Question about Measuring Tools & Sensors

Open Question

My corghi em8040 computer wheel balancer is giving error 29.

I had balanced two tire and put another on the balancer and pushed the start button it make a noise and then got the error 29.

Posted by on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 19396 Answers

SOURCE: Getting error code 29 on


Error 29 is device spinning malfunction. Either motor or motor speed sensor malfunction or other mechanical problem causing spinning malfunction. Advice is to call the service number listed in Corghi documentation, this usually is no minor fault.

Here manuals for several models:



EM 6040

5 EM43(Sp.)

Posted on Aug 30, 2010

  • 2 Answers

SOURCE: i need a instruction/user manual for a CORGHI EM73

Posted on Sep 10, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What's your question?wheel balancer CORGHI EM 73 breaking fuse1 after replacement.solution.

if this a power in fuse to electric motor in the balancer then It may be a start/ run capacitor for the electric motor that has failed
have it checked and tested by an accredited electrician

Aug 28, 2015 | Cars & Trucks

2 Answers

I have a 99 expedition I had the tires changed I put smaller tires on it to get rid of the mud tires now my front end shakes like it has 2 flats

more than likely there is some component damage ,linkages, tire rod ends, vibration dampener the shock looking thing under front end , connecting left to right on steering link.

Feb 22, 2015 | 1999 Ford Expedition

2 Answers

99 4runner extremely bad vibrations when braking on dry road going downhill. On flat also, but not as bad.

Have you had your wheel bearings checked ? You can check them yourself if you put the wheel and tire off the ground and try to press each side of the wheel in opposite directions and the same on the top and bottom. do this with strength and try to do it fast. If it seems to have slack in it then it is probably your wheel bearing. Your tire alignment could also be out. Have you hit a curb hard or anything? The tire and wheel could also be out of balance. Try having them computer balanced at a tire shop. Sometimes tires with several miles on them will start to wobble. Sometimes the tire weights that are used to balance a tire actually come off and the tire will then be out of balance.

May 16, 2012 | 1999 Toyota 4Runner

2 Answers

Vibration in front end axles look good tried new tires still there

If you jack up 1 wheel off the ground and put the car in gear , you can watch the tire spin. You might see a bent rim. The shop that mounted the tires should have seen it and warned you though.

Feb 11, 2011 | 1996 Oldsmobile Cutlass Ciera

6 Answers

My jeep wrangler shakes at 55 mph

lol Make sure you wash the inside of your rims after you go playing in the mud. a small amount of dried mud will make your wheel shake at a high speed. It will unbalance your wheel.

Mar 19, 2010 | 2006 Jeep Wrangler

4 Answers

Hi. i have changed my tires now when i drive i get this vibration all over

They ALL Must be Checked for Debris Behind the RIM < or Between Rim & HUM this is a Common Misshap upon Switching Wheels Also Be SURE they ALL are SET BACK against there Hubs.

Sep 27, 2009 | 2004 Audi A4

1 Answer

Steering wheel & inside vibration issues

Yes...That's probably a 50 or 55 series tire which by the nature of it's short sidewall will give you a "stiff" ride as compared to a more typical 70 series. Verify that the vibration does not come only when you are braking or accelerating. If you vibrate only when cruising then 95%(unofficial stat) of the time it comes from the tire/wheel/balance assembly.

Aug 08, 2008 | 2008 Chevrolet Suburban

Not finding what you are looking for?
Measuring Tools & Sensors Logo

Related Topics:

559 people viewed this question

Ask a Question

Usually answered in minutes!

Top Measuring Tools & Sensors Experts

Vuk B

Level 3 Expert

678 Answers

Brad Brown

Level 3 Expert

15639 Answers

Tom Chichester

Level 3 Expert

34760 Answers

Are you a Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides