Question about Zanussi ZWF1430W Front Load Washer

1 Answer

Zanussi washing machine wont spin

I have a Zanussi Aquacycle washing machine and the drum wont turn during the wash cycle, I can manually go in and turn drum both ways but when on programme it makes the spinning noises but doesnt do anything, not sure if its filling up with water either now...Help

Posted by on

  • 2 more comments 
  • Anonymous Mar 21, 2014

    drum rotates fine,but on spin drum does not turn and rattle noise at back of drum,Found what looks like a very thin belt broken on floor of machine.How do you get to belt to inspect it

  • Anonymous Mar 26, 2014

    washing machine fills with water but drum wont turn to wash or spin

  • Anonymous Mar 28, 2014

    the washing machine drum fell down and unit turns off on its own when spinning

  • Anonymous Apr 01, 2014

    The centre part of my machine is only turning not the drum so it does not spin and now it doesnt want to wash

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 101 Answers

Check the drain hole when you start the machine if the water is coming back out , if yes that means your dump valve is bad.

Posted on Apr 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Access motor belt zanussi aquacycle 1000


There is usually a hatch at the back of the washing machine.

Mar 17, 2014 | Washing Machines

1 Answer

I have a Zanussi Aquacycle 1000. It is taking in water and draining but the drum does not rotate both during wash cycle and spin cycle. Urgent help needed as we have people staying from England and NO wash...


Hi.

If the machine is filling up, then cycling and draining, the problem is usually the belt. The belt is reached disassembling the appliance . If the belt is OK the problem is usually the motor or the motor control unit, which is a sealed electronic module connected to motor and to control board and located inside the washer. If the motor has volts and does not turn, then the motor must be replaced. In some less common case the control module itself may be responsible. Motor assembly and belt are located at the back of the drum and get accessed disassembling top and back of the washing machine.

If the machine does not go through the cycle, but it starts draining from start, then the problem is overfill detected. In that case check the drain system, the drain hose, the inlet valve and the pressure switch.

Regards.

Ginko

Aug 29, 2011 | Zanussi FJS1225W Front Load Washer

1 Answer

Need a free download user manual for a zanussi aquacycle 1200


You will need the model number to get an exact match, but there are 10 different aquacycle 1200 manuals you can download from here:
http://www.manualshark.org/s/zanussi+aquacycle+1200+washing+machine+instruction++manual/

Jun 28, 2011 | Zanussi Washing Machines

1 Answer

Drum wont turn on the spin cycle, it's ok on a


if its pumped all water out and wont spin sound like your motor brushes are worn.

Oct 16, 2009 | Zanussi ZWF1230W Front Load Washer

1 Answer

Zanussi Aquacycle Washing Machine wont spin?


Assuming its pumping out ok, sounds like motor brushes..if not pump clear filter..

Oct 06, 2009 | Zanussi ZWF1430W Front Load Washer

1 Answer

No spin & drum is very noisy during cycle ,like a jet engine


Sounds like the drum bearings have gone and the belts come off.
Im afraid this is an expensive repair and not a diy job.
Sorry to be the bearer of bad news.
thankyou for using Fixya.

Mar 15, 2009 | Washing Machines

1 Answer

Zanussi aquacycle 1200 smells coming from between the drum and casing.Suspect it is caused by a build up of slime etc.


1. Set the washing machine on the highest water level, temperature on hot and the wash cycle to normal.
2. Fill a gallon jug with hot tap water. Once the cycle begins, let it run for a minute or two, then stop the cycle, open the lid and slowly add the gallon of hot tap water. Don't overfill — you just want to raise the water level so that it is able to reach and clean the inside top rim.
3. Add 2 to 4 cups of household chlorine bleach and restart the cycle. In a couple of minutes, stop it again and just let it sit for at least 30 minutes. Afterward, let the cycle finish, and open the lid to air out the inside.

I got it from this link: http://answers.yahoo.com/question/index?qid=20060827101905AANuYg4
and here:
http://deseretnews.com/dn/view/0,1249,600124768,00.html

Jul 02, 2008 | Zanussi FJS1225W Front Load Washer

2 Answers

Zanussi aquacycle 1000 washing machine spin problem


this is possible due to a bearing collapse or bearing spider broken. this causes drum pulley to be out of line and the belt comes off

May 29, 2008 | Zanussi FJS1225W Front Load Washer

1 Answer

Zanussi aquacycle 1200


May be the Bearings.Open door and try moving drum, hold at top of drum and pull foreword and back if drum loose main bearings gon. Replace bearings.

Slim Jim

Oct 28, 2007 | Zanussi FJS1225W Front Load Washer

Not finding what you are looking for?
Zanussi ZWF1430W Front Load Washer Logo

1,083 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

shaun taylor

Level 3 Expert

1450 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...