Question about Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

Washing machine won't continue it's cycle. The amount of minutes left keeps blinking and it won't start when you press the button. Help

Posted by on

  • carolyng972 Jul 31, 2010

    Thank you so much for the suggestion. Acutally I unplugged the machine and plugged it back and it started to work. Great analysis.
    Perhaps I won't need a new board. We'll see but now I know what the problem is.
    Thank you again. Excellent diagnosis

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,090 Answers

The HE3 is fraught with problems as was the HE2 I suspect your problem lies in the Motor control board ) user interface) as this is where this problem usually is centered. The cost of replacement board is $140.00 and is a simple unplug replug fix once the board is exposed from behind the covers. Contact SEARS for parts.

Please rate my help++++Thanks for using FIXYA


Posted on Jul 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My washing machine will not turn on.


I suggest you rapid reading of alarms.
  • Press the START/PAUSE button and the nearest option button simultaneously for at least 2 seconds: the LEDs initially switch off, and then display the flashing sequence indicating the last alarm.
  • To display the previous alarms, press the button to the left of the START/PAUSE button in sequence.
  • To return to the last alarm, press the START/PAUSE button.
  • The alarm continues to be displayed for the amount of time required, and then the display returns to its normal operation.
  • While the alarm is being displayed, the appliance continues to perform the cycle or, if in the programme selection phase, it maintains the previously selected options in memory.
26000017-dafg3tq3i3ijxe45amgg4vtr-3-0.jpg

Dado

Dec 09, 2015 | Electrolux Washing Machines

1 Answer

Washing machine has 1 minute left on cycle stuck door wont open programme not finished


Try the following, may work:
Press the Start/Cancel button together until all the console Led's illuminate
  1. Press both Start/Cancel and On/Off buttons together until 'd off' appears
  2. Default screen should return. Switch off.
  3. Wait for 2 minutes to try the door. If helped click.

Apr 18, 2013 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Whirlpool WFC7500VW1 won't start


My Whirlpool washer model WFC7500VW1 will not start--the green Start button keeps blinking and the red Door Locked button keeps blinking. I do not get any error codes.

Feb 23, 2013 | Whirlpool duet Washing Machines

1 Answer

My AEG Lavamat 52810 has become faulty. The machine pauses about ten times during the cycle and the lamp marked "door" blinks. When I press the start button, it stops blinking and the cycle...


Hi Richard from retired Englishman in SW France,

There is likely to be a problem with either the lid/door solenoid/lock or the 'lid/door closed' sensor becoming apparent with the extra movement of washing, requiring a service engineer's attention I suggest. Sorry ;-0(
If this has assisted and
/or clarified the situation for you please consider a 4 thumbs up on our rating.
Thanks and good luck!
John C

Aug 14, 2011 | Washing Machines

1 Answer

WASHING MACHINE WON'T RESTART!!


try unpluggin unit for 10 or 15 minutes sometimes a computer will lock up. If this doesnt fix it there is a tech sheet located behind the lower removable panel (3 screws down on your knees and look up a little between the door panel and lower panel. Tech sheet can help you with minor problems but be careful parts are expensive and non-refunadable (electrical parts). always disconnect power before working on unit

May 30, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

My washer had 1 minute left before the spin cycle was complete.


Push and hold the START button for three seconds if you want it to finish off that last minute.

...or...

Push and hold the PAUSE button for three seconds to stop the cycle.

Peace.

Marco

Jan 31, 2009 | Kenmore Elite 45986 Front Load Washer

2 Answers

I need to cancel a washing cycle in the middle of the cycle.


usually pressing PAUSE/CANCEL twice cancels the cycle and shuts it off allowing you to then re-start the cycle. If not try unplugging it and see if it resets to allow you to start cycle again.

Dec 07, 2008 | Kenmore Elite 45986 Front Load Washer

4 Answers

Relic digital watch


Hold down the reset button until the hour digit starts to flash then to change the hour press the start/stop button then to change the minute press the mode button and keep pressing start/stop button until you get to your desired minute and just continue those steps through the date.

Oct 12, 2007 | Watches

2 Answers

Paused. now stuck. cannot open, turn off, etc.


Unpluggin the machine is pretty much the only way to reset it.Leave it unplugged for a couple hours if that doesnt work its most like a control board issue

Mar 15, 2007 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Kenmore 3.8 cu. ft. HE3 Front Load Washer Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2180 Answers

fordexpert

Level 3 Expert

5520 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...