Question about Projection Televisions

1 Answer

Hello I have durabrand 2127n and it's been fine for two years, but now the sound only remains on for 10-15 seconds. the picture is v.good. I've tried playing with the remote settings and have the manual. No joy. Can you help please

Posted by on

  • 2 more comments 
  • indialiver Apr 25, 2008

    thankyou for replying Knightstar7. I'll try that

  • indialiver May 04, 2008

    thank you



    I've asked a tv guy to look at it



    It is the audio circuit



    thanks

    indialiver

  • gefton Nov 25, 2008

    hi

    i have the same problem the sound has gone completely , so what should i do , i really like this TV and couldn't afford to buy anotherone



    help me

    i would like to know which component may be faulty



    thanks

  • blessingiboc Jan 11, 2009

    I have the same problem, the sound stay on for 10 -15 seconds and goes out.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 319 Answers

You may have audio circuit problems, take to a pro/tech

Posted on Apr 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WD-52725 Picture Quality Problem


sounds like a possible issue with the Optical light engine itself.

Nov 28, 2012 | Mitsubishi WD-52725 52". Rear Projection...

1 Answer

Okay, so my Panasonic PT-43LC14 went black in mid show last night. The bulb is approximately 18 months old. The LED indicators upon Power On are; Power LED blinks green for approximately 70 seconds; Then...


Check the bulb again and look at the root of where the main stem comes out inside and be sure you don't see any bubble like appearence around the stem at the bottom there. If you do see this then the bulb is bad. Otherwise try this: Hold volume down on front of unit and pip on remote for about 5 seconds. Message will come on screen that timer has been reset to zero. This sets the lamp timer to 0

May 17, 2011 | Panasonic PT-43LC14 43" Rear Projection...

1 Answer

R56WH78 RCA TV Power/Deflection Board


Did you resolder the Flyback and replace DL231 and CL230 with the FL231?

Jan 07, 2010 | Projection Televisions

2 Answers

Picture good but no sound on my Hitachi model 50ex20b


Your audio switch on the back may have gotten moved please check the switch

Mar 10, 2009 | Hitachi 50EX20B 50" Rear Projection...

1 Answer

Lost picture


sounds like video card failure mode, 101..you a technically adroit person?

Apr 03, 2008 | Projection Televisions

1 Answer

Sound no picture


Try resoldering the vertical output IC this is acommon problem with this model

Mar 20, 2008 | Mitsubishi VS-5043 50" Rear Projection...

1 Answer

KP-46S4U lose picture after a few second blink of brightness


does the from led blink if so how mant times pause then blink again?

Feb 12, 2008 | Sony KP-48S65 48" Rear Projection...

4 Answers

TV Picture Goes Black


I had the same exact problem.
I removed the bulb and cleaned it. There is a small screen at the top of the bulb and it was covered with dust. Once it was cleaned I replaced the bulb and it solved the problem.
Thanks to those who posted the solutions

Jul 28, 2007 | Sony Grand WEGA KDF-60WF655 60" Rear...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...