Hi There, We have a Bosch frontloader Maxx Classic - we moved recently and had the stabiliser bars inserted so no problems would be experienced - unfortunately, when installing the washing machine into...
/* Style Definitions */
mso-padding-alt:0in 5.4pt 0in 5.4pt;
font-family:"Times New Roman";
off the wall first. Remove the front
lower panel, screws underneath. Be
prepared for water, drain out from drain hose.
Check filter for clogging, clean out.
Sometimes when the load is unbalanced & the machine cannot
the load it stops. To avoid this make
sure your wash is mixed with big and small clothes.
this does not work remove the rear panel & check belt, should have
inch ‘give’. Still not good, remove belt,
unscrew 2 bolts that hold the motor, unplug the motor connector, lever
motor back with a screwdriver. Check the
motor brushes (at terminal end of motor), if they are any shorter than 1
these sites for spares:
Check the drain where the washer drains, your plumbing, important. Pl click 'very helpful' for the free help, thnks.
Jan 04, 2009 |
Bosch Classixx WFL 2066 Front Load Washer