Question about PC Desktops

2 Answers

Need jumper settings for Maxtor 83500D4 hard drive.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 667 Answers

Here are your Jumper settings. If this solves your problem please rate this as fixed. If you need further help just add a comment and I'll be glad to help you out. Thanks.Need jumper settings for Maxtor - 991329a.gif

Posted on Apr 26, 2008

  • Jeffrey Pemberton
    Jeffrey Pemberton Apr 26, 2008

    Posted settings for wrong drive. Sorry. Here are yours:

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 176 Answers

What do you want to know how to change the setting from master to slave. You can see that in the body of the harddisk in the upper center of the jumper of the hardisk

Posted on Apr 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What settings in the bios with maxtor as slve and quantom fireball as master


There are no settings in the BIOS for setting up master ans slave drives.
The hard drives have jumpers for configuring master and Slave drives.
If your hard drives are IDE/PATA hard drives and you intend to install these drives on the same IDE cable then you can set the jumper on Quantum drive as Master and the Maxtor on Slave.
I suggest that you install the Quantum as master on the 1st IDE cable and the Maxtor as Master on the 2nd IDE cable for maximum data transfer rate between the two hard drived.
Any other devices that are connected to these IDE cables will need to be jumpered as Slave devices.

Mar 28, 2012 | Gateway PC Desktops

1 Answer

I have a maxtor hard drive D740X-6L wut is the jumper set for slave


For slave u dnt need any jumper remove hard drive jumper and use reginout for ur registry error

Sep 01, 2010 | PC Desktops

1 Answer

Have maxtor 40gb hd want to add 2nd WD hd in DEll dim8200


(if both drives on the same cable):
Your boot drive goes at the end of the primary data cable.
Your second drive goes on the middle connection of the same cable.
The red stripe on the data cable needs to be closest to the power connection (red stripe to pin 1).
The jumper on the boot drive set to master.
The jumper on the second drive set to slave.
Look in the BIOS to make sure it sees both harddrives.
Boot the system.. it will need to be partitioned and formatted if not already..
Regards..

Apr 04, 2009 | Dell Dimension PC Desktop

2 Answers

Dell Dimension 2400 - Adding second HD


set the jumper on the maxtor to cable select and see if that fix's things ?

Nov 29, 2008 | Dell Dimension 2400 PC Desktop

1 Answer

Need installation instructions for Maxtor 80 GB 7200 RPM Ultra ATA/133 8 MB Cache Hard drive for compaq presario sr1630nx microsoft xp


GET SUPPORT AT HP.COM FOR INSTALLING A HARD DRIVE FOR YOUR COMPUTER MODEL.GO TO MAXTOR TO GET SUPPORT FOR INSTALLING THE HARDDRIVE MODEL YOU HAVE.JUMPER SETTINGS,ETC.

Aug 22, 2008 | PC Desktops

1 Answer

How do I change jumper settings on Maxtor hard drive, model: 51024h2, hda: 02a, pcba: 61a?


Hello,

Here's the manual for your drive.

http://www.seagate.com/staticfiles/maxtor/en_us/documentation/manuals/dm_plus_40_ultra_ata_100_manual.pdf

I think the section you need is 2-5. You will need to disconnect the drive from power and the ribbon cable. Use gentle pressure to remove the cables.

If you aren't able to remove the jumpers by hand, I would suggest using tweezers or something similar.

Thanks

Jul 22, 2008 | PC Desktops

1 Answer

Need jumper settings for a Maxtor model 94098u8 hard drive


Here are your jumper settings.If this solves your problem please rate as fixed. If tou need more help just add a comment and I'll be glad to help you further. Thanks.
27f1b9e.gif

Apr 25, 2008 | PC Desktops

1 Answer

Maxtor harddrive jumper setting


If you only have a single hard drive (or multiple hard drives for that matter), you should leave the jumper setting as "Cable Select" or CS.

See if this PDF matches your hard drive:
http://www.seagate.com/staticfiles/maxtor/en_us/documentation/quick_specs/dm10_ata_quickspecs.pdf

Apr 22, 2008 | Compaq Presario SR1800NX Desktop PC

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

385 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...