Question about AudioCodes MediaPack MP-114 FXS

1 Answer

I would like to connect an audiocodes mp 114 fxs to an Avaya Communications manager. The problem is Call sets up but no audio is heard. I also can not get the gateway to register with the avaya aura Ses server. I have Quintums as400 working fine with out the need to program ops stations- the audiocodes config sheets call for ops stations. I have followed some online modules but can not get the audio to work plus it would be good to have it work without ops on the avaya aura.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 20 Answers

Are you able to get a Wireshark trace from a mirror port of incoming/outgoing traffic for that MP? that way SIP session and RTP (audio) session can be analyzed and issue pinpointed. If no audio is arriving into MP no audio is expected to go out, if audio IS being delivered from the MP to the network, MP is doing its job. If audio IS getting into MP from network but no audio goes out further debug should be made, also if no audio is being delivered from MP to the network.

Posted on Nov 25, 2013

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76070 Answers

SOURCE: Hi, Here's my issue: a) I have

maybe the signal is to weak for lock on.

Posted on Jul 22, 2009

SOURCE: way to reset mp-114 audio code to factory settings and configure

Unplug the network cable and hold in the RESET button (small hole on back of unit) with a paperclip for 6 - 10 seconds. The default IP is 10.1.10.10 sm 255.255.0.0 if it is an FXS
10.1.10.11 sm 255.255.0.0 if it is an FXO

Posted on Jun 07, 2010

DJ Skywalker
  • 507 Answers

SOURCE: I reset my Audiocodes MP202

Look on the bottom of your router.
It will show you the login information.


I've you can't find it or it doesnt work

Make sure you do a factory reset.

Still not working ?

Contact your ISP.

Posted on Jun 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The LED Uplink do not work when i connect lan cable. Therefore i cant acces interface


Attempted to do a firmware upgrade previous to failure? that can cause a bricked MP. Use wireshark to see if there is any sign of life when connecting ethernet cable to the interface, if there is life on earth you may still have a chance to recover it.

May 27, 2011 | AudioCodes MediaPack MP-114 FXS

1 Answer

How configure proxy on mp114 fxs


Download your INI config file and search for ISPROXYUSED under [SIP Params] block, if is not there add the line as follows:
ISPROXYUSED = 1
Then search for ProxyIp 0 under [ProxyIp] block and if there is no line add it as follows:
ProxyIp 0 = your.proxy.ip.address, -1, 0;

This will set a unique proxy IP address for all the SIP outgoing traffic of your MP, if you wish to use more than one SIP Proxy you may want to consider setting IP address on Routing menu.

Feb 15, 2011 | AudioCodes MediaPack MP-114 FXS

1 Answer

Need to reset to factory settings due to assigned IP address is no longer working


Unplug the network cable and hold in the RESET button (small hole on back of unit) with a paperclip for 6 - 10 seconds. The default IP is 10.1.10.10.

Feb 16, 2010 | AudioCodes MediaPack MP-114 FXS

1 Answer

How can i configure audio code?


In the fast track guide there will be IP's listed. find the one for the device you are configuring, set you computer or laptop to an IP that is in the same range and connect via your broswer by IP.

Example:

Audio Codes IP and mask: 10.1.10.10 255.255.0.0
Set your pc IP to: 10.1.10.11 255.255.0.0

In the address bar of your browser type in 10.1.10.10. You should get a window asking for user name and password.

Nov 25, 2009 | AudioCodes MediaPack MP-114 FXS

1 Answer

My mp-114 dials 5252 when I access a line. Do you


You may have enabled the "auto dialing" feature and may have that destination configured. Please post your INI config file and I will be able to assist you further.

Aug 07, 2009 | AudioCodes MediaPack MP-114 FXS and FXO...

1 Answer

Way to reset mp-114 audio code to factory settings and configure


Unplug the network cable and hold in the RESET button (small hole on back of unit) with a paperclip for 6 - 10 seconds. The default IP is 10.1.10.10 sm 255.255.0.0 if it is an FXS
10.1.10.11 sm 255.255.0.0 if it is an FXO

May 16, 2009 | AudioCodes MediaPack MP-114 FXS

Not finding what you are looking for?
AudioCodes MediaPack MP-114 FXS  Logo

Related Topics:

373 people viewed this question

Ask a Question

Usually answered in minutes!

Top AudioCodes Computers & Internet Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

The Knight
The Knight

Level 3 Expert

74185 Answers

Are you an AudioCodes Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...