Question about HP ProLiant ML370 G3 Server

1 Answer

I want to install a new scsi but when my os windows small business server 2003 it gives me "setup either detected multiple disk in your machine that are indistinguishable or detected raw disk(s). Setup has corrected the problem, but a reboot is rtequired" even after the reboot it still shows the same thing.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 106 Answers

Using the ACU (array configuration utility) create a raid 0 with this drive after the hard drive is being formatted and is configured as raid 0 (no redundant) restart the server and the hard drive should be detected as a new logical volume with a assigned letter "D" "E"
ACU

Posted on Aug 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hard disk drive not detected during installing windows server 2003


It depends on what type of drive you are using. Plus, you may have to specify the array controller drivers if your are using the SAS (Serial Attached SCSI) drives.

May 22, 2013 | Dell POWEREDGE R610 (4640223) Server

1 Answer

I have a dell power edge t300 server. i need to install windows 2003 server. i dont have dell cd for windows 2003 server. while installing the hard disks (scsi) are not detected and setup aborts. how can...


If your Dell server cam with the Windows Server 2003 software, you should be able to order a replacement cd. Go to http://www.dell.com/support If the software was not packaged with the server, you will have to buy it at http://www.microsoft.com/sales

If you have any additional questions contact me by clicking on the "Add a comment" link located under your problem description on FixYa. Also, if you believe that this information was helpful to you, please rate my solution using FixYa's "Solution Helpful" rating scale.
Best regards,
Yavacotech

Jun 23, 2011 | Dell PowerEdge T300 Server

1 Answer

How to install scsi driver for hp prolaint ml 350 server and then install server 2003,because my os 2003 is currpted.


windows server 2003 enterprise edition with SP1 or SP2 , can detect
SCSI driver automatically.

Apr 22, 2011 | HP Compaq ProLiant ML350 G3 Server

1 Answer

Boot problem with IBM xseries 306 - SCSI Drive and SATA drive os is on scsi drive and wont boot if sata is installed. how do i force machine to skip sata drive


I think first u disconnect ur all HDD to server. then u enable ur booting HDD or operating HDD...and setup again....

Another way: If u have original windows ..u can use windows recovery disk ...then recover ur missing file(kernel).

Thanks

Dec 21, 2010 | IBM eServer xSeries 306

1 Answer

I have dell 4600 pe serveri want to install Server2003 os i have configured raid 1 on the machine every thing is fine but! on boot process it display message no Boot Device Found Press F1 to continue F2...


The hard drive needs to be set as the first SCSI ID device boot device..
The hard drive needs to have the jumper set to SCSI ID 0, the CD and FDD can be set to SCSI ID 1 and SCSI ID 2. No SCSI devices can have the same SCSI ID number unless it is on a different SCS controller.

Jul 01, 2010 | Dell PowerEdge 4600 Server

1 Answer

Configure & install two scsi disks scsi disks in ML 150 G2


The SCSI driver is required to installed during the initial boot up for installation when additional drivers are asked .the new models dont come with a Floppy drive so an external floppy drive can be used .The detection of HDD s must be at the startup by the Bios os SCSI card.

Feb 24, 2010 | HP ProLiant ML150 G2 Server

2 Answers

New install scsi hard disk no detect in ibm x3400 server


you will need to add the new drive to your array bbfore it will how up to be formated do this throught the array configuration util



Regards Al "alstech"

May 26, 2009 | IBM x3400 Server

1 Answer

SCSI hard disk is not detecting in IBM xSeries 346 Server


Hi
While running the windows 2003 setup (winnt.exe), it will ask for SASI driver, you have to add the scsi driver... then windows 2003 os will detect the HDD.. then it will install..

Apr 07, 2009 | IBM eServer xSeries 346

1 Answer

Installing Windows Server 2003 on a preinstalled Vista OS


The reason it is showing "no hard disk" is because you have a SATA hard drive, and there is no SATA support on the WS2003 software, so it doesn't even "see" the drive when trying to install.

What you can do is download SATA drivers for your hard drive to your machine. Once downloaded and/or extracted, restart the installation but choose F6 to load "SCSI or 3rd party drivers", then point to the downloaded drivers.

Your installation will then load the SATA drivers, thereby recognizing the hard drive and you'll be able to successfully install Windows.

Hope this helps - remember to rate :)

Oct 06, 2008 | Microsoft Windows Server Standard 2003 for...

1 Answer

Windows Server wont load


You need to install the raid drivers during the OS installation otherwise the setup program will not recognise it. At the beginning of the setup, just after the black screen disappears and the setup screen appears, it will say at the bottom: "Press F6 if you want to install third party RAID / SCSI drivers" or something along those lines. That's where you dive for the F6 button and install the drivers from floppy disk. I'm sure you know where to get the drivers from, if not, do reply and ask. Good luck!

Aug 31, 2007 | Celestica A8440 Server

Not finding what you are looking for?
HP ProLiant ML370 G3 Server Logo

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...