Question about Intuit QuickBooks Simple Start Edition (283063) for PC

2 Answers

What is error c=44 - Intuit QuickBooks Simple Start Edition (283063) for PC

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Filmmaker:

    Uploaded 5 video answers.

  • Intuit Expert
  • 256 Answers

To recover from this error, do the following:

  1. Verify your data (on theFile->Utilities->Verify Datamenu)
  2. If necessary, rebuild your data (on theFile->Utilities->Rebuild Datamenu)
  3. for more help visit

QuickBooks Tech Support

Posted on Aug 07, 2014

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 808 Answers

QuickBooks attempts to change a damaged transaction or record, you may receive a fatal or unexpected error that contains the value C=44. The C= value in the message indicates the type of error the program has encountered. Typical causes include system lockups and power failures while using QuickBooks. To resolve this issue:

  1. In QuickBooks, select the Window menu and select Close All.
  2. Select the File menu and select Utilities >Verify Data.
  3. If the message "Your data has lost integrity" appears, or the error also occurs while running Verify, select the File menu and select Utilities > Rebuild Data.
  4. When the Rebuild utility has completed, run the Verify utility again to ensure that all problems have been corrected (see step 2).
  5. If the error persists after rebuilding, restore a recent backup that does not generate the error.

Posted on Jul 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is Mitsubishi DLP TV error code 44?


That is an Open(blown)

Check for open F9A06 on the Power PCB

Sep 15, 2015 | Mitsubishi Televison & Video

1 Answer

My precor elliptical keeps giving me error44


Precor Error 44, Un-commanded Lift Motion Probable Cause 1. Intermittent or bad connection in the lift position sensor(potentiometer).
2. Lift position sensor (potentiometer) is bad.
3. Lower PCA is bad.
Corrective Action
  1. Bad or intermittent connection of the lift position sensor (potentiometer) is the most common cause of the error 44. Inspect all wiring and connections related to the lift position sensor (potentiometer). Repair or replace wiring connections as necessary.
  2. Monitor the lift position number displayed while operating the lift in diagnostics mode. If the reading makes large changes or is erratic, the lift position sensor (potentiometer) is likely bad. Replace the lift position sensor (potentiometer) or lift motor if the lift position sensor (potentiometer) is internal to the lift motor.
  3. If the lift moves without any command entered either manually or through a program, replace the lower PCA.
Precor Error Code 44

Jun 26, 2014 | Precor EFX 546i Elliptical Version 4

1 Answer

What am i supposed to do when i'm getting error 44:10


    System Error
    44:10
    Problem Description
    Problem with the Aerosol Fan
    Corrective Action:
    Reboot the Printer. Check the Aerosol fan cable is not damaged, Replace the Aerosol Fan, if error continues, Replace Interconnect PCA

May 13, 2014 | HP Designjet T1100ps Printer

1 Answer

Error 44 time out motor


Could be faulty design.

Apr 17, 2014 | Franke Evolution

1 Answer

Error 44


Precor Error 44, Un-commanded Lift Motion Probable Cause 1. Intermittent or bad connection in the lift position sensor(potentiometer).
2. Lift position sensor (potentiometer) is bad.
3. Lower PCA is bad.
Corrective Action
  1. Bad or intermittent connection of the lift position sensor (potentiometer) is the most common cause of the error 44. Inspect all wiring and connections related to the lift position sensor (potentiometer). Repair or replace wiring connections as necessary.
  2. Monitor the lift position number displayed while operating the lift in diagnostics mode. If the reading makes large changes or is erratic, the lift position sensor (potentiometer) is likely bad. Replace the lift position sensor (potentiometer) or lift motor if the lift position sensor (potentiometer) is internal to the lift motor.
  3. If the lift moves without any command entered either manually or through a program, replace the lower PCA.
Precor Error Code 44

Nov 27, 2013 | Precor Exercise & Fitness

1 Answer

Error 44 precor eliptical 546


Precor Error 44, Un-commanded Lift Motion Probable Cause 1. Intermittent or bad connection in the lift position sensor(potentiometer).
2. Lift position sensor (potentiometer) is bad.
3. Lower PCA is bad.
Corrective Action
  1. Bad or intermittent connection of the lift position sensor (potentiometer) is the most common cause of the error 44. Inspect all wiring and connections related to the lift position sensor (potentiometer). Repair or replace wiring connections as necessary.
  2. Monitor the lift position number displayed while operating the lift in diagnostics mode. If the reading makes large changes or is erratic, the lift position sensor (potentiometer) is likely bad. Replace the lift position sensor (potentiometer) or lift motor if the lift position sensor (potentiometer) is internal to the lift motor.
  3. If the lift moves without any command entered either manually or through a program, replace the lower PCA.
Precor Error Code 44

Nov 22, 2012 | Precor EFX 546i Elliptical Version 4

1 Answer

C956i Precor is displaying Error code 44 ?


Precor Error 44, Un-commanded Lift Motion Probable Cause 1. Intermittent or bad connection in the lift position sensor(potentiometer).
2. Lift position sensor (potentiometer) is bad.
3. Lower PCA is bad.
Corrective Action
  1. Bad or intermittent connection of the lift position sensor (potentiometer) is the most common cause of the error 44. Inspect all wiring and connections related to the lift position sensor (potentiometer). Repair or replace wiring connections as necessary.
  2. Monitor the lift position number displayed while operating the lift in diagnostics mode. If the reading makes large changes or is erratic, the lift position sensor (potentiometer) is likely bad. Replace the lift position sensor (potentiometer) or lift motor if the lift position sensor (potentiometer) is internal to the lift motor.
  3. If the lift moves without any command entered either manually or through a program, replace the lower PCA.
Precor Error Code 44

May 30, 2012 | Precor C956i Treadmills with HR /...

1 Answer

I have a C956 treadmill. I am getting error code 44, can you tell me what that means?


Precor Error 44, Un-commanded Lift Motion Probable Cause 1. Intermittent or bad connection in the lift position sensor(potentiometer).
2. Lift position sensor (potentiometer) is bad.
3. Lower PCA is bad.
Corrective Action
  1. Bad or intermittent connection of the lift position sensor (potentiometer) is the most common cause of the error 44. Inspect all wiring and connections related to the lift position sensor (potentiometer). Repair or replace wiring connections as necessary.
  2. Monitor the lift position number displayed while operating the lift in diagnostics mode. If the reading makes large changes or is erratic, the lift position sensor (potentiometer) is likely bad. Replace the lift position sensor (potentiometer) or lift motor if the lift position sensor (potentiometer) is internal to the lift motor.
  3. If the lift moves without any command entered either manually or through a program, replace the lower PCA.
Precor Error Code 44

Jan 04, 2011 | Precor C956 Treadmill with Cardio Theater...

1 Answer

What does this error mean Line: 44 Char: 8862 Error: Handler already exists Code: 0


What does this error mean Line: 44
Char: 8862
Error: Handler already exists
Code: 0

Dec 07, 2009 | Facebook Social Network

1 Answer

Maya 44 usb problem


you need to make sure that you are actually choosing maya on both cubase and virtual dj and config settings

Oct 30, 2008 | AudioTrak MAYA 44 USB External Sound...

Not finding what you are looking for?

Open Questions:

Intuit QuickBooks Simple Start Edition (283063) for PC Logo

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intuit Computers & Internet Experts

Scott Fair
Scott Fair

Level 2 Expert

237 Answers

Dan Shibata
Dan Shibata

Level 3 Expert

542 Answers

Mike

Level 3 Expert

4340 Answers

Are you an Intuit Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...