How can I disconnect the buzzer on my Whirlpool Imperial dryer? Thanks! Jan

How to Disable a Dryer's Buzzer

1. Turn off and unplug the dryer. Since you need to remove the front panels and expose the electrical wiring of the dryer's buzzer you should turn the dryer off and then unplug the machine to avoid shocks. ...
2. Locate the buzzer. ...
3. Pull the buzzer's wires. ...
4. Test the machine.

reference: https://www.hunker.com/13410550/how-to-disable-a-dryers-buzzer

About 21,300 results (0.60 seconds) Search Results

Dryer Buzzer Replacement - Whirlpool/Kenmore Electric ...

? 1:11
https://www.youtube.com/watch?v=vsLyHfJLfqk
Jul 15, 2010 - Uploaded by RepairClinic.com
Dryer Buzzer Replacement - Whirlpool/Kenmore Electric DryerRepair ... Additional dryer repair, troubleshooting tips, help with finding your ...

Questions and Answers for Whirlpool 694419 Adjustable ...

www.appliancepartspros.com/questions-for-whirlpool-adjustable-buzzer-...
Customer Questions and Answers for Adjustable Buzzer Kit by Whirlpool ... At theend of the dryer cycle the buzzer sounds but does not time out and shut off.

Whirlpool 694419 Adjustable Buzzer Kit ...

www.appliancepartspros.com > ... > Washer > Whirlpool Washer Parts

$27.64
Adjustable buzzer kit 694419 / AP3019850 made by Whirlpool. ... At the end of thedryer cycle the buzzer sounds but does not time out and shut off.

Whirlpool® Duet® 7.3 cu. ft. Front Load Electric Dryer with ...

www.whirlpool.com/-.../WED80HEBW/

Whirlpool Home Appliances

http://www.fixya.com/support/t25216207-disconnect_end_cycle_signal_whirlpool
go here and look at number 3 on diagram,that's the buzzer,pull the wires off and tape them so nothing touches the connectors

If the model number is correct, the dryer End of Cycle signal cannot be adjusted or turned off. The informatrion is listed on page 11 of the Owner's Manual:

http://www.managemylife.com/mmh/owner_manuals/16695/WHIRLPOOL-Laundry-Centers-L0710382?brand_name_search=LTE5243D

The only way to turn the signal off, is to remove the operator console, locate the signal (buzzer) module and disconnect the wire(s). The buzzer is listed as item 32 under the "Washer/Dryer Control Panel" parts listing:

http://www.searspartsdirect.com/partsdirect/part-model/Whirlpool-Parts/Washer-dryer-combo-Parts/Model-YLTE5243DQ2/1198/0152000/W0702346/00001?blt=06&prst=&shdMod=

CAUTION: If you choose this option, make sure you UNPLUG the washer/dryer before servicing anything inside. If you disconnect any wires, make sure you cover them with heat shrink or electrical tape to keep them from coming into contact with anything else.

The washer and dryer use a common power source, but the rest of the functions operate independently of each other. You can safely run both units at the same time.

If need further assistance, please let me know. I hope this helps you.

hello trishwadman, i'm sure there are a lot of people who would love to disable this feature. The good news is that you can. You will have to access the inside of the control panel.
http://www.youtube.com/watch?v=xGIG8Wo5-N4 This video will show you how, but you probably can do it on your on. Just pull the knobs off first.
Next you will need to locate the buzzer.
https://www.whirlpool.com/digitalassets/MLPDF/Repair%20Part%20List%20-%208180877.pdf If you look at this parts diagram for the dryer. Scroll down to page number 3 and look at PART number 3. That is your buzzer. All you have to do is disconnect one of the wires from the buzzer itself (should have 2 wires connected), and tape the end of the connection (the metal part) with electrical tape. You do not want the loose wire contacting the console or rattling inside of it while the dryer is on. That's all you have to do. No more deafening buzzing at the end of the cycle.
I hope this works, and I'm going to go do mine when I'm finished with this. My wife will be very happy if I do.
Hope this is helpful to you.

Thanks,
Mike

This problem is almost always a broken belt. Yes you can do it yourself.
Go to repairclinic. com and put in your model number for the exploded view of your dryer. Locate the belt part number and belt orientation.

It's a broken belt. Replace the tensioner assy also

48 hours minimally.

It is pilot-less ignition.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

I have a problem with my Whirlpool IMperial electric dryer, not a Duet gas dryer.