Question about OCE 3140 Copier
There is toner/starter spilled onto a sensor near the drum, it mite just need to be cleaned, this sensor monitors the drums abililty to develope a image, if the cleaning does not work it mite be the sensor or the drum. The drum needs to be removed to clean the sensors.
Posted on Aug 01, 2009
When you installed the button manager you should be able to go in and change the SC descriptions ex. SC1, SC2 - SC6. When you use the sharp desk to scan you are operating in a pull scan but when you use the SC programs you are using the push scan mode. You can change the SC mode when you put the copier into scan mode.
Posted on Oct 12, 2009
I am glad to help you.Press the "ADDITIONAL FUNCTIONS" button located to the right of the display. Select "communication settings". Now press "TX SETTINGS".Now press "common settings".Now press "Edit standard send settings". You will now see a screen that allows you to set the DPI value and file format.You will have drop down menus for each that allow you to change these settings. Once you have selected your preferred settings press the "OK" button located at the lower right. I have "FIXEDYA". :-) Rememeber, you can change these settings of a case per case basis on the main send srceen. Be well and smile when you get a chance.Please let "fixya" know I have helped. Thanx
Posted on Jan 24, 2011
Tips for a great answer:
Mar 04, 2014 | Printers & Copiers
Sep 27, 2012 | Konica Minolta Bizhub c203 Copier
Dec 20, 2010 | Konica Minolta bizhub C250 All-In-One...
Jul 29, 2009 | Sharp AR-235 Copier
Jul 21, 2009 | Konica Minolta bizhub 350 All-In-One Laser...
May 07, 2009 | Konica Minolta bizhub 250 All-In-One Laser...
Mar 31, 2009 | Minolta Di3510f Bizhub Copier
Mar 30, 2009 | Konica Minolta bizhub C351 All-In-One...
341 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: