Question about Motorola PTP 600 Series Lite, 5.8 GHz 150Mbps, Integrated Antenna, Full Hop, NLOS (BP5830BH15-2AA)

1 Answer

Using internet explorer version 8 I can not connect to the web browser interface of the ptp 600 radio by entering the IP address of the radio. Connection was verified by being able to ping the IP address of the radio using a command window.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

You can try compatibility view under tools but IE8 should have nothing to do with the ping utility in command prompt

Posted on Jul 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unable to load client protocol


b> Internet Protocol, also known as IP, is a communication protocol which heavily uses the TCP/IP standards for packet switch internetworking. IP manages addressing methods for data encapsulation and delivery. IP was developed by the United States Department of Defense and is now widely used by the public. IP Version 4 is the fourth version of Internet Protocol and the first one to be deployed to the public. Updating and installing Internet Protocols are important to the integrity and reliability of your Internet connections.

Click the "Start" button at the bottom of your desktop screen. Click on "All Programs." Select "Run" from the Accessories folder. Type "CMD" in the run dialog box. The command prompt window will appear. Type "Netsh Interface ipv4 install" on the command prompt line. Press "Enter." Restart your computer.

Add or remove a network protocol, service, or client
http://windows.microsoft.com/en-GB/windows7/Add-or-remove-a-network-protocol-service-or-client

Feb 06, 2013 | Microsoft Internet Explorer 8

1 Answer

Remoteing to a bizhub printer using internet explore8


Open internet explorer 8 by simply double clicking on it.Now in address bar, enter/type the IP address of your photocopier machine.After entering the IP address press "ENTER"Web connection page will appear.Thats all..

Jan 06, 2012 | Konica Minolta bizhub C250 All-In-One...

1 Answer

How do i connect to Panasonic Wj-hd716 from my iphone?


so far, you cannot view the Panasonic WJ-Series Recorder using other browser than Microsoft Internet Explorer. because it use ActiveX Component to view the Video.

you can acess the Web Base interface of the DVR, just input the IP Address of the DVR, set disable pop up blocker for your browser, then it will show.

in some case, other browser than Internet explorer won't show the web correctly.

Sep 07, 2011 | Panasonic Wj-hd716/4000 16-ch Real-time...

1 Answer

I need to setup my d link router but ip address wont work on my web browser?


you may need to use internet explorer firefox wont work for me Open http://192.168.0.1/ in your web browser ie internet explorer and btw buddy this is not your ip adress it is your settings ip that will help get your question asnwered quicker in future

Feb 17, 2011 | D-Link DIR-600 Router

1 Answer

Need to allow a telnet session thru a speedstream 5660 modem/router having a public ip and allow it to connect to a private ip on the internal LAN. how do i accomplish this?


According to the user manual:
Page 16:

HTTP Web-browser Access

Most HTML browsers can be used, though Internet Explorer 4.0 or Netscape 4.0 are recommended. IE 2.0 and Netscape 2.0 and their predecessors are not supported. The HTML interface can be used to access the LAN (or WAN) IP address or it can be used with FTP to upload and download files to and from the router.



To log on to the modem via HTML:

1 Bring up your favorite web browser.

2 Enter the Ethernet IP address of the router (10.0.0.1 or Speedstream) in the "Location" or "Address" area where you enter web page addresses.

3 Refer to "HTML Web Interface" on page 20.


Page 20:

HTML Web Interface

The HTML interface for the router first displays a page showing the current configuration of the router. The first page also provides links to the following functions:

.

.

.

Advanced Setup

Leads to a more detailed interface with several links that allow more in-depth configuration of functions available on the router. This interface provides the following links:

Configuration Procedures

Status and Statistics

Command List




This is where the user manual ends. I would suggest clicking "Configuration Procedures" and find the section for configuring Network Address Translation (NAT).
In that section (if it exists), you'll want to provide the private IP address of the computer running the Telnet server and forward port 23 to this IP address.
If NAT capabilities do not exist, I would consider changing the router to Gateway mode (described in the user manual) and buying your own router to handle the NAT firewall.

Dec 29, 2010 | Efficient Networks SpeedStream 5660 Router

1 Answer

Reset cisco airnet 1130ag


There are 2 ways to reset the access point.

Using the MODE Button

Follow these steps to delete the current configuration and return all access point settings to the factory defaults by using the MODE button:

1. blank.gifOpen the access point cover

2. blank.gifDisconnect power from the access point (the power jack for external power or the Ethernet cable for in-line power).

3. blank.gifPress and hold the MODE button while you reconnect power to the access point.

4. blank.gifContinue pressing the MODE button until the Ethernet LED turns amber. (approximately 2 to 3 seconds). Then release the button.

