Question about Rado Original Hard Metal Silver Dial Automatic R12637113 Watch for Men
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Rado Diastar
your problem is in setting lever,when the setting lever is jumping the stem cannot get back and lock,you better unscrew the complete barrel drum bridge plate take it out ,and the winding pinion is expose,take the winding gear and the setting lever is expose then arrange the alignment,align the winding pinion to the setting lever,alignment is ok.back bridge plate and screw,,make some winding of the crown,let see rachet wheel can turn transmission wheel of complete barrel drum,if can then checked the stem if already lock.,if lock already the job is done,...email if you some question regarding a watch ;firstname.lastname@example.org
Posted on Jun 21, 2008
SOURCE: I have a Rado DiaStar
Hears how i do my watch, i have the same watch as you.Just make sure nothing is displayed on the clock face by turning the winder, ie NO digital time, NO daul time, NO alarm, NO stop watch etc, Pull out the winder(crown) and adjust the hands to the time you require by spinning the winder.(Gentley for mins and fast for hours) The digital clock will display wilst doing this, but not change the time.handy if you want to sync both clocks.Push the winder back in at the time to sync and the digital display will go out, then spin the winder again if you want to display the digital features. I hope this helps, please post if it does, Maurice Chevalier- Herts
Posted on Nov 27, 2008
SOURCE: rado diastar swiss 196-0364-3
I bought the same watch recently and have the same problem. The hours can be adjusted in the dual time zone by looking up the manual, but the minutes stay put. I can't bring them to blink so that these could be adjusted. Any ideas? I sent a mail to Rado through their website but no answer.
Posted on Dec 06, 2009
That links are most likely ceramic! Take your watch to a reputable watch repair shop...they break very EASY! Make sure they know what they are doing!!!!
Posted on Jan 16, 2010
Tips for a great answer:
May 14, 2015 | Rado Watches
Jan 22, 2015 | Rado Watches
Jan 21, 2013 | Watches
Jul 07, 2011 | Watches
Jun 09, 2011 | Rado DiaStar watch #R20282192 Watch for...
Mar 01, 2011 | Rado Diastar Classic 300M R12639023 Watch...
Feb 23, 2011 | Rado Diastar Anatom Jubile watch
Jun 21, 2010 | Rado Diastar Anatom Jubile watch
Feb 03, 2010 | Rado Integral White R20488732 Wrist Watch
Oct 20, 2009 | Rado Coupole R22531723 Watch
84 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: