Question about HP LaserJet P2015dn Printer

1 Answer

Cannot install printer

Cannot install this printer. Previously it was a network printer, now i want it to be a local printer.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

On the printers and devices folder there must be an icon for your printer, right click it
go to properties
then ports
and then select the local port option
finally hit on apply to save the changes
this should change the port type
good luck

Posted on Jul 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Vista driver


The print driver solution for this product is included with the Microsoft Windows Vista operating system and is already on the computer. No special driver download is necessary for this product.
Please follow the simple instructions below to easily get the product working with Microsoft Windows Vista Operating system.

Installation Instructions

Direct Connection (Parallel & USB connector)

  1. Verify that the printer is turned ON.
  2. Connect the Universal Serial Bus (USB)/ Parallel (IEEE 1284) cable to the printer and to the computer
  3. Click on the Close button when the message "Your devices are ready to use" is displayed in the screen.
  4. The printer is now ready to accept the print job.

Wired Network & Bluetooth Connection

note.png
NOTE:For Bluetooth connected printer, please ensure that the printer's access mode is set to public mode for detection.
  1. Verify that the printer is turned on.
  2. Click Start > Control Panel and then select Printers .
  3. Click on Add a printer .
  4. Click Add a network, wireless or Bluetooth printer . A list of detected wired network or Bluetooth printers will be displayed.
  5. Select the printer you want to install and click Next . Follow the on screen installation instruction to complete the printer driver installation.

Wireless Connection

  1. Verify that the printer is turned ON.
  2. Ensure the printer's wireless network setting is set to the correct wireless profile matching the local wireless network/computer's wireless card setting.
    If you have previously configured the printer's wireless network setting, matching local wireless/computer's wireless card setting, please proceed to step 3.
    if you have NOT previously configured the printer's wireless network setting to match local wireless network/computer's wireless card setting, please follow the steps below.
    To set wireless network settings in an infrastructure network
    Connect the printer to the computer with the cross cable (included with the printer) or connect the printer to the network with a network cable.
    Press the configuration button once to print a configuration page.
    Open web browser, and type in the IP address that has been assigned to the printer.
    Configure the printer's wireless setting to match local wireless network/computer's wireless card setting.
    Unplug the cross cable/network cable.
    Activate the printer wireless network, activate the computer's wireless network profile.
    Proceed to step 3.
    To set wireless network settings in an ad hoc network
    Do the following to reset the printer's network settings:
    1. While pressing the Configuration Page button, press (Resume button) three times.
    2. Wait about 20 seconds, and then press (Power button) to turn off the printer.
    3. Disconnect the power cord from the printer.
    4. Wait about 20 seconds, and then reconnect the power cord.
    5. Press (Power button) to turn on the printer.
    6. Open the configuration utility for the computer's wireless network card, then create a new wireless profile with the following values.
      • Communication mode: ad hoc
      • Network name (SSID): hpsetup
      • Security (encryption): disabled
    7. Activate the wireless profile.
    8. Wait two minutes for the printer to obtain an IP address, then print a wireless configuration page to verify the following for the printer's network settings.
      • Communication mode: ad hoc
      • Network name (SSID): hpsetup
      • The IP address is NOT 0.0.0.0
    9. If one of the above conditions is not true then repeat the preceding steps. Proceed to steps 3 below.
  3. Click Start > Control Panel and then select Printers .
  4. Click on Add a printer .
  5. Click Add a network, wireless or Bluetooth printer , a list of detected printers will be displayed.
  6. Select the printer you want to install and click Next . Follow the on screen installation instruction to complete the print driver installation.

Dec 15, 2013 | HP DeskJet 450wbt InkJet Printer

1 Answer

How can i set my printer to my roter


This is non network printer, you can't print just like a network printer , but you can install the printer in local system and share it & install the drivers in desired systems through local system where printer was connected. It will work like a network printer but scanning is not possible to other systems except local system.And one more drawback is your won't get print, if local system is switched off..

Nov 21, 2011 | HP LaserJet 3050 All-In-One Printer

1 Answer

Already installed driver from downloading online. cannot find driver printer in the devices and printer option of the control panel. cannot find driver when i started printing...


If you have not previously installed your printer or you did an uninstall before downloading the new driver, you now need to add the printer using the new driver.

In Windows 7, click on Devices and Printers.

At the top of the window you will see Add a device and Add a printer

Click on Add a printer.

Choose either Add a local printer or Add network, wireless or Bluetooth printer.

Follow through the choices and if the install program is not able to find the dowloaded driver, point to the location where your driver was downloaded. If you did not make note of the location you could run a search or download a second time making sure you save the driver to a location you can remember. You can then say Have Disk when asked and then browse to the location you saved the printer driver on your computer

If you have the correct driver for your printer and operating system the printer should complete installation



Dec 22, 2010 | HP PSC 1410 All-In-One InkJet Printer

1 Answer

I have a Belkin router N300 do I just plug in the printer Lexmark cable to the router and that is it.


To make my Lexmark e250DN work on the network using my new Belkin N300, I had to do this:
1. Install router as per Belkin instructions. 2. Power off printer, then connect Lexmark printer to the router. Power on printer. 3. In a Browser, go to 192.168.2.1 which is the Router's IP address. 4. Click on DHCP Client List. You will see a list of the "computers" connected to the router, which includes the printer. Your printer will have a very long alphanumeric Host Name (mine began with E00000) Note the IP address (something like 192.168.2.4) That is the printer's IP address. 5. In Control Panel, Printers & Faxes, a) if the printer was previously installed with a different router, edit its settings to use the new IP address; b) if the printer was not previously installed, ADD a Network Printer at address http://192.168.2.x (x being whatever your DHCP client list showed).
That should do it.

Jun 25, 2010 | Belkin (F5D7230-4) Router (587009)

2 Answers

Hp printer wont print through print server


Share printer option needs to be turned on
Realize that the scan option only funtions on local connection

Aug 11, 2009 | HP PhotoSmart C4480 All-in-One Printer ...

2 Answers

Can not print 5610 v all in one


hi,
HP Officejet 5610 All-In-One InkJet Printer has few common problems. Such as Driver CD lost,Scanner does not work, Connection problem etc. For find all these software solution just clickhere....

733bedd.jpg8d0783d.jpg

http://www.hp.com/printer/prob676ijt65/solution

ab78

Jun 24, 2009 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Xerox 6180 lost CD...


the local or network option happens when you install it, install as a local first, then select it as a network option, assuming you have xp.


Aug 19, 2008 | Xerox Phaser 6180N Laser Printer

1 Answer

Cannot find canon lbp 5000 printer in the network.


You should check the firewall settings. Both AVG and Vista firewalls treat the printer as a foreign network, rather than a device. You can go into the settings in either and nominate the printer as a device. It will then display on the network for selection as a printer.

Jul 16, 2008 | Canon LASER SHOT LBP-5200 Printer

1 Answer

Install of IBM infoprint printer drivers


make sure you are logged on a the Administrator to the computer then try installing..

Dec 26, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
HP LaserJet P2015dn Printer Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...