5. blank.gifAfter the access point reboots, you must reconfigure it using the web browser interface, the Telnet interface, or the access point console port.
Using the Web Browser Interface

Follow these steps to delete the current configuration and return all access point settings to factory defaults using the web browser interface:

1. blank.gifOpen your Internet browser. You must use Microsoft Explorer (version 5.x or later) or Netscape Navigator (version 4.x or later).

2. blank.gifEnter the access point IP address in the browser address line, and press Enter. An Enter Network Password screen appears.

3. blank.gifEnter the username Cisco in the User Name field.

4. blank.gifEnter the password Cisco in the Password field and press Enter. The Summary Status page appears.

5. blank.gifClick System Software. The System Software screen appears.

6. blank.gifClick System Configuration. The System Configuration screen appears.

7. blank.gifClick the Reset to Defaults button.

Note blank.gifIf the access point is configured with a static IP address, the IP address does not change.

8. blank.gifAfter the access point reboots, you must reconfigure it.

Aug 13, 2010 | Cisco Aironet 1131AG 802.11a, 802.11g/b...

1 Answer

Pls. help us,how can we used land cord to connect printer konica 7035 to computer. we already down load a driver from internet . we try many times to check sa IP address and test print but still we cannt...


Using arp command (UNIX)
From UNIX you can use the arp command to assign the IP address to the network interface card.
Perform the following procedure:
1. Turn off the print controller and the main body printer.
2. Log in as superuser on a host on the same subnet as the network interface card. However, if
the server resides on another subnet, complete this procedure to store the IP address in the
network interface card.
3. Find the MAC address of the network interface card. The address is printed on the Status Page
each time you turn on the print controller and the main body printer.
4. Edit the hosts file (usually /etc/hosts) or use NIS or DIS to add IP address and node name of
the network interface card. See the network administrator for the IP address. For example, a
network interface card with a name of printfast and an IP address of 192.9.200.200 has the
entry:
192.9.200.200 printfast
5. Add an entry to the arp cache for IP address and Mac address of the network interface card,
as:
arp -s 192.9.200.200 0:40:c8:0:0:ff
RS6000 (AIX) requires the ether option after arp -s. For example:
arp -s ether 192.9.200.200 0:40:c8:0:0:ff
6. Check the print controller and the main body printer to see that the network interface card is connected
to the network. Turn on the print controller and the main body printer.
7. Send a ping command to the network interface card to verify it is running on the network, as
for example:
ping 192.9.200.200 or ping printfast
The network interface card will not respond to this ping command but it will read its IP address
from the packets.
8. Turn off the print controller and the main body printer and back on again and then send the
ping command again to verify that the network interface card obtained its IP address. A confirmation
message displays as:
192.9.200.200 is alive
9. Remove the entry from the arp cache using the following command. Specify the network
interface card either by its IP address or by its name, for example:
arp -d printfast
Konica Network Interface Card INSTRUCTION MANUAL 2-5
Chapter 2 Setting Up the Network Interface Card
Using MAP
By using MAP (Management Access Program) included the CD-ROM that comes with the network
interface card, you can automatically identify the network interface card on the network and set it up
for TCP/IP by using Web Utilities. To use this method to assign the IP address to the network interface
card, the following procedure should be performed on computers in advance:
• TCP/IP correctly configured
• IPX/SPX-compatible protocol installed
• MAP installed and MAP setup correctly executed
About how to set up TCP/IP and how to install IPX/SPX-compatible protocol, refer to Windows Help
menus for example. For MAP, refer to “Using MAP (Management Access Program)” in this chapter.
To change an IP address already assigned to a network interface card, you can not use the
arp command. Use Web Utilities instead. These methods also allow you to set up subnet
mask and default gateway, etc.
Using NIManage
Refer to “Chapter 7 AppleTalk Configuration”.
 Accessing Web Utilities
The network interface card is provided with an HTTP server having Web Utilities. By accessing this server,
you can change settings of the printing system. There are two ways to access Web Utilities, through a Web
Browser, either through Netscape Navigator, version 4.x or greater or through Internet Explorer, version 4.x
or greater.
• Use MAP to have the network interface card on the networks identified automatically, thereby accessing
Web Utilities.
• Use a Web Browser to type the IP address assigned to the network interface card, and thereby access
the Web Utilities. For example:
http://192.168.0.128/
If you designate the proxy setting in your Web Browser you cannot access the Web Utilities.
For more information see your network adminisrator.
Chapter 2 Setting Up the Network Interface Card
2-6 Konica Network Interface Card INSTRUCTION MANUAL
 Using MAP (Management Access Program)
A utility called MAP is provided on the CD-ROM that comes with the network interface card.
This program automatically identifies the network interface cards on the networks and lists them on Web
Browser screen. From this Web Browser list you can select a network interface card to change its settings
and control Web Utilities.

