Question about NorStar M7324 Telephone

1 Answer

How do I change the name on a nortel phone? - NorStar M7324 Telephone

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • NorStar Master
  • 860 Answers

To chane the name on the sets you'll need to enter telephone programming.
Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number.
Enter extension number you want to change the name on.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the next key (bottom right arrow) .
The display say Name.
press the Chng soft key.
use the dial pad to enter the name. advance using the arrow soft key to go to the next letter
ex. Bill = 2,2 -> 4,4,4 -> 5,5,5 -> 5,5,5
Press the next key (bottom right arrow) to enter the name.
Press the release key when finished

Posted on Jul 28, 2010

  • 6 more comments 
  • moemoe96961 Aug 04, 2011

    I am new to this site..and not sure how to post something? I am trying to change an extension number..but can not figure how too? I tried to do like posted above, but my phone does not say teminal and sets? Plz help!

  • george  peters
    george peters Aug 05, 2011

    When you enter in f**266344-pw266344 what does the screen say?

  • moemoe96961 Aug 05, 2011

    It says configuration....we got new phones and the extension numbers used to be in the 600's now they are in the 200's and we can not access our voice mail either? Thanks

  • moemoe96961 Aug 10, 2011

    Please help? I tried to do this above but I dont show terminal and sets?? Thanks..

  • george  peters
    george peters Aug 11, 2011

    Sounds like the older template that was used in programming. in that case , to change the names at the A: CONFIGURATION prompt press the next key (the lower right arrow). the screen will say B: GENERAL. press the show key (top right arrow) The first selection will be NAMES, press the show key (top right arrow)and press the show key (top right arrow) again at the set names prompt. At this point the previous instructions will work for spelling the names.

    If the extension numbers changed without someone changing the programming or the system then the memory battery might be depleted.

  • moemoe96961 Aug 11, 2011

    Is this the way I change the extension numbers?? we changed phones and all our ext.# were in the 600's now they are in the 200's but we can not access our voicemail. Thanks

  • george  peters
    george peters Aug 11, 2011

    When you say that you changed your phones are you talking about the whole system or just the telephone sets. Also, what kind of voicemail do you have?

  • moemoe96961 Aug 11, 2011

    Just the voice mail through the phones...Not didnt change the system...he got new/used phones sets only from our sister company and all the extension numbers changed when he hooked up the phones. Thanks

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: changing name in nortel T7316E handset

instructions are toward the bottom of this page:

http://www.telephonemagic.com/phone-support/norstar-feature-programming-code.htm

Posted on Aug 26, 2008

ynotphone
  • 192 Answers

SOURCE: change name on a Nortel M7324

Ok len1845... dependin on your system programming is: To change the name on the phones of a Norstar Meridian:
1. Place the programming overlay on any M7208, M7310 or M7324
2. Press FEATURE * * A D M I N (23646), the display reads Password: ________
3. Enter the Admin password, the default is A D M I N (23646),
the display reads 1. Sys speed dial

4. Press NEXT until the display reads 2. Names
5. Press SHOW, the display reads Set Names
6. Press CHANGE, the display reads Show Set: now dial the extension you wish to change
7. Press CHANGE
8. Enter the name you wish to read on that set
9. Press the next key to exit and save changes
10. Press RLS to exit

Posted on Mar 20, 2009

  • 18 Answers

SOURCE: Changing names on Extensions

Press "Feature **ADMIN", go to NAMES, Then go to Sets, and from their its just like texting

Posted on Oct 01, 2009

consultel1
  • 860 Answers

SOURCE: How do you change names on a Nortel T7316 phone?

Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow).
The display should now ask for an extension number.
Enter extension number you want to change the name on.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the next key (bottom right arrow) .
The display say Name.
press the Chng soft key.
use the dial pad to enter the name. advance using the arrow soft key to go to the next letter
ex. Bill = 2,2 -> 4,4,4 -> 5,5,5 -> 5,5,5
Press the next key (bottom right arrow) to enter the name.
Press the release key when finished

Posted on May 07, 2010

  • 1116 Answers

SOURCE: Nortel phones: Using the Admin to change the

Here is the process for changing names on the system so it relates to an extention

To Log Into the System Programming mode:


1. Press FEATURE * * 2 6 6 3 4 4
2. Enter Password: 2 6 6 3 4 4 Display will read: " A. Configuration"
Using the navigation keys, as displayed below, follow the next simple steps:
3. Press: NEXT Display will read: "B. General Admin"

Changing a name on a phone

4. Press: SHOW Display will read: "1. Sys speed dial"
5. Press: NEXT Display will read: "2. Names"
6. Press the SHOW Display will read: "Set names"
7. Press: SHOW Display will read: "Show set:__"
8. Enter the extension number of which you wish to change the name Display will read: ""
9. Press the CHANGE softkey
10. Using the dial pad spell out the name Ex: If you need the letter K press the 5 key twice and then press # to confirm the letter. Continue until the entire first name is spelled. (note: you are limited to 7 characters)
11. Press: NEXT (if you fail to do this step, the name will not be saved!!!)
12. Press the RLS key

Posted on Jun 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I change name showing on call display?


Do not believe that you can that comes from the phone company .

Sep 22, 2015 | Nortel Norstar T7316E Display Phone

1 Answer

How do you set caller id to show before you pickup on the nortel t7316e


Feature **CONFIG,
Teeminals&Sets,
enter set #,
Telco Features,
1stDisplay,
use Change softkey to cycle between Number, Line, Name
Rls to exit programming.

You need a CI line card in the KSU.

Aug 15, 2014 | Nortel Lands Phones

1 Answer

Is there a way to setup caller id on a Nortel system that show when the phone rings


In system programming, you can select whether the display is the name, number, or line.

F**CONFIG
Terminals&Sets
enter extension #
skip Line Access, Capabilities, Name, User Preferences
Telco Features
skip Feature Assign
at 1StDisplay use CHANGE softkey to toggle to NAME.

Mar 26, 2014 | Nortel Lands Phones

1 Answer

Access Denied


Try Feature ** ADMIN (23646) and password 23646. This should let you in to make name and time changes.

Jun 18, 2013 | Nortel Networks T7316E Telephone Platinum...

1 Answer

How do I get my Mail Box name & displayed name to change for Nortel phone system


The administrator or tech needs to do this from Administration programming (FXXXDMIN), see your office admin or call the tech in for admin training.
Password required as well which the vendor/tech can help with.

If you know password and how to do programming then looks under Sets/***/NAME

Dec 05, 2012 | NorStar T7316E Corded Phone

2 Answers

How do i Change my name on the T7208


I am trying to changed my phone name as the person it belonged to is no longer here now.

Sep 29, 2008 | Nortel Business Series Terminal T7208 -...

1 Answer

Nortel neworks voice


If your system is a Nortel Callpilot just log into your mailbox, then press 8, the first option "Record your name in the company directory" is what I think you're looking for.

Aug 05, 2008 | Nortel Meridian M7208 Corded Phone

1 Answer

Changing names on Extensions


Press "Feature **ADMIN", go to NAMES, Then go to Sets, and from their its just like texting

Aug 05, 2008 | Nortel Norstar 16-Line PBX Speakerphone

3 Answers

Changing name in nortel T7316E handset


We would like to change the name displays on our phones

Mar 05, 2008 | Nortel Norstar 16-Line PBX Speakerphone

Not finding what you are looking for?
NorStar M7324 Telephone Logo

341 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

Jose Ma DM.
Jose Ma DM.

Level 3 Expert

512 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...