Question about Mitsubishi WD-52525 52" Rear Projection HDTV

2 Answers

I have had a Mitsubishi DLP 52525 for 6+ years now and recently the green timer light started to rapidly blink when the unit was turned on and it continued to blink without the picture coming on. After discconnecting the power and then using the system reset button, the problem remained. I have hit the system reset button but to no avail. There is nothing in the manual that deals with what is indicated by a constant blinking green timer led. Looking for suggestions.

Posted by on

  • Shahid Electronics
    Shahid Electronics Aug 08, 2010

    Sustain boards which control video and sound.???????????????
    Wrong !!!



×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

I don't know about nettiser's credentials, but I've found plenty of people who would disagree with his/her assessment.

The flashing green timer light after a lightning storm seems to be a very common problem with old Mistubishi rear projection TV's. A friend and I had the exact same problem.

Using this and other sites, I spent $36 bucks and a little time with a soldering iron to replace the capacitors on the DM board and got mine up and running (WS55859). I've never really worked on electronic circuit boards before, but the helpful advice at these sites got me up and running. Definitely check it out before you hire someone or replace your TV:

Repair Kit with instructional CD available at:
http://www.tvrepairworld.com/mitsubishi_repair_kits
for under $40 plus shipping.

Discussion of process in detail at:
http://www.hometheaterspot.com/showtopic.php?tid/137881/
for the WS55859 model, which may be a little different.

Posted on Aug 03, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,090 Answers

And I am sure you wont like the suggestion one bit!

Blinking lights without picture and sometimes accompanied by a clicking sound( but not always) is indicative of failed Sustain boards which control video and sound.It is also possible the Power board is also involved The repair on one of these models will set you back about $400-$500 or more depending on the repairer. It is not DIY as you require an understanding of voltage testing at the circuit points on the schematic and a total reset of the convergence unit.
If you had a storm revcently it is possible that a spike caused this. You may be able to claim under FUSION in your home insurance policy/ Also in the future protect expensive electronics by incorporating an anti spike power board

Please rate my help++++Thanks for using FIXYA

Posted on Jul 31, 2010

  • dennis bullard Aug 04, 2010

    Note to fedupintx

    As an electronics engineer I feel it is more responsible to advise against DIY on large TV's due to High tension Voltage and radiation.
    What you have to realise at "Master level" is that you have yet to come to the understanding that many of the people seeking help on this forum are not skilled Otherwise they wouldn't be asking the question necessarily.

    Reading circuit diagrams, using a soldering iron, and understanding the terminology and complexity of rebuilding a damaged TV and retuning convergence is often beyond their capability. It is also downright dangerous to suggest they attempt to take on such a task. If you do some research within the forum you may also come to find that many who jumped in to do their own repair to save a few bucks are still on here for a second and third time trying to find why they still have the problem, as well as still throwing dollars at it, despite having re-soldered capacitors or swapped boards, it is not the final answer.

    Why did these components that are obviously damaged stop working in the first place? Our experience shows that the obvious is not always the answer to the problem. It requires skill with multimeter and circuit diagram to ensure other areas are within tolerance and the problem is not repeated and 3 times the cost of doing it properly the first time.

    It is the aim of FIXYA to have satisfied customers who receive reliable and helpful information that gets the best fix, rather than encourage gungho cowboy or board swapping jockey type approaches to their problem.

    Yes you may have been able to do your own with a kit and CD, but is does not mean that all who take your advise can achieve that goal, or that the problem presented is as vanilla as yours perhaps was was.

    Cheers


×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blinking Green Light on Mitsubishi DLP 52525


the circut that detects the bulb has been also failing in these sets
and the conversion chip that controls the picture , and the transformers are not putting out the full power they are supposed to.
this set will need to be tested to determine the exact cause or causes

Oct 18, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Blinking Green Light on Mitsubishi DLP 52525


Try the ballast that gives power to the lamp,I have the same problem,got a lamp for $109.00 at discount-merchant,thisa is my second problem with this tv in about 3 years,sucks.

Dec 01, 2008 | Mitsubishi WD-62525 62" Rear Projection...

1 Answer

Blinking Green Light on Mitsubishi DLP 52525


The 52525 is definitely going to either:

1. have the caps on the FMT/DM board replaced (not something I'd recommend you do yourself)

2. have the electrical chassis rebuilt (as sometimes, you can replace the caps and still have the problem).


wait time: 4-8 weeks
cost to rebuild: $400-$500
cost for labor: $200-$400

Oct 13, 2008 | Mitsubishi WD-52627 52" Television

1 Answer

Blinking Green Light on Mitsubishi DLP 52525


Replace the 1000uf capacitors on the DM board. thats whats causiong the problem. If you need further help go to this link they have your service manual available for emailing after purchase and that will entitle you for free tech support and one of their techs can fix those sets in his sleep he will walk you through the repair which parts are only about 20 dollars to fix the problem.
http://servicemanuals.vstore.ca/

May 07, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Blinking Green Light on Mitsubishi DLP 52525


check the pico fuses on the reverse side of the DM , Just check them in circuit for continuity. let me know how you make out, and if you need any more advice lert me know

Mar 18, 2008 | Mitsubishi WS-48513 48" Rear Projection...

1 Answer

Blinking Green Light on Mitsubishi DLP 52525


the dlp will most likely need a qualified mits repair center to take over for you. repairing that set is pretty involved. and the parts you would need are not available to the public.
on your 48" CRT projection check the DM module for 4 vented 1000mf 16v capacitors. replacement should get you tv working great

Feb 20, 2008 | Mitsubishi WS-48513 48" Rear Projection...

2 Answers

Constant green blinking timer light


http://www.chrisandnat.com/Projects/BlinkingTV/blink.htm http://www.jeremyburns.com/Mitsubishi-Green-Blinking-Light-Fix.pdf
http://www.fixya.com/howto/h159332-mitsubishi_dm_board_repair
http://hdtvoice.com/voice/showthread.php?t=32186
Suspect the DM PCB part # 934C116002

Jan 07, 2008 | Mitsubishi WD-52525 52" Rear Projection...

2 Answers

Blinking Green Light on Mitsubishi DLP 52525


No problem, do self diagnosis test, read threads here or goto ctechnicians.com get error codes first and get back with me.

Dec 17, 2007 | Mitsubishi WD-62825 62" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

603 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1210 Answers

The Knight
The Knight

Level 3 Expert

74185 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...