Question about Konica Minolta bizhub C250 All-In-One Laser Printer

1 Answer

My konica Minolta Bizhub c250 is printing an image that is faded in sections and reprints very subtly in other sections where it should be white space. Can you help me fix this problem?

Posted by on

  • matt900 Jul 29, 2010

    Thanks for your help. I think I figured it out. Looks like someone pushed the two green flipper tabs (inside the right door) down for some reason. I pushed them back up so they are loose and the image looks a lot better.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

It could be either your image transfer belt that needs replacing, or your fuser unit. Check the transfer belt first, that's the most common cause for "ghost images"

Posted on Jul 29, 2010

  • service1960 Mar 21, 2011

    technicalor,
    What would cause the print on the page to be so light you can read it? Is that the drum, the transfer belt or the fuser unit? and how can I tell?

  • technicalcor Mar 22, 2011

    Most common cause for light copies is probably toner or dust on the laser unit glass, but it could also be a problem with your toner supply to the developer unit. Take out the developer units ( underneath the toner cartridges) and make sure they turn easily when you turn the gears and check the magnetic roller on the developer unit if there is enough toner on it.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Konica Minolta BizHub C252 - pale colors on the long side


Konica Minolta BizHub C252 Repair Questions,... - Fixya

www.fixya.com > Forum > Printers & Copiers > Konica Minolta
Konica Minolta BizHub C252 - pale colors on the long side · Konica Minolta. ... I have a Konica C250 machine which cannot print red color at all. I had changed ...

Konica Questions answered here ' FixYourOwnPrinter

www.fixyourownprinter.com/posts/40820
Aug 22, 2008 - On the right hand side of the drum (the part that has the large green handle) that easily slides out. There is a ..... I have konica minolta bizhub c252 colour printer. ... The K light came on a long time ago and is constant on now.

How to clean the drums/i units on the konica minolta number ...

? 0:28
https://www.youtube.com/watch?v=eD8HdNq0MlE
Nov 23, 2011 - Uploaded by Tennants Nottingham
How to clean the drums/i units on the konica minolta number plate printer ... Fix or repair color laser printer with fading, lightprint, or lines samsung clp 300 ... Imaging Unit Reset for Konica Minolta Bizhub C203 / C253 / C353

Dec 14, 2015 | Konica Minolta BizHub C252

1 Answer

My konica minolta c250 is not ready but displaying warming up for a very long time and it did not ready still yet


Warming up means that the copier is not getting hot enough in fuser section, Secondly during that time certain internal house chores are done by the copier to prepare it for READY TO COPY. Are all the image units and toner cartridge OEM!!!??? second has each image unit and toner properly shaking ensure toner in toner cartridges and developer in the image units is spread evenly across each pull each out. shake side ways to ensure spread evenly, last time toner full was run nd gradation adjustments run ?

Dec 02, 2015 | Konica Minolta Konica Bizhub C250 Color...

1 Answer

KONICA MINOLTA BIZHUB C250 Printed only magenta


Does the demo page do the same? Mite have image control board failure. And electrical storms on a good surge protector not a Ace hardware 19.99 special, of course nothing against Ace Hardware :). Could also be a High Voltage board failure. Meter count page OK print out.

Apr 19, 2015 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Konica C250 has a faded line on the prints. Prints colors well except for the Faded line.


The developer powder needs to be replace. for whatever color that's faded, wont be the drums.

Sep 06, 2014 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Konica bizhub c252 printing cyan with white line. what can i do to make the print even? is it the drum or toner and what can i check?


something is blocking the LASER writing to the cyan drum, requires removing the cyan image unit and opening the protective cover of the LASER to clean the glass that it comes out of NO its not on with the image unit out and door open

Feb 10, 2014 | Konica Minolta Konica Bizhub C250 Copier

1 Answer

What is error p-21 of konica minolta bizhub c250?


P-21: Color regist test pattern failure




1 Wipe clean the surface of the transfer belt with a soft cloth, if it is dirty.
2 Change the image transfer belt unit if the transfer belt is damaged.
3 Change the PH unit.
4 Change PRCB.

run halftone prints from service mode to isolate which color is having an issue.

check all image units


Jan 22, 2013 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Bizhub c250 minolta all in one no color printing


What driver are you using? The only reason I have seen when these machines do not print in color is if you are using a PCL6 driver which is black and white only. Be sure you are using the PCL5c driver if you want to print in color.

Sep 24, 2010 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Paper feed and colour problems with Konica Minolta bizhub c250


any stripes are usually caused by imagining unit, first use the tool in front cover to clean laser glasses. inspect IU drums for stripes maybe youll need to change them. is the page coming out ok, but picture is printed crookedly ?

Apr 17, 2008 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Reprint


yes, if your model has a harddrive...

as far as i know your printer should have command tools on a cd... install that software, add your printer there and search in the drivers panel "print & hold" option and check that option!

Jan 29, 2008 | Konica Minolta bizhub C250 All-In-One...

Not finding what you are looking for?
Konica Minolta bizhub C250 All-In-One Laser Printer Logo

353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

Ben
Ben

Level 2 Expert

108 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...