Question about HP 12c Calculator

Ad

Turn the calculator off. Press and hold the decimal point key while pressing the ON key.

Repeating the procedure will switch it back.

Posted on Jul 28, 2010

Testimonial: *"Thanks for your response. Somehow, rght after I submitted my questions, I was able to get it working, though not sure what keys I hit."*

Ad

Hi there,

Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

clear ,clear ,clear and reenter correct .

Feb 21, 2015 | HP 12c Calculator

I don't know which particular calculator model you have, but for an HP-12C, the manual says the following:

**Digit Separators **

As a number is keyed in, each group of three digits to the left of the decimal point is automatically separated in the display. When the calculator is first turned on after coming from the factory - or after Continuous Memory is reset - the decimal point in displayed numbers is a dot, and the separator between each group of three digits is a comma. If you wish, you can set the calculator to display

a comma for the decimal point and a dot for the three-digit separator. To do so, turn the calculator off, then press and hold down the [.] key while you press [ON]. Doing so again sets the calculator to use the original digit separators in the display.

As a number is keyed in, each group of three digits to the left of the decimal point is automatically separated in the display. When the calculator is first turned on after coming from the factory - or after Continuous Memory is reset - the decimal point in displayed numbers is a dot, and the separator between each group of three digits is a comma. If you wish, you can set the calculator to display

a comma for the decimal point and a dot for the three-digit separator. To do so, turn the calculator off, then press and hold down the [.] key while you press [ON]. Doing so again sets the calculator to use the original digit separators in the display.

Oct 25, 2013 | HP Office Equipment & Supplies

Near the 0 key, the calculator has the markings **dot forward slash comma in BLUE.** Thus to change the decimal mark from dot to comma or from comma to dot, press the LEFT SHIFT Blue key, followed by 0. The radix mark will toggle from one to the other.

Jan 18, 2011 | HP 20s Calculator

Decimal Point and Separator Symbols

You can use the display setup (Disp) screen to specify the symbols you want for the decimal point and 3-digit separator.

• To change the decimal point and separator symbol setting, press the MODE key a number of times until you reach the setup screen shown below.

Display the selection screen. (Disp) 1.

Press the number key ( 1 or 2) that corresponds to the setting you want to use.

1(Dot): Period decimal point, comma separator

2(Comma): Comma decimal point, period separator

You can use the display setup (Disp) screen to specify the symbols you want for the decimal point and 3-digit separator.

• To change the decimal point and separator symbol setting, press the MODE key a number of times until you reach the setup screen shown below.

Display the selection screen. (Disp) 1.

Press the number key ( 1 or 2) that corresponds to the setting you want to use.

1(Dot): Period decimal point, comma separator

2(Comma): Comma decimal point, period separator

Nov 27, 2010 | Casio FX-300MS Calculator

Hi,

P12c display from Comma to Point This document describes how to change the display of the decimal point on the HP 12C (HP12C) Calculator from a comma (commas) back to a decimal point.

**Instructions**

Explanation The comma is the European equivalent of the decimal point.

This procedure is also applicable to HP12CP (Hewlett-Packard 12c Platinum) and HP12CPA (Hewlett-Packard 12c Platinum 25th Anniversary Edition).

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

P12c display from Comma to Point This document describes how to change the display of the decimal point on the HP 12C (HP12C) Calculator from a comma (commas) back to a decimal point.

- Turn off the calculator.
- Hold down the decimal point.
- Continue to hold the decimal point key, while turning on the calculator.

Explanation The comma is the European equivalent of the decimal point.

This procedure is also applicable to HP12CP (Hewlett-Packard 12c Platinum) and HP12CPA (Hewlett-Packard 12c Platinum 25th Anniversary Edition).

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Feb 04, 2010 | HP 12c Calculator

From HP12c FAQ:

This document describes how to change the display of the decimal point on the HP 12C Calculator from a comma back to a decimal point.**Instructions**

**Explanation**
The comma is the European equivalent of the decimal point.
*

For more information about your machine (data sheets, learning modules, manuals, FAQs, etc), check this link:

http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/215348-215348-64232-20036-215349-33525.html

This document describes how to change the display of the decimal point on the HP 12C Calculator from a comma back to a decimal point.

- Turn off the calculator.
- Hold down the decimal point.
- Continue to hold the decimal point key, while turning on the calculator.

For more information about your machine (data sheets, learning modules, manuals, FAQs, etc), check this link:

http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/215348-215348-64232-20036-215349-33525.html

Aug 08, 2009 | HP 12c Calculator

It's been awhile since I used one of these but there should be a decimal function on the keys. Make sure you put a 2 in there before pressing it and it should display the format using 200.00

Nov 30, 2008 | HP 12c Calculator

To change the ´comma´, make sure the calculator is switched to off, press (.) key and maintain, switch the calculator ON. This operation changes dot to comma and vice-versa.

Jul 18, 2008 | HP 12c Calculator

Turn the calculator off, then press and hold down the .(decimal key) while you press the on button. Doing so again sets the calculator to use the original digit separators in the display

May 10, 2007 | HP 12c Calculator

147 people viewed this question

Usually answered in minutes!

×