Aug 31, 2009 | Konica Minolta Office Equipment & Supplies

1 Answer

Zyxel 600 security


Open a web browser like internet explorer or firefox. Enter the ip address of your router in the address bar of your browser. By default the ip address should be set to 192.168.1.1. You should see a box prompting you for your username and password.

Enter your username and password now. By default the username is admin, and the password is 1234. Click the Ok button to log in to your router

Click on wireless setup and you should have options there to change the security settings and setup a WEP key(password).

once you do this.
click on start
click on run
type ncpa.cpl
right-click wireless local area connection
click on view available wireless networks
and connect to your network again using the new password that you have just setup

Feb 20, 2009 | Zyxel Prestige 600WH Wireless Router...

1 Answer

I need to change the IP address on my hp color laser jet 2840 coud you help me with that


Hi,
Most HP printers can be reset to factory defaults (or cold-reset ) by turning the printer off and holding down the Online or Go button while turning the printer back on. The printer control panel display should read "Cold Reset" or "Restoring Factory Settings" or something like these lines. This will remove any IP address that the printer had previously.
When you plug it in, your router should have assigned an ip address automatically. Go into your router and look at the attached devices and it will show you what ip address has been assigned to each device on your network.

Use Web Interface or Manually Assign an IP address NOTE: Network HP Printers allow you to manage them via Internet Explorer. You can enter the IP address that the printer currently has and access its configuration settings. This assumes that the web interface hasn't been locked.
NOTE: We recommend that you install the latest version of Sun's Java software before trying these steps. See this How To: How to Update Sun's Java 2 Runtime Environment Plug-in.
  1. Print the Configuration page if needed. You will be entering the "current" IP Address.
  2. Open Internet Explorer. Delete EVERYTHING from the Address line.
  3. Enter the IP Address in the Address line and press Enter.
  4. You should then connect to the printer. If this fail, go to the next section to assign the IP address manually.

    NOTE: There are 2 basics versions of the web interface. Type 1 is on newer printers. Type 2 is on older models

  5. Type 1: Click the Networking tab.
    Type 2: Click the Administration button. Click the Configuration tab.

  6. Edit the IP address, Subnet Mask, and Gateway as needed.
  7. Do not change any other fields.
  8. Scroll to the bottom and click Apply. Click OK.
  9. Close Internet Explorer.
  10. Restart the Printer. Print the Configuration page to see if number was set.
NOTE: If the above steps do not allow you to assign the IP address via the Wizard, you will need to do it through at the printer itself.
  1. Go to this HP Support Page.

    Configuring TCP/IP through the Front Control Panel

  2. Click the link to your printer model. Highlight these steps.
  3. From the File menu choose Print. In the Page Range section, click Selection. Click Print.

    Note: For the complete printer user guide, go to the HP Printers Support & Troubleshooting page. Locate your specific printer type and model. On its home page, under self-help resources, click the manuals link. Download the printer's User Guide (not the Getting Started Guide). Look for steps to manually configure TCP/IP parameters from the printer control panel.

  4. Follow the steps from the printout to assign the desired IP Address to the printer.

    IP address will be entered at the IP BYTE prompt
    Subnet mask is entered at SM BYTE prompt
    Gateway address is entered at GW BYTE prompt

    Note: The syslog server IP address (LG BYTE 1=) and timeout (TIMEOUT=) do not need configured.

  5. Once the IP Address is entered, restart the Printer. Print the Configuration page to see if number was set.

Hope this helps

Chris (ziraffa)

Jan 09, 2009 | HP LaserJet 2840 Printer

1 Answer

Change passport


Are you talking about it asking for a Network Key or are you trying to login to the web interface of the router to configure it?

At any rate, if it's a network key you're looking for and you do not remember it I would connect your laptop to the router using a network cable and log into the web interface to reconfigure the key. All you need is the IP Address of the router which you can find by going to a command prompt (START MENU | RUN | Type CMD | Click OK) and typing IPCONFIG. Hit Enter and you will find the "DEFAULT GATEWAY". This IP Address is the address fo the router.

Put the ip address in your address bar in internet explorer or whatever browser you use. Log into the router. If you never created a password the default for most LINKSYS routers is a blank username and admin as the password.

You can go to the wireless security section and change the security key.

Hope this helps.

MO

Jul 18, 2008 | Linksys Wireless-G Broadband Router

Not finding what you are looking for?
Motorola PTP 600 Series Lite, 5.8 GHz 150Mbps, Integrated Antenna, Full Hop, NLOS (BP5830BH15-2AA) Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a Motorola Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...