Question about Logitech QuickCam Chat Personal Web Camera

1 Answer

Focus issues The video is out of focus and when I turn the nob it won't go into focus. I suspect it's a hardware issue but is there anything related to software that might be causing the problem?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Hello Leota,

THIS article from the Logitech website should prove useful..Alos make sure you have the latest driver for your camera. Click HERE to find out which is the correct version of QuickCam software for your camera.

Should you have any further questions, please feel free to post them here.

P.S. Before you assign a rating, please make sure that the issue is resolved or you are satisfied. If not, please post back as to what you did, and/or any other questions you may have, and I will try to assist you as best I can. Please do not assign an ‘Inappropriate’ or ‘Thanks for trying’ rating if your issue is not resolved after the first response itself, as sometimes a bit of to and fro dialogue may be necessary before we can find a fix or an answer to your query.

If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! or Helpful rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid

Enjoy free holidays, meals, haircuts and more, with mystery shopping!! USA / UK
FREE SOFTWARE GIVEAWAY
Windows Utilities

Posted on Apr 24, 2008

  • Swilin Sampson
    Swilin Sampson May 03, 2008

    Hi,




    Just wanted to inquire if your issue is resolved, or if there is anything
    further I can do to assist you…





    If you find that the solution/answer I provided led you
    to, or resulted in a fix, please take a moment to close the ticket with a FixYa!
    rating under my solution.
    I would be very grateful for your show of appreciation.





    Should you have any further questions, please feel free to
    post them here.





    Thank you for using FIXYA!





    Cheers!


    IrishDruid

  • Swilin Sampson
    Swilin Sampson May 31, 2008

    Hi,




    Just wanted to inquire if your issue is resolved, or if there is anything
    further I can do to assist you…





    P.S. -You can rate this solution with one of
    four votes, if you feel your issue is resolved.






    • "FixYa!"
      - The solution provides great advice on how to solve the problem.
      (Positive Rating)

    • "Helpful"
      - The solution provides useful leads that helps solve the problem.
      (Positive Rating)

    • "Thanks
      for Trying
      " - The solution does not solve the problem but the
      effort is appreciated. (Negative Rating)

    • "Inappropriate"
      - The solution has absolutely nothing to do with the problem.
      (Negative
      Rating)


    If your issue is not still not resolved, do not
    assign a rating just yet. Please post back as to what steps you took, results,
    etc, and I will try to assist you further as best I can.






    Thank you for using FIXYA!





    IrishDruid




×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Air Conditioning problems.


Fan motors in cars fail commonly. They wear out the brushes and the motor stops or the fuse blows. The other issue with the mode selector may not have anything to do with the motor. The actuator on the mode selector can become stuck or broken and then the air delivery wont go to the right area. All these things should be visible under the dash or behind the glovebox.

Jan 14, 2016 | 2006 Ford Focus ZX4

2 Answers

Automatic ford focus 51 plate drinking fuel


you need to have the check engine light repaired first most likely related to heat and or gas issue and a check engine light is not a 1 issue thing code will need to be pulled if you have a autozone they can pull it for free and theres where we need to start .could be anything from o2 sensor to a thermostat ect...

Feb 18, 2013 | 2001 Ford Focus

1 Answer

Cam loses focus on Skype


I have the same exact issue - however, it appeared. In order to understand whether it is the driver/os issue I moved my camera to a different computer - from Windows desktop to Mac laptop. And the issue still PERSISTS. I did not have the same problem in the past few months where I used the exact same setup and the same camera. Thus, it can be that the camera went bad (unlikely) or a Skype issue (likely). I think it might be related to the peer connection re-evaluation that happens in the "~30 sec" interval

Jun 16, 2012 | Logitech C920 Hd Pro Webcam 1080p...

1 Answer

Car stutters/ hesitates


Well I am not a mechanic, but I am fairly handy with a wrench. My initial suspect would be some sort of transmission issue whether it be mechanical or sensor related.Is it more noticeable when accelerating slowly vs. a quick acceleration? That could mean a torque converter. When is the last time that you had the transmission fluid changed? A good shop should be able to rule out many issues by looking at the fluid that comes out (looking for metal shavings and the like). Taking your car to a transmission specialist may be your next viable option. Hope this helps

Mar 19, 2012 | 2003 Ford Focus

1 Answer

My camera can't focus when i press halfway down to focus before i press all the way down to snap the photo. it is only a problem with my 18-55mm lens. all my other lenses focus and take photos...


First off, try gently turning the focus ring on your lens while it is on auto focus mode (DO NOT force it). Sometimes a minor bump on the lens can cause the focus ring to come off the tracks. Try that and see if the lens start auto focusing again. I find that this solves the issues a lot of the time. If that doesn't give you any results then you'll need to take your lens to an authorized Canon service center for repairs. Hope this helps!

Hiram
Photo Tech Repair Service
110 East 13th Street
New York, NY 10003
212-673-8400

Jul 06, 2011 | Canon EOS 7D Digital Camera with 1855mm...

1 Answer

The display on my hp laptop has become blurred and out of focus, i have adjusted the settings on the "personalise" option but it remains blurred. Is there anything I can do about this?


Good Morning.

This could be a hardware issue, releated to Video card of the Laptop.
Please try updating the BIOS of the Laptop, this may fix the issue, if still the issue persists, then this a hardware issue. Could be with LCD display or video card.

To update the bios, please refer the link below.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01056794&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN

This should fix the issue.

Jul 06, 2011 | Computers & Internet

1 Answer

2000 focus se heater fan is running all the time


try to pull the nob off and see if you can turn it off with some pliers the nobs like to strip does it stay one when the car is off?

Jun 23, 2009 | 2000 Ford Focus

1 Answer

Focus Issues! Help!


I found the answer on another thread in this site. You just need to lightly bang the camera with your hand and it gets back in focus. Pathetic and archaic, but effective. I used the two finger method like I was hitting a cigarette pack.

Apr 29, 2009 | Sony Cyber-shot DSC-W100 Digital Camera

2 Answers

2000 focus sputters and loses power


There is a recall on the fuel pump. If your car is sputtering and losing power, it is probably a fuel issue and I would suspect the fuel pump. It is a recall so the dealer has to replace it for free.

Mar 21, 2009 | 2000 Ford Focus

1 Answer

Focus issues


Scotty, this model has had issues with the focus stepper motor in the lens. I would call Sony customer service and ask them if there has been a service advisory issued for this model that addresses the slow focus issue.
Good Luck to you.

J. Weibel
CustomElectronics.Org

Dec 14, 2007 | Sony DCR-DVD301 DVD Camcorder

Not finding what you are looking for?
Logitech QuickCam Chat Personal Web Camera Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2642 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18377 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...