Question about Dell UltraSharp 1907FP 19" LCD Monitor

1 Answer

Dell FP1905FP Stopped working

I have a Dell 1905fp connected (DVI) to an IBM ThinkPad T42 (in docking station). The connection has worked flawlessly for over two years. Starting last week the monitor would not sync with the T42 - at first the on button would blink (green) but no connection, then after a period of time, would connect. Now the button will still blick, but the connection is never made.

If I try to boot the T42 in the docking station with the monitor on, neither the LCD on the laptop or the monitor has any display .. I have to boot without the docking station, then place it back in the station once on.

Also, the self check on the monitor was working but does not seem to be working anymore.

Can this be fixed by swaping a board inside the monitor?

Thanks for any assistance you can provide.

Posted by on

  • Rbeau Apr 23, 2008

    Thanks ... this one has an internal power supply. Do you know how to get access to the supply in the monitor? Thanks!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 186 Answers

First try on another computer just to see if there is any other problem then the LCD. Also check power supply to the monitor. I believe this has one that's internal, but if external, swap with a similar specs one. If internal, check to see if any popped up capacitors. Video boards are most likely ok.

Posted on Apr 23, 2008

  • Scott
    Scott Apr 24, 2008

    If you remove the screws on the back, the cover should pop off. From there is will be a unit directly attached to where the plugin attaches. There you can check for any popped caps.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have CMV 946D Monitor and i am trying to connect it to my laptop via DVI cable and it doesn't work. my laptop is already connect to another monitor using VGA cable. do i need any driver or does DVI...


Sorry, but you can use only one port at a time, not both, It is either DVI or VGA. If you want to drive two monitors, you need to lok for docking station with dual video card.

Apr 28, 2011 | Chi Mei Corporation CMV-946D/A Monitor

1 Answer

1905FP stuck in PowerSave mode. I'm using as a secondary monitor to my laptop, but won't activate when I send an application to that monitor. Everything worked properly until a few days ago, but I haven't...


Try to connect the monitor to a working PC.
If there is no problem, then you may try your laptop with a working monitor.
If you having same problem may be you should review the process for outputting display from your laptop.

Mar 15, 2010 | Dell UltraSharp 1905FP 19" LCD Monitor

1 Answer

Syncmaster 2333- connected fine to laptop on docking station for 3 months. Then all of a suddent it is causing my laptop to crash. laptop works on its own. Connected, the monitor shows my encryption...


Disconnect the monitor from the docking station and plug it directly in the laptop connector. If all is well it might be the docking station. I had one crash a computer and had to rebuild the operating system to make it work again.

Mar 09, 2010 | Samsung SyncMaster 2233BW 22" LCD Monitor

1 Answer

Can you set up two Dell E172FP 17" flat panel LCD monitors with an latitude D630 docking station?


Yes, but you will need a dvi to vga adapter.
Or one of the monitor must have a dvi input.

Mar 09, 2010 | Dell E172FP 17" LCD Flat Panel Monitor

1 Answer

With Windows XP and Dell Latitude docking station, Dell 2001fp set to DVI, goes to Power Save mode and no display. It works fine with VGA input. It had been working fine for ~2 years.


Update Bios & Video Driver Also right click on my computer,go to properties,go under hardware,you can see hardware profiles,delete the dock profile (while the system is off the dock) & then dock & restart

Jan 08, 2010 | Dell UltraSharp 2001FP 20.1" LCD Monitor

1 Answer

Dell 1907fp picture "shifts up"


It is most likely the cable, it is where most faults of this ilk lie in LCD monitors. :-)

Mar 27, 2008 | Dell UltraSharp 1907FP 19" LCD Monitor

2 Answers

Out of focus/fuzzy


Your screen refresh rate may be too high for the monitor or one of the parts might be incompatible with windows try lowering your screen refresh rate. Or checking windows for a compatible driver for the chip or monitor.

Feb 09, 2007 | Sony DELUXEPRO SDM-X82 18.1" LCD Monitor

Not finding what you are looking for?
Dell UltraSharp 1907FP 19" LCD Monitor Logo

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18331 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...