Phone stuck in wlan and cant dial out

this is so obvious.
the Chinese phones aren't IOS !
they use java and you can not install the apps.
they just look like Iphones.

Please try this and let me know if it works.

1. Change to flightmode.
   
2. Then power off the device.
3. Restart it and change to normal mode.

Also do a factory reset. The default passcode is 1122.

access point is a code of wi fi without it u cant to wi fi. some its shows connect but its connected its not only in mobile,but shows in pc also. its just because of internal settings. if u want to check ur mobile then u should go a place where wi fi is working like college etc. and u should know the code of wi fi. then set ur settings with code. good luck.

Hello,

test the phone with another battery and if it does not power on, let me know so that I can direct you further.

Take care.

here is the proper settings
follow link and instruction
http://www.youtube.com/watch?v=og0bgJCeC1k

Guys I had the same problem with the k599 Sciphone and none of the solutions found on the internet helped me. New chinese models tend to restart after testing is over and this results in turning the wifi application on. So I spent many hours on thinking how to bypass this function and this morning I woke up with an idea that really worked!! The steps are quite similar with the ones followed to debug older models:

put 2 chips on cell
Disable WLAN.
1-enter in factory mode *#3646633#
2-go to RF Test Tool
3-choose GSM, confirm OK!
4-go to Power scan
5-Select Band DCS1800 click OK
6-the cell frozen
7-wait for 3 minutes testing
8-while testing connect to a pc using the USB cable (do NOT select ANY of the options appearing on the cell screen)
9-Click the CENTER button of the cell until you go back to principal menu
10-go to settings/network settings and choose GSM Preferred or any other option (except WLAN only!!)

In this way the cell does not reboot, and the wifi application stays off, so the option can now be changed...

Hope this helps!

Greetings from Greece!

e-mail me to [email protected] if any questions..

Guys I had the same problem with the k599 Sciphone and none of the solutions found on the internet helped me. New chinese models tend to restart after testing is over and this results in turning the wifi application on. So I spent many hours on thinking how to bypass this function and this morning I woke up with an idea that really worked!! The steps are quite similar with the ones followed to debug older models:

put 2 chips on cell
Disable WLAN.
1-enter in factory mode *#3646633#
2-go to RF Test Tool
3-choose GSM, confirm OK!
4-go to Power scan
5-Select Band DCS1800 click OK
6-the cell frozen
7-wait for 3 minutes testing
8-while testing connect to a pc using the USB cable (do NOT select ANY of the options appearing on the cell screen)
9-Click the CENTER button of the cell until you go back to principal menu
10-go to settings/network settings and choose GSM Preferred or any other option (except WLAN only!!)

In this way the cell does not reboot, and the wifi application stays off, so the option can now be changed...

Hope this helps!

Greetings from Greece!

email me to [email protected] if any questions

Try to reinstall a jailbroken version of the iPhone OS.
Do not (ever) use reset to factory if you need the device to be jailbroken to function (e.g. in case you are using an officially unsupported operator/plan)

• http://support.apple.com/kb/HT2371

try to reset your device once to factory setting. switch off your phone first than hold power and home button for 10 seconds.