Question about EliteGroup ECS L4VXA2 (CDL4VXA2) Motherboard

1 Answer

I HAVE A HUGE PROBLEM....I HAVE AN ELITE MOTHERBOARD L4VXA2 AND WAS WORKING FINE WITH AN ATI RADEON X1300PRO GRAPHICS CARD 256MB AGP 8X....BUT AFTER SOME TIME...I HAVE A PROBLEM.....I PRESS THE START BUTTON THE COMPUTER IS SWITCH ON BUT THE SCREEN DOES NOT APPEAR..AND THEIR IS A STRANGE "BEEP" SOUND COMING FROM MY MOTHERBOARD...BUT WHEN I TAKE OFF THE 3D CARD EVERYTHING IS ALRIGHT! I DONT KNOW WHAT IS THE PROBLEM NOW..I HAVE TRIED TO CHECK THE BIOS FOR THE AGP SLOT AND IT SAYS THAT IT ONLY SUPPORTS 4X AGP!! HOWS THAT POSSIBLE??? IT WENT FROM 8X TO 4X AGP SLOT AND NOW IT DOES NOT SUPPORT MY ATI RADEON X1300???!! is it possible that the problem is the small battery of the motherboard?? shall i replace it with a new one? i know that low-batt can cause some problems..!PLS HELP! THANKS! ALEX.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 624 Answers

Hello and Welcome to FixYa Alex.
No, the battery isn't the problem as you stated that without the Card your PC runs smooth, what i can guess is that the Graphic card is gone, and to confirm this you need to cross-check it on some other PC that can support it. If on that PC the problem is same then its clear that the Graphic Card is gone. And I guess you know that if a Graphic card is of 8x Video output interface, and the Board interface is of 4x, then the Card will run under the compatibility of 4x. A 8x Graphic Card is actually 4x/8x Graphic Card.
I hope you have a clear picture now, and yes I know you will be wondering that how come the graphic card can burn, then fellow never ever trust electronics, they are arbitrary.
If you have any questions do ask, I'm here to help.
If you think I was of help, your token of appreciation in the form of rating will be esteemed.
Concerned, Nooh

Posted on Jul 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dell dimension 5100


If you are having problems with your video card

the drivers might not be installed correctly you might have to uninstall the graphics card restart your computer then reinstall the graphics card and its drivers

If your computer came with a motherboard disc the drivers could be on it

Click start control panel administrive tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! or a red x right click select reinstall drivers or

you might need to download one


http://download.cnet.com/video-ati-ati-radeon/3000-2108_4-175861.html
This package supports the following driver models:

  • 128MB ATI RADEON X600 SE
  • 128MB ATI RADEON X600 SE Secondary
  • 256MB ATI RADEON X600
  • 256MB ATI RADEON X600 Secondary
  • RADEON X300 SE 128MB HyperMemory
  • RADEON X300 SE 128MB HyperMemory Secondary
  • RADEON X300 Series
  • RADEON X300 Series Secondary
  • RADEON X600 256MB HyperMemory
  • RADEON X600 256MB HyperMemory Secondary
  • 128MB ATI Radeon X1300
  • 128MB ATI Radeon X1300 Secondary
  • 256MB ATI Radeon X1300PRO
  • 256MB ATI Radeon X1300PRO Secondary
  • ATI Radeon Xpress 1100
  • ATI PCI Express (3GIO) Filter Driver

Hope this helps you




Aug 07, 2011 | Dell ATI RADEON X300 SE, (128 MB) PCI...

1 Answer

What graphics card can i get for a ms-7071 v1 motherboard


One AGP (Accelerated Graphics Port) 8x/4X slot. First is the Nvidia Geforce Fx 5500 256MB and the second is ATI Radeon™ 9550. These two video cards are supported by your motherboard. Have a nice day.

Apr 13, 2011 | MSI PM8M2-V Motherboard

1 Answer

Sir, where I can dowload the driver for win XP for ATI Radeon 9000 256MB DDR AGP Video CARD (free) thank


Hello
you can download driver from AMD/ATI official site by clicking HERE
Good Luck, and do rate the solution if got help

Dec 11, 2010 | ATI RADEON 9000 AGP 8x DDR Video 256 MB,...

