Question about Philips J44414

2 Answers

SUNBED IS SPARKING AND FLASHING - Philips J44414

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a new camera philips sic4700/37 but is'nt compatible wuith mi pc and i nedd download the driver for internet how i can ?

Posted on Apr 23, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 2,130 Answers

1st You download Webcam Driver.
Driver After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Posted on Dec 24, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ergoline sunbed, Sunbed lights keep going on and off while it's on cycle, it trips and the goes back on immediately does any one know what could be wrong?


Check your power supply rating of the circuit breaker that is feeding the outlet. The safety relay on the sunbed may be triggering because your circuit breaker won't allow enough current to flow to the sunbed. (The safety relay is far faster in actuating that the circuit breaker is to pop when drawing too much power.) Check the owner's manual and it will probably tell you you need a dedicated 16Amp circuit for the sunbed. These means the wiring has to be of proper diameter (gauge thickness) to handle the current. It shuts off and allows the sensor to cool down and then cuts on again... repeatedly. Also check the polarity of the outlet and ensure they match with the plug-in jack. (Often electrician's put the black wire and red wires on wrong poles inside the wall socket.. turn off the circuit breaker for the socket before changing them using an electrician's screwdriver with lamp inside the handle to assure the power is off first, please and make sure the green (ground) wire is connected also.)

Apr 24, 2015 | Health & Beauty

1 Answer

How do you do the lectrical wiring for a upright sunbed


Doesn't it just plug into an outlet? You should have an RCD already if you are going to install a sunbed.
If not or if you don't have an earth leakage breaker on your supply then call a qualified electrical contractor who will need to install a RCD for safety reasons I.e preventing death by electric shock.

Jun 17, 2014 | Cameras

1 Answer

The plug lead is getting very hot on my sunbed.why


can you tell me why the plug to my sunbed is red hot i darnt use is what is the problem

Mar 26, 2013 | Cars & Trucks

1 Answer

Is there are connection with sunbeds and cataracts?


Yes, there is evidence that sunbed use can cause damage to the eyes and the UV rays can lead to cataracts developing.

Feb 18, 2013 | Health & Beauty

1 Answer

Are there any tips you can give me for tanning bed safety?


Make sure you use a salon with trained staff. They should have a good knowledge of sunbed safety, timings, skin types etc.

Also make sure that you don't exceed the recommended time on the sunbed.

Protect your eyes from exposure as they can be easily damaged.

Feb 18, 2013 | Health & Beauty

1 Answer

UWE Speedfire Sunbed Turns Down


your problems is the hand controller is faulty had the same problem with a bed the other week replaced the hand controller and the problem was cured

Jun 01, 2009 | Office Equipment & Supplies

1 Answer

Flashing/sparking of image


no doubt. replace LOT and horizontal output transformer with new one

Jan 26, 2008 | Sony FD Trinitron WEGA KV-34HS420 34" TV

2 Answers

3 phase sunbed


Gonna be an expensive little endevor. Gotta use a rotophase to adapt 3 phase to single phase. Need a qualified electrician to do this. Better check with an electrician if this is feasable to do.

Dec 13, 2007 | Xerox Phaser 6100/BD Laser Printer

Not finding what you are looking for?
Philips J44414 Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Computers & Internet Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

micky dee

Level 3 Expert

2644 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...