Question about Bosch Nexxt Premium WFMC6400UC Front Load Washer

1 Answer

I can not get the door open after it finished washing. Is there a secret to it?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Bosch Master
  • 2,605 Answers

Hi, welcome to fixya. Whether there IS a problem or not remains to be seen, sometimes unplugging the unit for a minimum of three minutes will reset the control. A lot of times this occurs do to improper draining which can be caused by many things but I'd suggest manually unlocking it first and then reset it with the door open. The emergency latch release is behind the small round panel below the main tub door. **Unplug the washer or turn off the breaker before attempting any suggestion given here please** To open the access door ( small round panel ) you'll require a small round needle shaped object or really narrow screwdriver. Put it in the small hole in the panel push in slightly and turn to about 6 o'clock...clockwise that is The small round cover should now come off and expose the pump with the string going through a hook on the pump housing. Be very careful as the edges are very sharp. A string will be threaded through the pump housing and you just need to pull it to open the main door. Let me know how you make out and also if you require further assistance with this problem. If you don't require further assistance and this indeed was helpful to you, please allow a moment to rate this solution I've given accordingly. Thank you for visiting "fixya" today and good luck. Macmarkus :)

Posted on Aug 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red light will not go out so I cannot open the door


Generally machine take time approx 5 minit to open automatically open the door if not open please check door switch or pcb

Aug 07, 2016 | Washing Machines

1 Answer

Zanussi washing machine FA 621-622 or FA 626-674. I cannot open the door after the wash programme has finished


make sure the wash prog has really finishe, & try to cut electricity before you open the door

Jul 02, 2011 | Zanussi Washing Machines

1 Answer

EUROLEC Model WM002 Washing Machine How do I open the door after it completes a wash?


im hoping you solved the mystery and would be kind enough to tell me ,how the door opens , moved into a new house with that machine insitu, i cannot get the door open have wet washing inside since yesterday, i would appreciate if you would let me know the secret.

Dec 30, 2010 | Washing Machines

2 Answers

My Electrolux ewf1090 front loader door wont open


Turn the power off and leave for 5-10 minutes then turn on. This should release the door lock the problem could be the pump drain filter is blocked clean this and it should resolve future problems.

Apr 25, 2010 | Electrolux Washing Machines

1 Answer

Indesit wd 125. Wash cycle had finished, door lock was off but


Unplug machine, take lid off and locate the door lock. You will have to use a small screwdriver or something to release the lock. Then replace your door handle.

Jan 19, 2010 | Washing Machines

1 Answer

The wash is finished but the door will not open?


You door switch is most likely faulty.

Open the drain filter door in the bottom corner of the machine. See if you can locate a lever or ring to pull down. This will manually release the door.

Regards
Ash

Oct 21, 2009 | Miele Washing Machines

1 Answer

Door will not open on my WM1480FHD after wash


Hi ii_goldie,What about the RINSE cycle... maybe the washer knows the "full cycle" is NOT finished.

The washer will display DONE... and make the door available to you. If not the cycle may not be finished. OR, turn it off, however, DON'T open the door if your machine has not drained all the water out, allow the system to finish.

Aug 19, 2009 | LG Washing Machines

2 Answers

Can not open the door after cycle is finished


i think you are talking about a front loading machine, have you waited for at least 3 mins before opening the door?

these types of washing machines locks the door in order to run. but after a cycle is finished, the door would not open right away, there is a delay on opening the door.

let me know what happened,

tnx 4 using fixya,

drcool

Sep 19, 2008 | Washing Machines

1 Answer

A problem with my Bosch washing machine


It usually takes 2 minutes after the wash to open the door; do not force the door. Doesn't matter if the active light is on. Just try.

Oct 05, 2007 | Washing Machines

Not finding what you are looking for?
Bosch Nexxt Premium WFMC6400UC Front Load Washer Logo

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...