Question about Washing Machines

1 Answer

How do I replace the lid switch on my Kenmore Series 80 washing machine I have the part

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,323 Answers

Hi


To replace the lid switch in a Whirlpool-built direct drive washer you’ll need to open it up. This washer use plastic end caps to cover the console screws. Just remove the console end caps and the console retaining screws are right there. Once you've removed the console screws, flip the entire control console up and back to reveal the cabinet retaining braces. After the cabinet is pulled back from washer you’ll be able to see the lid switch. You can inspect whether the lid switch is disconnected or burnt, use a multimeter to check the continuity of the lid switch.


Please post back for any further assistance.

Daniel

Posted on Jul 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore 80 series fills with water then doesn't


the lid switch under the control panels bad replace it and it will again wash,they just unsnap out of the top of the cabinet after you remove the control panel

Jul 07, 2011 | Kenmore Washing Machines

2 Answers

How do you remove the top off the washing machine to replace the lid switch in a kenmore super capacity 80 series?


The following link explains step-by-step how to replace the lid switch on a Kenmore top loader:

http://www.fixya.com/support/r3557193-replacing_a_lid_switch

If you have any questions about this repair, please post back and let me know. I hope you find this information helpful.

Oct 26, 2010 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

How do I replace lid switch in a Sears Kenmore 80 series, model 1


The following link explains step-by-step how to replace a lid switch on a Kenmore top loader:

http://www.fixya.com/support/r3557193-replacing_a_lid_switch

If you have any questions about this repair, please post back and let me know. I hope this helps you.

NOTE: Kenmore is manufactured by Whirlpool so these instructions will apply.

Apr 07, 2010 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore Series 80 washing machine won't drain after wash cycle. The machine just stops.


Check the lid switch under the edge of the top where the lid closes. When you are about 1 inch from closing the lid you should here a little click sound. That is the switch closing. I fyou do not here the click then the switch is bad.

Sep 01, 2009 | Kenmore Washing Machines

1 Answer

I have a series 80 top loader. It filled and


Screws holding the lid switch was broken. Had to replace lid switch.

Jun 11, 2009 | Kenmore 24902 Top Load Washer

1 Answer

Kenmore 80 series lid switch


The following link explains how to replace one:

http://www.fixya.com/support/r385198-replacing_lid_switch

If the switch DOES require replacement, a new one can be purchased on line at searspartsdirect.com, repairclinic.com or appliancepartspros.com. Just use your model number as your search criteria. All three sites offer competitive pricing, so shop all three for the best price. If you still need assistance, please contact me and let me know. If my diagnosis is not correct, please post back and elaborate a bit more so I can assist you further. If your washer is not configured this way, or if you still have questions, please let me know.

May 11, 2009 | Kenmore Washing Machines

1 Answer

Kenmore washing machine 80 Series 110 20802 990 Will not agitate or spin"


You need to replace the Kenmore Washer Lid Switch. I had the same problem so being lazy I would just push down on the washer's lid and it would push the lid switch further down. making the water drain. after a while I just replaced the lid switch.

Apr 22, 2009 | Washing Machines

1 Answer

Kenmore Washing machine


ck lid switch also ckd hinge screws that looks like newer moder with switch under left side of console try pressing left rear corner of lid or listen for clock when lid is shut slowly

Jun 03, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1461 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Brad Brown

Level 3 Expert

15628 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...