Wont Turn On


take off the back there is a board at the top right with two black stk-392-040 chips on it unplug the red connector at the left side of the board then plug set up and see if it comes on if so the chips on the board are bad or replace the board about $100.00

Aug 02, 2007 | Samsung HCN4226W 42" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...