Question about KitchenAid KUDR01TJ Dishwasher

1 Answer

TAKES A LONG TIME, - KitchenAid KUDR01TJ Dishwasher

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Takes a long time to what? If the entire cycle seems to take forever, one suggestion is to make sure your hot water heater is turned up. Most dishwashers requires the water to be a minimum of 120 degrees before the timer will begin. If you are using a Sani-Wash cycle, then the water need to heat up to 165 degrees. The heater can only heat the water 1 degree per minute, so if the water coming in to the dishwasher is only 100 degrees, it will take an additional 65 minutes before it will even start the cycle. You can also make sure you get the water at the sink hot before you start the dishwasher, this will ensure the hottest water is going in (only fills for 90 seconds).

Posted on Jul 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 grand prix when cold takes time to go into gear


the fluid is draining back into the pan while the car sits so when it is cold it takes time for the pump to re-prime and build pressure, if you have a flush done it should remedy the problem, it is not uncommon for GMs to do this.

Sep 30, 2012 | 1999 Pontiac Grand Prix

1 Answer

What's a lap?


A lap time refers to the elapsed time it takes to complete a full lap. For example how much time it takes to complete an Olympic swimming pool or a full circuit.

Aug 02, 2012 | Exercise & Fitness

1 Answer

Have a 02 Buick century takes long time to heat up gauge even moves up slow. After a while get really hot but takes long time. Is that still the thermostat?


NO HAVE RADIATOR FLUSH DONE PUT 50/50 ANTI FREEZE IN IT ALSO DEPENDS ON THE WEATHER OUT SIDE IF ITS COLD OUT IT TAKES LONGER FOR YOUR CAR TO HEAT UP

Dec 15, 2010 | 2002 Buick Century

1 Answer

Laptop takes a LONG time to start and takes a long


You have a badly designed program running in the back ground. Finding it will be difficult. Best way is to make a backup of your files and reinstall. After that start installing your programs one by one with reboots in between. When you will reach the problem one you will know - just get rid of it.

Jul 18, 2010 | Dell Inspiron E1505 Notebook

1 Answer

My youtube videos takes more time buffering than playing a 5 min video takes 30mins or more to play


The reason why the youtube videos takes more time in buffering is it gathers the data/video before it loads or run. And it will also vary the speed of the internet connection. Meaning, the low internet connection, the more time in buffering.

Jul 09, 2010 | Computers & Internet

1 Answer

I have a kenmore elite washer and dryer is there any way to speed up the time it takes to do a load of wash it takes mine forever. Can it be reprogrammed or a way to reduce the time it takes for a wash...


No way to change pre programmed main control board, although you can use a gentle/delicate cycle that does have a shorter wash time. I would not use this for very dirty laundry. Good Luck, Appliance Specialists

Jan 06, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

Network login takes lot of time


Your DNS is wrong, Thats why it takes forever to login, its trying to resolve the DNS

Feb 24, 2009 | Acer Aspire One PC Notebook

1 Answer

Printing problem


quality - cartridge,charge roller,
4-5 papers - pickup presure pad, clean / replace.
long time to charge - fixing unit.- thermister.

Oct 22, 2008 | Samsung SCX-4100 All-In-One Laser Printer

Not finding what you are looking for?
KitchenAid KUDR01TJ Dishwasher Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Dishwashers Experts

Mike

Level 3 Expert

4340 Answers

Cindy Wells

Level 3 Expert

5128 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a KitchenAid Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...