UA-787 - Numbers on display are only partially visable

had same problem last week, get a faint display of partial figures for about 10 seconds which then gradually fades to nothing. Backlight is now staying on permanently. for outside and inside units did the "remove batteries for 48 hours" and new batteries of course. did you find a solution?

www.moultriefeeders.com and ask for replacement LCD menu display...$14.99...they send instructions to replace...I get my parts from other defective cams.

A suggestion, it might be time for a battery change

If the display is showing "partial digits" on the display, it means a scale is excessively shaken (sometimes during shipping) it's possible for the LCD to become partially separated from the PCB (Printed Circuit Board). On many models you can gently press on the LCD and it will reconnect. However on many scales it's difficult to reach the LCD (without removing the cover) and thus the scale will often have to be returned to the manufacturer for repair. Contact them at 1-800-326-6247 for the Conair appliance customer service center.

We regularly repair such control units for customers nationwide by mail for $39.95 postpaid in about a week or so with a one-year guarantee.

We have the full service manual at our site, which contains the specific safety & disassembly information you'll need here.

We really need the front door panel assembly (which contains the keypad, display board and connecting cable) as well as the power board to which the cable connects, as shown in the attached photos.


Feel free to contact me directly (and please remind me of your full model number from the tag on the unit) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
[email protected]
http://www.microwavedisplay.com

Try changing the batteries if that doesn't work I would buy a new machine. If you have high blood pressure a lot of health care plans will buy you a monitor. Ask your health plan or doctor for more info.

HI Badri,
It seems display problem of your phone. And yes you have to change it. Visit any nearby technician, C-168 display needs to be solder with skill and special tools too.

Anshell,

Hori. and vertical lines on display are also symptoms of faulty LCD. You have to change it.

motorola no service-net working