Question about D-Link RangeBooster G WBR-2310 Wireless Router (WBR2310)

1 Answer

Dlink router when ever i hook up my dsl to my d-link router model 2310 my internet wont work i think i messed up my setup how do i fix my setup back

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 102 Answers

What is your connection to the dlink router look like, plz define. If you think your connection settings are fine then try resetting (do this if you do not care about the settings on the router) the router to default settings by depressing the small hole at the back of router for few seconds and it will refresh the router to default settings. Try connecting now to an ethernet cable and it should work if not then you have to go into router settings and match the ISP provided settings for modem to work in the router configuration. For going into the router make sure you have the manual for it:
http://www.dlink.com/products/support.asp?pid=478&sec=0
select the model and download the manual as well as any firmware.
Hope that helped

Posted on Apr 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I lost the setup disc for my D-link wbr-2310 wirless router can i download it somewhere?


go to this website
http://www.dlink.com/products/?pid=WBR-2310
pick either wbr or wbr rev that you own.
then go to support resources and click on additional downloads.
you will see a link to the setup file for your specific router model

May 01, 2011 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

I have a dlink dir628 router and can not get internet access but can find the access point i got throught the config. but can not get internet through the router wired or wireless but hooked up my old...


if you have one dsl modem & one router means you have to cofig dsl modem in bridge mode and router in dynamic mode.if you have any dout call me 9740575949

Feb 25, 2010 | Routers

1 Answer

Internet connection fails through DLink router


Some ISPs (Internet Service Providers) require that you "register" the 'MAC' (not an Apple --> Media Acquisition Control) address of the network-adapter of your computer (or router) with the ISP,
before the ISP will allow your computer (or router) to be provisioned.

Your router has a different MAC-address than your computer.
So, your computer works with its "registered" MAC-address,
but your router cannot connect with its "unregistered" MAC-address.

Access the web-server inside the router, and click the 'Clone MAC-address' button, and restart the router.

Then, the router will send the MAC-address of your computer, rather than its own MAC-address, to your ISP.

Dec 31, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

Wbr-2310 error 112


Check your physical connection first. From the modem, it should be connected to the router's Internet port, then your computer must be connected to port 1 on the back of the router. Then do a power cycle, no need to run the setup CD. If it doesn't work, you need to manually configure the router. You may need assistance from D-Link tech support. Call their toll free number

Jun 20, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

WBR-2310 only connects to internet wired to pc nothing else


hi ! the router has a built-in firewall. you just need the port numbers for your devices (from your device manufacturer) and open them inside the router.
you can ask assistance from dlink tech support at 877-453-5465. just an advise on how to handle the call when you reach dlink tech support (agent); do not agree to call back after you troubleshoot with them (they'll be giving you a case id reference# and be advising you to check your pc or call "who" and call them back to continue the troubleshooting). insist to the agent that he need to resolve the problem asap (by the way, agents are not allowed to drop the call or they'll be dead-history!). and if the agent still insisted you to call back, ask for a "senior level technician" to finish the job (escalate the problem).
fyi: dlink tech support handling time to resolve a call is 15 to 18 minutes only. if you reach that 15-18 minutes (max) time the agent will think of a way for you to call back (advising you to check with your pc manufacturer, check with your ISP, call microsoft to update your software, etc... non-sense!) they need to do this in order to reach their handling time (agents need to reach 21 to 25 billable calls, and billable calls are "solution provided", "resolved", and "dropped call"). ---- believe me, i was one of them and repented ....

Feb 21, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

Dlink hooked up but modem acting like router


I did that once, left it like that for about 3 months till I was bored and decided to mess with it. I then remembered It had a Reset button. Press that and everything should be back to narmal.

Feb 01, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

2 Answers

Unable to access DLink WBR 2310 Configuration page


At the back of the router is a tiny pinhole. Using a pen try to press it for 15 secs and try to access the page using the 192.168.0.1

Jan 02, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

2 Answers

D Link model 2310


When you connected your PC directly to the modem, were you able to get the internet working automatically or did you have to run a dialup-like connection?

If it worked automatically, try this:
1. Connect a PC to a numbered port of the Dlink router (don't connect the modem to the router nor the PC)
2. Open Internet Explorer and enter http://192.168.0.1 on the address bar. This should then ask you to login. (restart the router and the PC if nothing happened then try again)
3. Enter admin for the username and blank for the password
4. Once you're on the Dlink Setup page, click on Network Settings on the left panel.
5. Change the Router IP address to 192.168.2.1 then hit Save Settings
6. Now, connect a cable from the Speedstream modem to the WAN port of the Dlink router then check if your internet is working from the wired PC.

If its still not working, turn off the modem and the router and then power the modem first (wait for the lights to be stable) then plug the router.

Hope this works for you. Goodluck!


Nov 07, 2008 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

When ever i hook my dsl to my router the internet wont work i think i acciendently messed up my setup


Unplug the router, then perform a reset on it (hold the reset button down, possibly a pinhole button). That will reset the settings to default and you can reconfigure it.

Apr 23, 2008 | D-Link RangeBooster G WBR-2310 Wireless...

Not finding what you are looking for?
D-Link RangeBooster G  WBR-2310 Wireless Router (WBR2310) Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a D-Link Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...