Question about Lincoln Conveyor Oven - 1132-000-A

1 Answer

TEMPERATURE READOUT NEVER REACHES POTENIOMETER DAIL SETTING.ELEMENTS ON OUR DOUBLE STACK 1132 IMPINGER ALL READ CONSISTANTLY 28 AMPS @ 208V.SWAPED THERMOCOUPLES BOTTOM TO TOP TEMP DISPLAY DID IMPROVE BY 50 BUT NEVER TO SET POINT .2ND, LOWER OVEN ONLY HAD A THERMOCOUPLE NOT A THERMISTER FOR READ OUT SPECIFICALLY AS THE TOP OVEN DOES.SAYING THIS TO RECAP,TOP OVEN NOT TO TEMP ,BOTTOM MUCH CLOSER TO TEMP. SHOULD I JUST BUY NEW TC/THERMISTERS ,RIGHT FROM OEM TO START WITH ORIGINAL EQUIPMENT JUST AS A START POINT.I REALLY DON KNOW IF ANYONE ELSE HAS ALTERED UNITS.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 106 Answers

You could also check that the fingers are properly fitted in place at the point where thy join oven and the glass window is closed. make sure that all the elements are working well

Posted on Aug 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Two of my Hotpoint EW95 Halogen Double Oven elements have lost temperature control. When switched on they go to full heat and stay there regardless of setting on dial. What is wrong?


change switch if there is no control if talking cook top elements
Infinite switch burner control need model number in full for quote

Nov 18, 2014 | Hotpoint Ovens

1 Answer

I have a Lincoln Impinger Model No. 1301/1346 electric counter top oven that wont heat up at all, what could be the problem


After powering on set the temperature to cooking temperature. since its electric it is less problematic. if there is no alarm then check the probe.

Jul 25, 2014 | Lincoln Impinger Electric Countertop Oven...

1 Answer

Is it normal that a whirlpool oven current varies between 9.7 and 20 amps


The heating elements on any stove vary in resistance as they heat up and cool down. When cold, the elements offer more resistance thus less current flows. As the coil gets hotter, the resistance drops and greater current flow develops. The thermostat cycles the elements on and off to maintain the temperature measured in the oven, thus the cycling of power used.

Jan 10, 2013 | Ovens

1 Answer

My lincoln impinger pizza oven keeps showing LLL on temp reader after reaching its temperature,then the temperature keeps rising until it shuts off.


This error LLL on the display screen is as a result that the temparature controller is faulty or the the temparature probe is kaput

Apr 29, 2011 | Lincoln 1132000U - Impringer II Express...

1 Answer

I got a 1301 208v the fan blows good but it does


If threre is no alarm please make sure that the gas inlet pressure is ok or contact me at maugoro@yahoo.com

Feb 05, 2010 | Lincoln Ovens

1 Answer

I have vulcan Double stack electric ovens 208v 3ph.what size breaker do I need to power each oven


I need to know the Power rating Example 5Kw or the Ampere Ex. 30A . What is the raring of each oven? The Breaker should be greater than the Ampere of your oven let say 120% greater.

Jun 11, 2009 | Vulcan Convection Oven - VC44EC-208-3

1 Answer

What is wrong if the oven is not cooking food evenly?


If it is not a fan assisted oven, then I would say that one of the side elements has gone, u will have to locate and check it,or put the oven for a couple of mins, then check the elements they should both be hot.
Hope this helps.
Plz rate this solution.
Thanks.

Dec 31, 2008 | Moffat E32 Full Size Electric Convection...

1 Answer

Hobart HEC40 208V to a 240V source


The only difference should be the elements. Consider installing a buck-boost transformer. It may be cheaper.

The Hobart part number for the 240 volt element assembly is --
# 342170-00002. Your local Hobart can get you a price.

Mar 08, 2008 | Hobart HEC501-208V Electric Single Oven

Not finding what you are looking for?
Lincoln Conveyor Oven - 1132-000-A Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Ovens Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Lincoln Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...