Question about Audio & Video Receivers

1 Answer

Speakers are not working - Audio & Video Receivers

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Audio & Vide... Master
  • 1,550 Answers

Your audio amplifier ICs are damaged thats the reason you don't got any sound in the speakers.

Posted on Apr 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sherwood S-2730CP receiver speakers cut out, won't come back on


mabey the wattage is low for those particular speakers

Dec 07, 2013 | Audio & Video Receivers

1 Answer

Speakers dont work


It can be from the amplifier, check if it works with other speakers, if it does then your speakers are out for some reason

Nov 09, 2013 | Pioneer Audio & Video Receivers

1 Answer

When i go to put it in zone 2 mode for my speakers ouside the entire system shuts off on me. i dont know why its doing this, can someone tell me if this has hapened before and if there is a way to fix the...


Review the manual to see if it has an automatic safety shut-down. It's possible that your 'speakers outside' have a short or are grounding somehow, and that the system is switching itself off in order to not damage itself.

Alternatively the resistance on the speakers may be too far outside of the per-channel specification for your speakers. Keep in mind that the length, thickness and material of your wires will add resistance in addition to the speakers' own resistance.

Try connecting a different pair of speakers (such as the ones closer to the receiver that normally work) to Zone 2, and see if it works fine. If it does, try bringing the outside speakers inside and use the same cables as for the working speakers. If they then work, you can know that something is wrong with your wiring to the outside speakers, and you will need to get a qualified electrician or audio technician/engineer in to replace the wiring for you.

Mar 20, 2010 | Denon AVR-1507 Receiver

2 Answers

Our two left speakers, front and rear will not


Check the connection on the back of the receiver. Check the balance setting, make sure that it's in the middle. Try another mode like stereo, you should hear left and right front only. Also, if your receiver has an on screen menu, check the dB levels for the front and rear left speakers. Good luck!

Dec 09, 2009 | Audio & Video Receivers

1 Answer

Speakers not working


are their speakers in the rear as well. does your car have a total of 6 speakers? if so, the new deck can only run 4 of them, thats why the middle speakers dont work.

Feb 26, 2009 | Kenwood 1090VR Receiver

1 Answer

Rear speakers don't work


Speaker test confirms whether the speakers actually work but not the sound level you have them set at. Chack volume level of each speaker. This may be a separate button all itself.

Jan 06, 2009 | Audio & Video Receivers

1 Answer

RECEIVER WORKS FINE WITH THE RADIO NOT THE TV.


correctly connected to output on tv ? ie red and white left and white and not yellow (video)??

Dec 08, 2008 | Yamaha HTR-5860 Receiver

1 Answer

I have HP Multimedia Speakers. No sound comes from speakers. computer says Realtek digital output...Realtek high definition audio working.


If your speakers are powered speakers i.e. they plug into a wall outlet\has a red power LED etc...then unplug the input wire from your computer. Turn the volume all the way up on the speakers. This'll sound silly but it works. Lick the tip of your finger and tap the input wire tip with your wet finger. You will hear a "Pop" come from the speakers every time you touch the input wire to the speakers. This tells you the speakers are working and your computer is to blame. Good luck!!

barneyluc

Oct 02, 2008 | Audio & Video Receivers

2 Answers

Problem with pioneer vsx-916 av receiver


Be sure you have proper impedance with both sets connected. Some units have a selector switch in the back of the receiver to set the proper bias. ...accordianman

Jan 21, 2008 | Pioneer VSX-915 Receiver

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...