Question about Sanyo DS19330 19" TV

2 Answers

Changing program source without remote

I got this tv without a remote, and wanted to hook my dvd player up to it, but am unable to change the program source to use the front A/V jacks because I cannot press the input button on the remote--is there a way to change this on the tv without the remote? Thanks

Posted by on

  • Anonymous Aug 12, 2008

    remote broken

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a sanyo ds 19330 but no remote, what is the code so i may use a remote. thanks

Posted on Jan 27, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 218 Answers

Do a web search for a replacement remote control. If you got the tv without a remote, then I'm guessing you don't have a manual either. Here's a link to a free downloadable manual.

http://www.retrevo.com/search/v2/jsp/downloadPage.jsp?doc=e341b6ad1733d53ba32cb47caf24d013&q=Sanyo+DS19330

Posted on Aug 04, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I want to know how to swich the tv to wach dvd player? the remote works with the tv but how can i swich to wach a movie....i dont want to set up the remote to the dvd...


Sounds like you need to change the input channel of your TV with your TV remote. Look for an Input or Video Source button. Once you've found it, insert a DVD then cycle through the inputs with that button until you see something on the screen. As always this could be undermined by incorrect connections to and from and the DVD player. Double check these as always!

Jul 18, 2011 | Televison & Video

8 Answers

CONNECTING DVD/VCR TO CABLE BOX & TV ETC


moz-screenshot.jpgHI-

Check this site for Info's how to connect your device, click HERE

keep me posted for inquiries, thanks!

Jun 30, 2008 | Philips Magnavox DVD/VCR Dual Player

1 Answer

II HAVE A 13 INCH BRAND MODEL DWT 1304. I JUST WANT TO USE IT FOR A DVD PLAYER. I HAVE NO REMOTE ,HOW DO I CHANGE THE TV TO PLAY DVD OR VEDIO


Connect the composite video RCA (yellow) cable output of the DVD player to the TV's video input RCA (yellow jack). Connect the red and white RCA cable from the DVD players audio output to the TV's audio input (red and white jacks). Select the source input from the TV's control panel - if it has an input selector switch, set it to select the video source from the front panel input jacks if you connected the three cables - yellow, red and white on the front of the set. Or, change the channel to receive the video auxiliary input source instead of the broadcast station.

Dec 20, 2010 | Durabrand DWT1304 13" TV

1 Answer

I have a Soyo Model# DYLT032C. My remote has been broken since I bought the TV. However, I'm just trying to make the DVD Player work. No cable TV, just want the DVD working. Since the TV Remote is...


As you look at the tv from the front, you have the tv function keys on the lower right hand side, press the key described as source once at a time till you get to the input you are using for the dvd player, ex: if dvd is connected to input 2, press the source key repeatedly untill you get to input2, this should give you control over the external inputs you are trying to use. As for the remote control, there should be a universal remote control you can program to use with your soyo tv.

Jan 30, 2010 | Televison & Video

1 Answer

We have a Panasonic 1080P Plasma TV hooked up to BrightHouse Cable and a Blue Ray player. We use a Brighthouse remove to control all. We are trying to hook up a Panasonic DMR-E80H DVD Recorder. We are...


If your tv has inputs for many devices you can connect them. You need to simply change the tv input SOURCE to whatever #/type of input you want to view from.

You can use an y remote if programmed properly- that is another issue. programming the remote to control that deviovce but first see if it works right.

if the brighthouse remote can control the tv, change the input or source to whatever the dvd is in, other wise try the tv remote.

make it simple first, then you can try getting the one remote to control it IF it can.

my cable remote cannot control all my devices but does the tv.

Mar 25, 2017 | Panasonic Televison & Video

1 Answer

Can't change from HDMI2 back to HDMI1


You need to change via tv selections option for tv, this should be possible by selecting the source for tv feed. This should give various options to select hdmi11, hdmi12, scart1 ect. If remote not working to change look on the tv itself for the control buttons, normally on the back to 1 side (rh from front) then pressing the correct button. If this does not work try turning power off to tv for a couple of minutes and then turning back on. Hope this helps.

Apr 29, 2017 | Vizio Televison & Video

2 Answers

I'm confused how to connect my DVD player with the TV. which cables connect where. I dont have a user manual.


Mukhhe,

good day,to connect your DVD to TV screen follow this steps.

