Irql error code 0x0000000a - Gateway 200 ARC Notebook

You have lost a driver for the program mfewpak.sys or the system driver that is part of this program try this link.

https://www.google.ca/url?sa=t&source=web&rct=j&url=http://www.solvusoft.com/en/files/bsod-blue-screen-error/sys/windows/mcafee-inc/mcafee-total-protection-2011/mfewfpk-sys/&ved=0ahUKEwiBgqPzi8DLAhWMuoMKHbcsC2sQFggdMAE&usg=AFQjCNFDrzTvr_H6PXB1ScO_YdgbbdJVqA&sig2=r1WFj1-LX6CmVymdP3Pbyg

Try this microsoft support document:
http://support.microsoft.com/default.aspx?scid=kb;en-us;314063

Stop error 0x0000000A (Stop 0x0A) shows that there was an attempt in kernel mode to touch pageable memory at too high a process internal request level (IRQL). This error usually occurs when a driver uses an incorrect memory address. Other possible causes of this error are an incompatible device driver, a general hardware problem, and incompatible software.


Basically a software or hardware incompatibility.
It offers some solutions that you may want to try

If you need further help, I’m available over the phone at https://www.6ya.com/expert/michael_e0539de310ea5ad7

http://support.microsoft.com/kb/310918

same error after running this fix. It does list my printer in "searching for available printers", but when I choose the printer & click next, I still get "cannot connect to printer" & details shows "operation failed with error 0x0000000a."s

CBR Tech Solutions or http://www.cbrtechsolutions.com

IRQL errors are generally software/driver induced.
1st see if you can boot to the safe mode (F8 at boot) and get into windows.
If you can try a system restore to before the issue started.
If you can't get into windows, try Fn + power and run diagnostics on the system, you may have a bad hard drive.

Guest

This stop code, "0x0000000A irql_not_less_or_equal" normally refers to a driver problem. So this is one of the few times where the files that the BSOD lists actually is important. Next I would try to boot the computer into safemode and reinstall/drivers related to that file to see if this make a difference.

Let me know if you have any more problems or questions

Issken
http://www.fixya.com/users/issken

Guest

If you are getting the "irql_not_less_or_equal" BSOD after the install of the drivers then if is possible that you did not get a clean install of the drivers and/or there is something wrong with the device. To let me better see what is going on I need the stop code. The link below will help you get that info from the BSOD.

http://www.fixya.com/support/r4443711-blue_screen_death_bsod_important_info

Note Window XP 64bit was a transition operating system to help manufactures to write 64bit drivers and software for the 64bit operating systems. However there is alot of products out there that eventhough they have Windows 7/Vista 64bit support they do not have XP 64bit support.

Issken
http://www.fixya.com/users/issken

Vist this page.
you can diagnose the error with STOP: 0x0000000A error.
Go to http://www.make-pc-faster.com/ and visit Blue Screen column.

Hi,
The blue background with the error message is called the blue screen of death (BSOD). Normally it means bad ram or hard drive, but here is a link for more info. Hope it helps.....Hank

http://support.microsoft.com/?kbid=314063

First let's try to "flash" the BIOS to correct the erroneous data crashes. Here's the link for the motherboard:

http://www.asrock.com/mb/overview.asp?Model=P4VM8

After flashing go back to the BIOS and setup the appropriate settings, after that reboot and try to load Windows. If this fails then possibly you may have faulty memory modules or they are not seated correctly in the motherboard, try swapping them, hopefully they are the same. I hope this helps.