Question about Canon IR1018J Black and White Copier

2 Answers

When I switch on it brings Download standby. Why?

Posted by on

  • sbtgonza1 Jul 29, 2010

    no it cannot print in this mode.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer got voted for 20 times.

  • Contributor
  • 51 Answers

Try this...
Press and hold #'s 1 and 9 and turn the machine On. If the same message on LCD, call service center.

They will upgrade the firmware of the main controller of the machine using Service Support Tool which is available only in Canon.

Posted on Sep 20, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 415 Answers

Sorry mate but try this
http://www.fixya.com/users/goodgold
he seems to be more of an expert I sure he can help you just ask him
good luck,
and hope your problem is resolved

Posted on Jul 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My pioneer sx-316 multi channel receiver is off on protected mode what do I do to restart


I read the instructions perhaps slightly differently perhaps. I take the instructions to mean first hold down tone and then hold standby/on key for three seconds. Have you tried doing it as two steps?

1 Switch the receiver into standby.
2 While holding down the TONE button, press and hold the  STANDBY/ON button for about three seconds.
3 When you see 'RESET?' appear in the display, press the ENTER button. OK? shows in the display.
4 Press SETUP to confirm.

Feb 03, 2015 | Pioneer New Original SX316S Remote Control

1 Answer

Fender Hot Rod Deluxe. Works great except when I turn the amp off it crackles pretty loud. It takes about 5-10 seconds for the crackle is heard. If I turn the standby switch first, then wait a minute or...


As voltages drop, electronics gets unstable as it goes down and becomes noisy... this may be the nature of this beast. Opening the standby might be the best way to avoid the problem.. Here is your schematic for service:

http://elektrotanya.com/fender_hot-rod-deluxe_sch.pdf/download.html

Scroll down to "get manual" and click to download. IGNORE other download links.
Opening the standby switch turns off power to the main amp so noise generated in the preamp will not be amplified.

Jul 25, 2011 | Fender Hot Rod Deluxe Guitar Combo...

1 Answer

It is not booting only the fan coming on and standby power light showing


It could be better if you bring us details about this issue. Recently, I had a similar situation with a SW-C3750-48TS-S which was in stack. Just after we removed it from the stack, it starts the fan and the light of SYST is Green but you cannot log in.

Feb 15, 2011 | Cisco Catalyst 3560-24PS Switch

1 Answer

HP monitor w1907 lcd switches off to standby.


your hp monitor has an electronic component problem inside, probably some busted capacitors or ccfl lamps that failed to light...best is to bring the unit to a qualified LCD repair center near you..

May 09, 2010 | HP w1907 LCD Monitor

1 Answer

I turned on my computer the power light keep blinking and my computer will not come on


Your computer is in STANDBY mode..
To bring it back....There will be a SLEEP/ STANDBY button on your keyboard...press it..
This should solve your problem...

ELSE....

There is problem with your SMPS(Switch Mode Power Supply) which is in your CPU case..Try Replacing it..

Jun 15, 2009 | Dell Dimension 4700 PC Desktop

1 Answer

The Monitor not works after the Standby Mode or Switch off


If you have not tried yet, pick a can of freeze-it, or other. Gain access, safely power up and when the monitor goes into standby, hit the area and cool down the IC's. If they are overheating, this has a good chance of bringing them back and identifying your problem. If so, look at better heatsinks, reapply new paste, or install a muffin fan, or seek better ventilation.
Heat is the enemy of all IC's.

May 19, 2009 | IBM P 260 (Black) 21 in.CRT Conventional...

2 Answers

Computer does not stay in hibernation or standby mode


That happen because on the stand by or hibernate setting the time was setting in 5 minutes.
Go to Control Panel >> Display >> Screen Saver >> Power

And set the time right there as your preferences.

Oct 01, 2008 | Toshiba Satellite A135-S2276 Notebook

Not finding what you are looking for?
Canon IR1018J Black and White Copier Logo

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1985 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...