- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Press and hold the "clock" button. You will hear a beep and the display will begin flashing a number which represents the day of the week. 1=sun, 2=mon, and so on. Press the left and right arrow buttons to scroll through. After choosing the day, press the "clock" button again to set the hour. It will start with 12 am and go through 11pm. Press "clock" again after setting the hour to set the minute.You will be able to scroll through 0-59 to choose the minute. When finished, press the "clock" button again to exit the time setting feature.
I have model no. 1188 bellsouth digital answering machine. If you have to leave a message, the message I recorded is no longer there, there is a generic message saying please record your message. How do I go back and record my voice with my message. I cannot find my original manual.
On the 2006c there is a small sticker on the back of the unit with the three-digit code. Also there is a button on the front of the unit which says "code". Press it and the code should appear on the display. It's very unlikely that the code would be printed in the manual, so it would have to be somewhere on the unit.
Hi Diana - To record your outgoing message, hold down your ogm button ( outgoing message) for two seconds and it will ask you to record a message. To play back your message, just push the same button and it will play your message. If you don't like it just do it again. If this solves your problem PLEASE rate this as fixed. If you need more help just add a comment and I'll be happy to assist you further. Thanks and have a good day.
For BellSouth model 1184 digital answering system:
To set day and time, hold down "time/code" button for a few seconds. Press "time/code" again to select what you want to change. To adjust the day, use the forward and backward arrow buttons to scroll through the days. When you find the correct day, press "time/code" again, and this will allow you to adjust the time. Again, use the arrow buttons to scroll through the hours, minutes, and am/pm, pressing the "time/code" button to set the correct selections and move onto the next setting option.
Found my manual! To set the time, press and hold the time/code button for 2 seconds. You will hear "TO SET CODE PRESS TIME AND CODE BUTTON." Release the time/code button. Press the 2 way/m button once. You will hear "SET DAY AND TIME, SUNDAY" Press the << or >> button until you hear the correct day. Press the time/code button once. You will hear "TWELVE" Press the << or >> button until you hear the correct hour. Press the time/code button once. You will hear "OH". Press the << or >> button until you hear the correct minutes. Press the time/code button once. You will hear "PM". Press the << or >> button if you need to change to AM. Press the time/code button once and you will hear the complete time and day setting.
To record an outgoing message, press and hold the ogm button. Release the ogm button and start to record after you hear "PLEASE RECORD AFTER THE TONE" followed by a beep tone. When finished, press the ogm button.
Make sure you put a battery in the answering machine so you don't lose these settings if the power goes out!