1) prepare your RCA cable ( 3 colored cable yellow/red/white)
note: always remember this

yellow = video
red and white = Audio (left and right)

2) at the back or front display of your TV screen you'll see RCA socket marked as "AV1 input" "AV2 input" etc... if your screen is only mono sound you can only see two sockets Yellow=video white= audio

3) at the back of your DVD player connect the RCA cable following the color code yellow to yellow white to white and red to red. after you connect the cable to your dvd player now connect the other end of thr RCA to your TV screen input.

make sure you'll connect it to "A/V input" not "A/V out" then after connecting all the cables, from the remote commander of your TV screen press a button indicating "A/V" some mark as "TV/AV" press this button until your screen display the back ground display of your DVD player.

cheers,
mark

Jan 30, 2009 | Spectroniq PDV-70X

2 Answers

Please help


You can find the manual here:

http://www.retrevo.com/search/v2/jsp/downloadPage.jsp?doc=b7a9e24543cb9cdef7c4e094fb734a9a&q=Sanyo+DWM-400

They will make you enter your email address if you want to download the manual.

I'm not sure you'll need the manual if you have a newer TV and want to hook this up the way most people do.

Just about all new televisons have a variety of video inputs. Typically you use one for your Cable box, one for your DVD (or VCR). When you wish to watch cable you "tell" your TV you want to view that input and when you want to watch the DVD player you tell the TV that's the input to use. Most Cable Box remotes are set up to control the TV so you can change the input without having to use the original TV remote. You can also, generally, change the TV input from the front panel of the TV set. If you give me the make/model of your TV I may be able to help you figure out how to switch inputs.

But back to the DVD. I downloaded the manual and this DVD can generate output in a few different formats. The easiest will probably be the jacks numbered 2 which is the Audio There are two them, one is RED, and one is WHITE, and jack number 4. This is the Video and will be YELLOW in color. I'll be the DVD player came with a cable set that has three connectors on each end. They will be colored YELLOW, RED, and WHITE.

You should simply need to plug one end of this cable set into the jacks mentioned above on the DVD player and then plug them into one of the inputs on your TV. Pay attention to which TV input you use because you'll need to select that input to watch the DVD.

If you have an older TV we will need to use a different method to hook up the DVD player.

Now for the editorial section. I'm not paid for this. I know it's a strange hobby, but I like helping when I can. If you have more questions please ask before you rate this solution. If anything I've offered here has been helpful I hope you'll rate this solution positively. About half of the solutions I've offered have never been rated. Thanks and good luck.

Jan 09, 2008 | Sanyo DWM400 DVD Player

1 Answer

Progressive scan


Approach 1: Try unplugging the DVD player from the wall for an hour, then plug it back in. It may or may not reset to the factory default settings, which might put it back to "interlaced" output.

Approach 2: When a DVD player is switched to progressive scan, it uses outputs different from the coax cable "TV out" and the COMPOSITE outputs (often yellow, white and red RCA jacks. If you have the proper cables, you can connect them to both the DVD player and the TV, then cycle through the AKAI TV's "source" settings to switch the TV to the new cable input location.

For example, if the DVD player has "component" outputs (marked Y, Pb, and Pr) hook up RCA plug cables between those jacks and the AKAI TV's Y, Pb, and Pr jacks. Connect the Y to Y, the Pb to Pb, and the Pr to Pr, of course. The LCT3285TA has two sets of these jacks. Either will do, but note if you use YPbPr1 or YPbPr2. Once this is done, push the source button on the side of the TV (or on the TV's original remote) until it shows YPbPr1 or (...2 if that's what you connected). If the DVD player is on, you should now see the DVD menu or the picture from the DVD. Now you can use the DVD remote to switch back from progressive to interlaced video. The picture may go blank at this step.

Now push the TV's source button again until you see "3" or whatever channel you had been using in the upper left of the TV screen. You should see the DVD output picture (menu) again. Back to normal.

If your DVD player doesn't have YPbPr connections, it may have a HDMI or DVI jack.
The AKAI TV also has a HDMI input, you *could* get and HDMI cable (or DVI to HDMI cable if the DVD player doesn't have HDMI), hook it up, then cycle through the TV's source inputs until you see the HDMI in the upper left... in the manner I've just described.

Final Note: The progressive scan output of your DVD will actually give you a much better picture on your AKAI TV than its interlaced output. To take advantage of that, you'll have to hook up YPbPr or HDMI cables between player and TV and switch sources when you want to watch DVDs instead of TV programs. You may need additional cables to send the stereo audio output from the player to the TV for the progressive source hookup.

Jan 05, 2008 | Akai LCT3285TA 32 in. LCD Television

3 Answers

Hooking up a dvd player to my durabrand tv


If it is a durabrand dwt1304, you cannot switch the input to EXTERNAL (the front jacks) without a remote. There is a good one at Radio Shack for eight bucks, the 3-in-1 remote. The program code is 0171, and you switch the TV inputs with the A/B button.

Dec 13, 2007 | Durabrand DWT1304 13" TV

Not finding what you are looking for?
Sanyo DS19330 19" TV Logo

1,759 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74666 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

 Grubhead
Grubhead

Level 3 Expert

5259 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...