Question about Canon imageRUNNER 5000 Copier
The error E069-000 is usually due to High Voltage DC card. However, it’s not always due to this. Please check the transfer and separator assembly. Also, check the connections on the back of the fuser unit. Inspect for any loose corona wire connections, there would be two insulator metal plates that if wears out will not allow transfer due to charge between crown wire and these insulator plates. Please note that resistance of this crown wire should be around 10K ohms, check it with a multimeter to be sure. Lastly, Check for the fuse at corona end you may need to replace it to resolve the issue.
Please post back for any further assistance. If you are satisfied please do accept the solution.
Posted on Jul 28, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 28, 2011 | Office Equipment & Supplies
Nov 22, 2008 | Canon IMAGERUNNER 9070 Copier
May 07, 2008 | Canon imageRUNNER C3220 Color Copier
Feb 25, 2008 | Canon (6981A002AA) for imagerunner 2200,...
453 people viewed this question
Usually answered in minutes!