- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
turn on your video and start something playing, press the speakers button repeatedly until the sound comes back. this should bring back your front speakers, if it doesn't, double check your speaker connections and sound field program.
the speakers button should cycle through all available front speaker options.
Does the TV have an audio ear phone jack? if it does get an audio jack that fits the TV Audio out Phone plug. Then connect it to an Audio Amplifier that would run the speakers.
This is one way...or you can solder onto the speaker weirs and run that to the audio amp that is connected to the wall spekers.
One of those things that were tested is not right. You'll need to do a process of elimination. First try connecting one local speaker and see if you actually are getting output. If not then you know the problem is with the receiver or connector.
You can also hook up something else to your multi-speaker wiring and see if it works through that wiring and speakers, ie a tv or anything that can use the same kind of connector you're using.
If you get sound out from something else then again you know it's with the reciever, either a problem with the settings or the unit itself.
Obviously you can also double check the settings too and make sure they are right.
It has to be one of those things, a connector, wiring, a setting or the unit itself.
time to reset the microprocessor. See page 87 in manual.
1) switch off the unit using the main unit's power operation (small power button)
2) hold the PURE DIRECT button and DIRECT button at same time and turn the main unit's power operation on.
3) wait for entire display to flash in 1 second intervals
now the speakers need to be set up again but zone 2 will be working. i suspect a power surge causes the microprocesser to be corrupted. i put a power surge protector and have not had problems (lately).