Question about Computers & Internet

1 Answer

Information and help

Hi

I have a packard bell desktop and i have a problem i need to sort out. The model of my computer is VOL-CO2.

I recently wiped my computer clean and i deleted my sound driver and devices, now i have no sound on my computer.

I went on the packard bell website to download the devices i need for the sound but its coming up as a fault.

When i download it and try to open it the following message appears: Invalid floating point operation.

Could you perhaps tell me why it does that.

The driver i need is stac97n_613109010.

Kind Regards

R Davids

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 103 Answers

It sounds like you have just recently installed a fresh copy of windows, I would suggest reinstalling again. If not, you can try re-downloading your driver from another location. (My link)

http://www.soundcard-drivers.com/drivers/192/192171.htm

This is a software error message that can be interpreted as such or it can show potential hardware problems. Were you getting a lot of strange errors prior to reinstalling windows? It could be a problem with your math co-processor, memory, hard drive or even low voltages on your power supply. This one may take a bit of work. Good luck

Posted on Apr 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Packard bell 6700 outer cover removal


I would suggest going to the Packard Bell Support web site then select your country followed by selecting your model of computer which will then give you access to any available documentation to help you with upgrading memory etc.

Jan 12, 2012 | Packard Bell iMedia 6826 (P481000502) PC...

1 Answer

I have a Packard Bell Imedia desktop not sure of the model. It was working fine until recently, I switched on my pc and after the boot screen "NTLDR is missing Alt Ctrl Del" message appeared....


Remove the hard disk and attach it to an USB hard drive adapter and then connect it into the USB port of a working computer. This computer will detect the hard drive as an external storage device, then you can open the various folders and files to copy your files to this computer or burn your data to a CD/DVD disc or USB flash drive.
Return you hard disk back to your Packard Bell so you can reinstall Windows.

Aug 10, 2011 | Packard Bell iMedia 6826 (P481000502) PC...

1 Answer

Hi can you tell me where i can find the sound driver for this computer, i use to find them on the packard bell web site but its all changed now,


If you were to log on to the manufacturer's web site, I think you will be pleasantly surprised as usually one is able to download, by model number, Customer Instruction Manuals, list of Dealers for spare part supplies and Driver downloads as required.

Just Google the manufacturer's name and follow the links. Make certain you are directed to the manufacturer's web site as some search engines direct you to other sites and they charge for the information that is normally free of charge.

I hope this helps.

Dec 21, 2010 | Packard Bell iMedia SL 9553 (P660401806)...

1 Answer

I would like to download driver vga. Computer modele Packard Bell, but it not have it. Please tell me, thanks


Try looking up the model # for the diplay its self then goto the manufacture website for the display drivers. You should find the make and model # for the display in "systen information" click start goto "all programs" "accessories" "sysem tools" then "system information" GL hope this helps.

Jun 20, 2009 | Packard Bell iMedia SL 9553 (P660401806)...

1 Answer

I recently connected a Packard Bell 1020 monitor with mounted speakers to my Compaq 85000 tower. I had external speakers that worked prior to this, and I cannot get the packard bell mounted speakers to...


You need a driver for your Compaq's audio card. You can input the exact model number at the site linked below to retrieve the one you need.

http://welcome.hp.com/country/us/en/support.html

Apr 19, 2009 | Compaq Presario 5000 PC Desktop

1 Answer

Computer keeps rebooting.


Hi there, maybe I can help.
As your computer boots hit F8, go to the startup menu and disable "automatic restart on system failure". Boot up and make not of any error messages.

Let me know if this helps

Jan 03, 2009 | Computers & Internet

1 Answer

Computer Model: UTOW-SAN. Serial No. 048800220095 I purchased this computer several years ago and registered it immediately. I have recently had occasion to reformat it using the recovery disc you...


Fixya is not and never has been a representative for Packard Bell, Dell, HP, Sony, Gateway, or any other computer OEM or accessory hardware manufacturer. What we are is a site to where computer users can come to get some degree of professional help regarding various computer issues. The more information provided by the customer, the more likely we can be of some help. Your problem referring to a Packard Bell Imedia 1308 might be best answered on the Packard Bell site here. It would be my wish that questions that might deal with warrenty issues and manufacturer OEM issues be properly handled by the OEM in question. And there is NO doubt in my mind that Fixya has never provided a recovery disk for your or anyone's model computer. What we can do sometimes depending on our experience levels with various computers is provide information that might help someone create their own recovery disk from software that comes installed from the OEM factory on their computers. For example, my Sony Vaio has recovery software that creates factory default recovery DVDs, and Fixya has no legitimate and probably no legal reason to be providing such information. So please refer to your OEM manufacturer or the vendor who sold you the computer for these kinds of questions.

Aug 12, 2008 | Packard Bell Computers & Internet

1 Answer

I need to open up my packard bell Ixtreme computer to insert memory .. how do I do it


Hi,

Most documentation for a Packard Bell iXtreme would be here. To upgrade, repair or replace your memory, this document could detail the steps involve including opening the case.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jun 27, 2008 | Packard Bell Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

983 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98765 Answers

David Payne
David Payne

Level 3 Expert

14065 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...