Question about Philips 42PFL5332D 42 in. LCD Television

2 Answers

I have a phillips 43p8341 projector tv. When you plug it up after its sitting for a while it stays on with no problem. After 30 min to an hour none of the functions work. You can't turn down the volume, can't press the menu and can't turn it off with the buttons on the tv or remote. At that point you have to unplug it to turn it off and it won't come back on. Tv repair shop told me my main board needed to be replaced. The term main board wasn't well known among tv part sellers and after a week of talking to different part sellers i took the back of the tv off and physically looked at the board and found out that it has a ssm board, large signal board and a smaller ss board connected to the ssm board. I'm trying to find out which of these three boards control these functions because these parts are expensive and i want to get the right part. Went back to tv repair shop to ask about the main board and he started to give me different answers and tried to sell me a tv.

Posted by on

  • rogersechols Jul 29, 2010

    I have a phillips 43p8341 projector tv. When you plug it up after its sitting for a while it stays on with no problem. After 30 min to an hour none of the functions work. You can't turn down the volume, can't press the menu and can't turn it off with the buttons on the tv or remote. At that point More
    I have a phillips 43p8341 projector tv. When you plug it up after its sitting for a while it stays on with no problem. After 30 min to an hour none of the functions work. You can't turn down the volume, can't press the menu and can't turn it off with the buttons on the tv or remote. At that point you have to unplug it to turn it off and it won't come back on. Tv repair shop told me my main board needed to be replaced. The term main board wasn't well known among tv part sellers and after a week of talking to different part sellers i took the back of the tv off and physically looked at the board and found out that it has a ssm board, large signal board and a smaller ss board connected to the ssm board. I'm trying to find out which of these three boards control these functions because these parts are expensive and i want to get the right part. Went back to tv repair shop to ask about the main board and he started to give me different answers and tried to sell me a tv. Really don't know much about the actual names of the parts but between the ssm board, large signal board and ss board. Which one would it be? I found a ssm board for $272.00. I found a large signal board for $125 used and $195 new. I also found a ss board for $100. Which one would most likely be the one i need?

  • rogersechols Jul 29, 2010

    Great Experts and the solutions were very helpful. I'm sure i will be back to get many more answers i need in the future.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,112 Answers

You are correct the name for these boards for phillips ss and ssm boards. The one you are interested in is the SSM Small Signal Module. Also know as the System control Board. Heres a good way to find it, just take off the back and trace the control keypad straight to the SSM. this is the board that has the microprocessor on it and controls all funtions including menu functions.

Posted on Jul 29, 2010

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 8,457 Answers

It the Tuner signal board.Some call it the main board or main logic board.This Tuner board,take the broscating signal in.Tries websites like Shojimmy.com,Ebay.com to buy a refurbish Tuner board for the replacement.

Posted on Jul 28, 2010

  • rogersechols Jul 28, 2010

    Really don't know much about the actual names of the parts but between the ssm board, large signal board and ss board. Which one would it be? I found a ssm board for $272.00. I found a large signal board for $125 used and $195 new. I also found a ss board for $100. Which one would most likely be the one i need?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset my Phillips TV if it will not come on?


Try unplugging all your tvs from mains and keep unplugged for a few hours. try to plug back in and attempt to turn on. See if this trick works. Likely there could be some internal damage in power supply or it could be fuses.

Oct 03, 2014 | Philips TV Tuner Video Capture PCI Card -...

1 Answer

It stays on for 15 or 20 mins then light goes out but sound still plays with light out,then 4mins later it comes back on


Sounds likely that the projector is overheating. Try removing and carefully cleaning the filters over the air inlets. Carefully washing them in warm water and squeezing dry is usually satisfactory, but DO NOT replace in the projector and turn on until the filters have had at least 10 - 12 hours to thoroughly dry out.

Mar 29, 2014 | Christie DS+60 Multimedia Projector

1 Answer

My rca 60" hdtv projection d56w20 model it plays great for 30 min" to a hour and make,s pop sound and goe's off have to wait 20 to30 min's to get it back on thompson-alice@att.net


probable its the case of overheating, ensure the projector has proper ventilation, clean the air filter's, if possible try using additional 2.5" or 4" fans to keep the projector cool

Jul 29, 2010 | RCA Televison & Video

2 Answers

TV wont stay on.


Similar problem with my Sony. unplug for 36 hours and try again

Aug 13, 2009 | Samsung HL-R6767W Replacement Lamp

1 Answer

Optoma H31 - Turns itself off !


sounds like the projector lamp to me. the rated hours are always up to the published hours and never "this is what you will achieve." I would suggest getting a lamp as you will need one shortly by the sounds of it. In many cases the projector does this as it is programmed to protect itself from the lamp shattering inside the projector. Let me know if you would like a quotation for a lamp as we ship internationally. Regards Kevin Andreassend. http://www.iceav.co.nz iceavtech@gmail.com +64-9-4142348

Mar 28, 2009 | Optoma H31 HOME THEATER PROJECTOR...

1 Answer

Phillips tv


Are you connected using R,G,B (component) cables? Check them to make sure they are in firmly - if so, then try a new set - that may very well fix the rolling issue. (Unless the rolling is caused by poor antenna reception).

Press "Sleep" on the original remote control for this TV if you still have it until the TV says "Sleep OFF".

If no strong TV signal is detected, this unit goes into sleep mode, which may explain Tuner B shutting off after 5 minutes.

Feb 23, 2008 | Philips TV Tuner Video Capture PCI Card -...

1 Answer

Phillips 43p8341 tv keep shutting off


some of the parts you can find online some you cant.it aounds more like the power supply than anything else

Oct 05, 2007 | Philips 43P8341 43" Rear Projection...

1 Answer

Phillips 30" Mod 30pw633r37a


I unplugged it for 24 hours. When I plugged it back in it was ok. It has done it a couple of times since, but only for a few seconds.

Sep 02, 2006 | Philips 32PW8608 32" TV

3 Answers

Powers off by itself.


Power supply or sweep suppys have parts that are overheating and breaking down or cold solder connections. Call someone who knows this set like the local authorized magnavox/Phillips dealer/servicer. Good Luck

Aug 04, 2006 | Philips 60P8341 60" Rear Projection...

Not finding what you are looking for?
Philips 42PFL5332D 42 in. LCD Television Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...