Question about Troy Bilt 5.5hp Self Propelled Mower

1 Answer

I have a troybilt xp, and the self propel fontion

I have a troybilt xp, and the self propel fungtion does not ingage at all. i just replaced the transmission and that did not help at all.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 755 Answers

Does the drive shaft going to the wheels turn at all?

If it doesnt you may have a unsecured pulley on the engine.

If the shaft does turn when you engage the tranny your next stop is taking the wheels off and checking the wheel clutches. Sometimes called sprag clutches. They are probably both stuck in the unlocked position. You need to clean them up by removing all the greasy material covering them and putting them back together with just a few drops of light oil.

I hope this helps. Good luck and be careful!

Posted on Jul 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace a drive cable on a troy bilt push mower model 12av834q711


I am assuming you want to replace the drive cable on this mover.
You can view this in detail in this video

https://www.youtube.com/watch?v=PbwO2ygfS0k

If you need the manual you can download from this site
Manual Troybilt Rotary mower 12AV834Q711

If not then please send a comment clarifying which cable you are referring to.
Parts can be purchased from this site
http://www.searspartsdirect.com/partsdirect/part-model/Troybilt-Parts/Walk-behind-lawn-mower-Parts/Model-12AV834Q711/1307/1500600/P0601106/00002

Aug 12, 2014 | Troy Bilt 5.5hp Self Propelled Mower

1 Answer

Troybilt self propelled mower front wheels lock up when pulling back


most have small leaf springs that let it toggle back and forward, if they brake can cause this problem. Then it may just need the wheels removed, clean the parts and lubed

May 31, 2014 | Troy Bilt 5.5hp Self Propelled Mower

1 Answer

Husband says thinks it is starter cable has stretched and needs new one...does this sound correct and how to install it on Troybilt self-propelled push mower?


I'd love to help you, but I think you need to rephrase your question. There is no "Starter Cable" on this mower. Sorry.
James

May 22, 2011 | Troy Bilt 5.5hp Self Propelled Mower

1 Answer

I need a owners manuel for a troybilt lawn mower


For Troy-Built USA, use this link and submit your model number and serial number to find and download your manual:

http://manuals.mtdproducts.com/mtd/Public.do?BrandCode=10001

For Troy-Built Canada, use this link and submit your model and serial number to find and download your manual:

http://www.troybilt.ca/troybilt/troybilt_manual_search.asp

All other countries use this page and find the applicable website or email address then go to the applicable website or email the contact point:
http://www.troybilt.ca/troybilt/contact-world.asp

Thanks for choosing FixYa,
Kelly




Oct 04, 2010 | Troy Bilt 5.5hp Self Propelled Mower

1 Answer

My Troybilt starts, idles, then stops. What is


1st thing to try is clean and rebuild carb(easy job) ...good luck

Apr 07, 2010 | Troy Bilt 5.5hp Self Propelled Mower

1 Answer

My self propelled high wheel mower doesn't go


If this is a TroyBilt 34068, check your belt to make sure it is still on the transmission pulley. If the belt is in place, start it up, engage the transmission and observe both axle ends where they protrude from the center of the wheels, if one of them is turning, you have somehow lost the square key that locks the wheel to the axle. Replace the key and you will be good to go

Sep 15, 2009 | Garden

1 Answer

Manual for 6hp Troy Bilt self propelled lawn mower


Go to www.troybilt.com and on the top of the home page click on FAQ (frequently asked questions) and on that page click on "owners manuals". You will need your model number of the mower. I hope this helps!

Sep 08, 2009 | Troy Garden

1 Answer

Troy Bilt 33'' Replaced the self propel v belt and now the mower will not disengage from drive mode, also very hard to shift gears


If you didn't by the Troybilt belt, try that. I had the same problem with a Napa belt. Going into drive as soon as I grabbed the operator presence button, not coming out of gear etc. When I switched the the Troybilt belt, the problem went away.

Jul 17, 2009 | Troy Garden

1 Answer

Need help with belt on Troybilt self propelled push mower


Try removing the pulley in order to put the belt back on.

Jim

May 29, 2009 | Troy Garden

Not finding what you are looking for?
Troy Bilt 5.5hp Self Propelled Mower Logo

403 people viewed this question

Ask a Question

Usually answered in minutes!

Top Troy Garden Experts

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Wade Mobley
Wade Mobley

Level 3 Expert

462 Answers

Mike Squire

Level 2 Expert

402 Answers

Are you a Troy Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...