Question about Audio Players & Recorders

1 Answer

Battery for pyramid 105

I can't locate a small rechargable battery pack with the correct plug for the pyramid 105 amplifier. any ideas? thanks

Posted by on

  • prah Apr 27, 2008

    The specs for the Pyramid 105 amp says that it uses a 12 volt 4 amp battery. _ I need one that is compact & rechargeable.
    thanks

  • Graeme Ross
    Graeme Ross May 11, 2010

    Hi prah

    Do you have a picture of the battery? And any ratings that may be on it?

    regards
    Graeme

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,512 Answers

If you are able to give some information about the battery, i can tel you where to get it. They are generally available. :)

Posted on Apr 25, 2008

  • Graeme Ross
    Graeme Ross Apr 28, 2008

    Hi again, thanks for your reply... is this your amplifier? I had trouble finding a pyramid 105 exactly....If it is this model , is the battery a backup for power outages?? Oh and can you describe the plug it has... A picture would be the best?

    regards
    Graeme

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fan is to loud


It might need the fan plugged in to make a full curcit and that's why it won't turn on

Mar 28, 2013 | Pyramid XPA-100 Amplifier

1 Answer

I have a Pyramid PS-52kx. I need to know the value of R13 on the controller board, and cross-reference for TYN416


I HAVE A PYRAMID PS-52KX I NEED TO KNOW THE R13 RESISTOR OHMS AN TOLARENCE AND WATT.

Mar 07, 2011 | Pyramid PS52K Amplifier

1 Answer

My crown 602 xls tripped a breaker, I reset breaker regained power to receptacle , I lost power to the amp no led's come on front when i pushed the small reset button on the back I still did not regain...


They use a breaker instead of a fuse.

http://www.retrevo.com/support/Crown-XLS-602-Amps-manual/id/19050ci763/t/2/

CONDITION: No

power to the amplifier.

POSSIBLE REASON:

• The amplifier's Power switch is off.

• The amplifier is not plugged into the power receptacle.

• The amplifier's high-voltage power supply circuit breaker has tripped. Verify that the AC mains

voltage is correct, then press the Circuit Breaker button on the back panel.


Take it to the ER.

Jan 12, 2011 | Crown XLS 602 2-Channel Amplifier

1 Answer

Is there a ground peg on the back of the pyramid pr2500 preamp?


According to this listing I found on eBay it will work for you.

PYRAMID Stereo Control Pre-Amplifiers
PR2500

* Power On/Off Switch w/LED Indicator * Microphone Input Jack * Microphone Level Control * Bass/Midrange/Treble/Loudness/Balance Control * Master Volume Control * High/Low Frequency Filter * Stereo/Mono Switch * Muting Switch * Input Source Selector * Tuner/CD/Aux/Phono Input RCA Jacks * Tape Monitor Switch * 110/220 Voltage Switchable * Rack Mount Design * Dimensions: 19''W x 2.375''H x 8.5''DAs far as grounding the TT, if you must, just use any screw on the preamp chassis.

May 17, 2010 | Pyramid PR2500 Amplifier

1 Answer

How to hook up a pyramid pro plus 4 channel pb-180px without using rca jacks for 6 by 9s


The pb180 has High Input receptacles on the back end. They are marked High Input and identified as Channels 1&2 left/right, and channels 3&4 left/right. You will need to identify all speaker wires coming from your head unit ( left front +&--) , and so on. You will be sending the speaker wires from the head unit to the pb180's High Inputs. In other words, the front left speaker wires(+&-) from the head unit will go to the High Input Channels 1&2 side, left input of the pb180, and so on, so the speaker wires coming out of the head unit will need to be cut. And LABEL all sets of speaker wires before you cut them! Then on the OUTPUT end of the pb180, you will be sending the wires back to the the respective speaker wires which are going to the speakers. So it's out from head unit to pb180 and out from pb180 to speakers.
Hopefully you have the plugs that Pyramid uses for the speaker wire inputs to the amp. If not you have to get creative, and make up terminals to fit into the input receptacles. Maybe a wire terminal from Radio shack will fit those pins..
Also, if you go on line: Google search "Pyramid auto amps" and click on "SEARCH" (upper right hand) of their Web Page. Plug in your model number like this, pb180, and you'll be able to download the manual for this amp. The manual has a full description of the wiring options.

Hope this was helpful and Good Luck!

Jul 27, 2009 | Pyramid Audio Players & Recorders

2 Answers

Battery for pyramid 105 amp


There are many many possible batteries you can use for this application, from lead acid to Lithium polymer. You will need to determine what type of power connector that will fit your unit's jack then make sure the polarity is correct. You can then wire connector
accordingly to battery you select. Make sure battery exceeds current requirements but voltage. If unit has internal charger, make sure the battery you choose is compatible or use dedicated charger

Apr 27, 2008 | Audio Players & Recorders

4 Answers

Luxman LV 105 Amplifier gone dumb


Hi: If the Amp has an audio output transformer, check for bad solder connections to the pc board, This are the wires from the transformer to the PC board. Another place to look is the earphone connection plug. If the jack has a bent contact inside of it, you will have all sound cut off. Good Luck.

Al

Mar 09, 2008 | Carver PM950 Amplifier

2 Answers

Schematic Drawing


I can't seem to find a free one anyplace and that includes web searches, library of congress, etc. I would suggest contacting Pyramid:

www.pyramidcaraudio.com-there is no support at the site...

Pyramid Car Audio
1600 63rd. Street
Brooklyn N.Y. 11204
1-800-444-5671
Local (718) 535-1800
Fax (718) 236-2400
support@pyramidcaraudio.com

Sorry could not be of more help...
Jeff

Jan 22, 2008 | Audio Players & Recorders

1 Answer

Humming noise


Make shure your wall socket is grounded.Pull cover and look for black and wite and green wires on the back of the plug.Also may have leaking capacitors in final output stage may need a repair man look at the directory on this site.

Nov 17, 2007 | Pyramid XPA200 Amplifier

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

98868 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69845 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...