2 Answers

Looking to upgrade my graphic card one last time. Currently running a RADEON X850 AGP 8x. Dell XPS, 3 GHz Pent4 w/875P chipset.(800MHz Bus Clock, 400MHz DDR, Hyper-threaded (2)-- I would like the highest...


I wouldnt know whether you just like ATI Graphics cards, or it was recommended for you. But I would still give you my straight forward advice, and this is : Go for NVIDIA Ge-FORCE graphics cards. Trust me, you would thank me for it later.
I didnt want to recommend a specific model for you though, because of our difference in country locations, but just try and get a high memory (like 256MB and above), NVidia Graphics card that is compatible with your system. Also check out the available slot on your system that you will use for it first before you go (So that you wont go and get an AGP slot card when you have just an open PCI Slot). I'm telling you this because I've used A LOT of graphics cards also (Over 10 years now)! and I've come to that conclusion that NVIDIA makes the best graphics card.
Hope this helps you out.
Goodluck!

Jul 15, 2009 | ATI AGP8X (128 MB) Graphic Card

2 Answers

Powercolor x1650 512mb AGP problem


The one you bought is 16x but your MB supports only 8x..................sodeep

Jun 18, 2009 | Power Color 256MB PowerColor ATI RADEON...

1 Answer

CONNECT 3D RADEON 9550 256MB display problem


That graphics card i'm afraid is not good for todays games, same thing goes for your pentium 4. A driver update may fix your problem but that card and cpu need changing, probably a new motherboard would be needed also to fit a pci express graphics card along with a core 2 duo processor.

May 25, 2009 | ATI RADEON HD 2400 PRO Graphic Card

1 Answer

ATI Radeon 9600XT


Hi and welcome to FixYa,

Appreciate the direct "ask Me".

Some motherboards require a separate AGP port driver to be installed before the drivers of the AGP video card could be recognized. This is specially so for 8X. Perhaps the solution requires that you install the complete motherboard drivers including the AGP port before installing the ATI 9600XT drivers.

Good luck and Thank you for using FixYa. Happy Holidays.

Dec 17, 2008 | ATI RADEON 9600XT 256MB DDR DVI&TV Out...

1 Answer

Is visiontek a radeon hd 2400 pro agp 8 compatible w/ p4s800- mx?


ATI has recently written some better drivers for the 2400 Pro AGP cards,... Make sure the setting in the BIOS for the motherboard is set to the AGP or PCI for primary video. For AGP, make sure that you have the power from the power supply connected to the video card. Make sure that your motherboard does support 8X AGP video cards. If you are not sure, please check with motherboard manufacturer for compatibility.

Dec 13, 2008 | VisionTek ATI RADEON HD2400 Pro Edition...

1 Answer

Intel P$ 1.8 mhz on a D845HV/D845WN board


Before removing your current card swap video outputs on the PC. If currently connected to the VGA output switch to the HDMI connector AT the video card. Use the HDMI to VGA adapter that came with the video card. Check & see if the display loads Pc starts. Taking the information directly from your motherboard manual pg. 25, your AGP video can only run at, AGP supporting 1.5 V 4X AGP cards. The 9600pro runs at 8x & it is not backwards compatible. (able to run at either 8x or 4x). You could run the Sappire ATI Radeon 256MB 9550 DDR AGP 4x/8x 1.5volt card.
Here is one site: http://www.colordrives.com/sapphire-ati-radeon-9550-256mb-ddr-agp-4x-8x-video-card---retail-box.html
When you do get the video card be sure to set your bios AGP to the correct size as listed in your manual pg. 109 subsection 4.4.7
I hope this helped.

Feb 20, 2008 | Intel Motherboard

2 Answers

ATI Radeon Saphire 9600Pro AGP Graphics Card


It appears that the mobo is AGP 8x, and this video card also appears to be AGP 8x - so you should be able to use it just fine.

Jan 26, 2008 | Gigabyte GA-8IPE1000-G (MBGA81PE1000G)...

Not finding what you are looking for?
EliteGroup ECS L4VXA2 (CDL4VXA2) Motherboard Logo

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top EliteGroup Computers & Internet Experts

David
David

Level 3 Expert

778 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Jerry Umali

Level 3 Expert

979 Answers

Are you an EliteGroup Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...