Question about Agfa Arcus II Flatbed Scanner

1 Answer

Agfa arcus 2 scanner driver problem

I have agfa arcus 2 scanner but not have driver of it. where i get it

Posted by on

  • 3 more comments 
  • pratmand May 01, 2008

    i have windows xp. From above link I got the fotolook software & arcus 2 icc profile but driver was not detected by system & scanner also not shown by computer.

  • RAOUF RHAIEM May 30, 2008

    i have agfa arcus 2 scanner but not have driver of it.

  • SILVIAbo Jun 17, 2008

    en realidad tengo uns SNAP SCAN 310 - me dijeron que lo instale como ARKUS II, con Windows 2000, funcionó pero no con XP y en con un mother SOYO 7VBA

  • RAOUF RHAIEM May 11, 2010

    P 4

  • Serwen Bagadiong
    Serwen Bagadiong May 11, 2010

    What is the oprating system of your computer?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 441 Answers

Try this link: For Windows (95, 98, ME, NT, 2000, XP only)http://static.agfa.com/digicam_scanner_drivers/scanner/duoscan/index.html

Posted on Apr 29, 2008

2 Suggested Answers

SOURCE: How to change lamp in AGFA Arcus 2 flatbed scanner?

http://www.uktsupport.co.uk/scanner/agfa/arcus.htm#a2lamp

  • Turn off the scanner power switch and disconnect the power plug. Wait at least 15 minutes to allow the unit to cool down.
  • Unscrew the two screws at the back of the base.
  • Pull the SCSI board out enough to disconnect the ribbon cable that threads through the opening in the base (on the right).
  • Remove the two screws from the upper portion of the back of the base.
  • Remove the Transparency Option (TPO) from the base.
  • Remove the two screws from the top back of the base. These screws will be visible when the Transparency option is removed.
  • Remove the two screws from the top front of the base and lift the plastic housing off the scanner.
  • Move the carriage optical assembly backward until you can reach the lamp.
  • Remove the two screws from the top of the optical assembly that covers the bulb and remove the black cover.
  • Lift the lamp from the socket, working one end, then the other.
  • Replace the lamp with a replacement lamp. One replacement lamp is provided with the scanner and others are available through Agfa Parts Order.
  • Return the lamp cover the original position and replace the two screws.
  • Replace the plastic housing and replace the four screws holding the housing.
  • Thread the ribbon cable of the Transparency Option through the base and plug back into the SCSI board.
  • Return the board to the base and tighten the two screws. This insures a slack cable that won't be punctured when screws are put in to attach the transparency module to the base unit.
  • Replace the two screws in the back of the base to secure the Transparency Option to the base.
  • Posted on Feb 24, 2008

    • 310 Answers

    SOURCE: RE: Agfa Arcus II Scanner

    Restore the system.

    Go to Start->All programs->Accessories->System restore

    Posted on Mar 03, 2008

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    I'm surching installation software for agfa duoscan


    Agfa discontinued its consumer scanner product line (SnapScan, DuoScan, Arcus), as well as its digital camera product line (ePhoto, StudioCam) in September 2001. Therefore, we are no longer able to provide any support. Agfa does not keep digital cameras or scanners, nor spare parts for these products, in its stock. A number of companies (such as VueScan) offer drivers that should allow older scanners to work with recent operating systems.

    The solution is to buy a new scanner.

    Good luck

    Feb 03, 2013 | Agfa DuoScan HiD Flatbed Scanner

    3 Answers

    AGFA ARCUS II


    unplug it all will have to remove driver then download latest driver form website ok and maby cheak usp port

    Jan 30, 2008 | Agfa Arcus II Flatbed Scanner

    1 Answer

    I am having "AGFA ARCUS 1200" Scanner, and want


    Hi!

    You can use Hamric (VUSCAN) software with new SCSI card. This scanner will work in Windows 7 32 Bit.

    I have used it.
    Lalit Chawla
    New Delhi (INDIA)
    lalitc@hotmail.com

    May 01, 2011 | Agfa Arcus 1200 Flatbed Scanner

    1 Answer

    I need the power and connection wire specifications for arcusII agfa scanner.


    My Arcus II is 20 years old. I don't know when Agfa stopped servicing their scanners. Mine uses scsi connections and it's connected to Mac G5 OS 9. My driver is Fotosnap. I have the original book and loose leaf.

    Feb 10, 2011 | Agfa Arcus II Flatbed Scanner

    2 Answers

    Is snapscan touch compatable with vista?


    This is from AGFA website.
    They do not support vista.
    Support scanners and digital cameras and digital cameras Agfa discontinued its DTP scanner product line Agfa discontinued its DTP scanner product line (SnapScan, DuoScan, Horizon and Arcus range) and digital cameras (ePhoto, ActionCam, StudioCam) at the end of 2001.
    Driver & software downloads as well as manuals for Windows (95, 98, ME, NT, 2000, XP not for every model!) and Mac platforms MAC (Classic, Classic, OS X not for every model!) remain available on this webpage. Agfa does not provide any further support.

    Mar 25, 2009 | Agfa SnapScan Touch Flatbed Scanner

    1 Answer

    Scanner agfa


    el driver esta en esta pagina:
    http://static.agfa.com/digicam_scanner_drivers/scanner/duoscan/index.html

    Jun 09, 2008 | Agfa Arcus 1200 Flatbed Scanner

    1 Answer

    RE: Agfa Arcus II Scanner


    Restore the system.

    Go to Start->All programs->Accessories->System restore

    Mar 03, 2008 | Agfa Arcus II Flatbed Scanner

    1 Answer

    How to change lamp in AGFA Arcus 2 flatbed scanner?


    http://www.uktsupport.co.uk/scanner/agfa/arcus.htm#a2lamp

  • Turn off the scanner power switch and disconnect the power plug. Wait at least 15 minutes to allow the unit to cool down.
  • Unscrew the two screws at the back of the base.
  • Pull the SCSI board out enough to disconnect the ribbon cable that threads through the opening in the base (on the right).
  • Remove the two screws from the upper portion of the back of the base.
  • Remove the Transparency Option (TPO) from the base.
  • Remove the two screws from the top back of the base. These screws will be visible when the Transparency option is removed.
  • Remove the two screws from the top front of the base and lift the plastic housing off the scanner.
  • Move the carriage optical assembly backward until you can reach the lamp.
  • Remove the two screws from the top of the optical assembly that covers the bulb and remove the black cover.
  • Lift the lamp from the socket, working one end, then the other.
  • Replace the lamp with a replacement lamp. One replacement lamp is provided with the scanner and others are available through Agfa Parts Order.
  • Return the lamp cover the original position and replace the two screws.
  • Replace the plastic housing and replace the four screws holding the housing.
  • Thread the ribbon cable of the Transparency Option through the base and plug back into the SCSI board.
  • Return the board to the base and tighten the two screws. This insures a slack cable that won't be punctured when screws are put in to attach the transparency module to the base unit.
  • Replace the two screws in the back of the base to secure the Transparency Option to the base.
  • Nov 16, 2007 | Agfa Arcus II Flatbed Scanner

    Not finding what you are looking for?
    Agfa Arcus II Flatbed Scanner Logo

    Related Topics:

    678 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Agfa Scanners Experts

    Starnley Johnwells
    Starnley Johnwells

    Level 3 Expert

    1029 Answers

    Cindy Wells

    Level 3 Expert

    4753 Answers

    yadayada
    yadayada

    Level 3 Expert

    60691 Answers

    Are you an Agfa Scanner Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...