Question about Hitachi CLU-5713TSI Remote Control

1 Answer

I need the code to program my hitachi remote control to a SDV290 Toshiba Dvd player?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,932 Answers

Hi,


1.Turn on the component to be programmed, such as the television or DVD player.

2.Press the "Code Set" button on your Hitachi remote. The button is often located near the top with the separate component buttons.

3.Press the button for the component you wish to program with the Hitachi Remote(TV,DVD).

4.Enter the manufacturer's code for the component being programmed. The manufacturer's code can be found either in the Hitachi manual, the manual for the component being programmed or on the website of the manufacturer of the product.

5.Press the "Enter" button to submit the manufacturer's code.

6.Press the power button for the component being programmed. Make sure the remote is pointed at the correct component, and it should turn on if the program was entered correctly

Thanx

Posted on Jul 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hitachi remote CLU 3851WL. What is the code for DVW-7200 DVD/VCR?


I doubt that your Hitachi remote is a universal type that would allow you to search for a code. You may have to substitute a universal remote and program it to control both your Hitachi TV and your Sanyo DVD/VCR.

Jul 28, 2015 | Sanyo DVW-7200 DVD/VCR

1 Answer

How do I program the Toshiba CT-90325 remote to control the Toshiba SD-V280 VCR/DVD player?


If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes used for devices too are given, in the order of device brand name list in alphabetical order. Do a search by type in the brand name of your device, at its search box, and press "Enter". Or, pull up older posts.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Jul 23, 2014 | Toshiba Original CT-90325 TV Remote...

1 Answer

I can't program it to my dvd player


here are the codes I found.

DVD PLAYER
Aiwa: 006, 015
Apex: 016, 017
BOSE: 097
Broksonic: 018
Clarion: 019
Classic: 020
Daewoo: 021
Denon: 022, 023, 024, 025
Emerson: 026, 027
Fisher: 028
Funai: 027
GE: 001, 029, 030
Go Video: 087
GPX: 031
Hitachi: 005, 032, 033,
034, 035
JVC: 003, 007, 036, 042,
088
Kenwood: 037
Konka: 008, 009
Magnavox: 004, 038
Memorex: 039
Mintek: 040
NAD: 026
Nakamichi: 041
Norcent: 043
Onkyo: 044
Oritron: 058
Panasonic: 010, 045, 046,
047, 048, 049, 050
Philips: 004, 051
Pioneer: 052, 053, 054,
055
Proscan: 001, 056
Qwestar: 057, 058
RCA: 001, 002, 059, 089
Sampo: 060
Samsung: 061, 062, 086,
090
Sansui: 073
Sanyo: 063, 091
Sharp: 064, 067
Sherwood: 074
Sony: 011, 012, 065, 066,
068, 069, 070
Sylvania: 027
Teac: 071
Technics: 072
Techwood: 075
Toshiba: 000, 013, 076,
077, 078
Yamaha: 079, 080, 081
Zenith: 014, 082, 092

Jan 07, 2013 | Toshiba CT-852 Remote Control

1 Answer

How do i program my hitachio clu 4362s for dvd player


If you do not have the manual for the remote the codes needed for the DVD player must be present on the list.
Please check if the following codes will help:

http://www.xdiv.com/remotes/

http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

Oct 15, 2011 | Hitachi CLU-4324UG Remote Control

1 Answer

I need a code for a toshiba 22lu505


Do you mean the Toshiba 22lv505 TV/DVD combo? Unfortunately, the URC-3021 remote was released in 2004 and the TV in 2005. The code you need may not be in the remote. (Codes usually are only available for devices released at least 6 months before the remote was programmed.) You probably need a newer remote.

The code list is available here: http://www.oneforall-na.com/remote.php?type=URC%203021 . Look at the bottom right of the page. The code given for a Toshiba DVD player is 0503. The codes for Toshiba TVs are 0154, 0156, 0060, 1356, 1656, 1704, 0650. The only TV/DVD player that this remote has a code for is by Sylvania.

I wish that I had better news for you.

Cindy Wells

Jun 22, 2011 | One For All URC-3021 Remote Control

2 Answers

I have a universal remote and need the code for a magnavox dvd player to program the dvd player thank you



Hi,
To get the code please go to below website

http://remotefinder.rca.com/default.aspx?site=rca

Please
Provide model of your remote
device to be programmed (VCR,TV)
Make name(toshiba,sony)

Thanx

Jul 28, 2010 | RCA RCU404 Remote Control

1 Answer

Need the code for one for all universal remote to


The code for a URC-3021 to control a Toshiba DVD player is 0503.

To setup your URC-3021 for the DVD player, these are the steps:

1. Turn on your DVD.
2. On the remote control, press DVD once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Enter the first four-digit code for your device. If performed correctly,
the LED will blink twice. If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again.
5. Aim the remote control at the device and press POWER once. The device should turn off.

Hope that helps.

Oct 25, 2009 | One For All URC-3021 Remote Control

1 Answer

I need to know how to program my CLU-5729TSI to run my Philips DVD player DVP1013


I have Hitachi universal remote CLU - 5729TSI how can I Program it to change the code for a different tv. a toshiba 36 inch it is around a 1999-2000 model.

Sep 27, 2009 | Hitachi CLU-5713TSI Remote Control

4 Answers

URC-3021B00


PROGRAMMING DEVICE CONTROL
The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box.To control devices other than the default brands,perform the following
steps; otherwise skip this section:
1. Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2. On the remote control,press a device key once (i.e., DVD/VCR,
CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the Manufacturer’s Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
5. Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn’t work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
6. Repeat steps 1 through 5 for each device you want to control.
For future reference,write down each working device

Here is a link to your manual:
http://www.ofausa.com/remote_manual/CTGA...

Nov 26, 2007 | One For All URC-3021 Remote Control

2 Answers

Program codes


hitachi colour plasma television model name P50T01U is show remote lock .how i unlock the lock menu.

Oct 15, 2007 | Hitachi CLU-5713TSI Remote Control

Not finding what you are looking for?
Hitachi CLU-5713TSI Remote Control Logo

453 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74251 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...