Question about Canon PIXMA Photo Printer

1 Answer

Canon pixma ip1000

Ink wastepad is full

Posted by on

  • 1 more comment 
  • ramoj May 29, 2008

    a million thanx.... its working..

  • Anonymous Jul 26, 2008

    i need software ip1000 canon

  • Anonymous Dec 13, 2008

    my canon pixma ip1000 blinks green and orange continuously

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 176 Answers

I try this to my customer canon printer and it is working even i used only the step one method.

Here's the steps for reseting "Waste Ink Full" problem at iP1000

Step 1: Manual for Service mode (1st method)
1. Unplug POWER and USB cables.
2. Open door of the printer, PRESS and HOLD the POWER button.
3. Connect the POWER cable.
4. Close door, then release POWER button.
5. Power ON your printer a usual (It should not blinking anymore)

Step 1: Manual for Service mode (2nd method)
1. Unplug POWER and USB cables.
2. PRESS and HOLD the POWER button,
3. Connect the POWER cable.
3. Release the the POWER button
4. Power ON your printer a usual (It should not blinking anymore)


Step 2 : Software for Permanant (1st method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1000",
http://www.printersiam.com/data/download/iP1000%20Service%20Tool.zip
3. Select (USB PORT)
4. Choose (SET DESTINATION 1)
It should be reseted already, but somehow it start blinking again if you ever unpluging AC POWER cable. So try the 2nd method by using ServiceTool for IP1500

Step 2 : Software for Permanant (2nd method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1500",
http://www.printersiam.com/data/download/iP1500%20Service%20Tool.zip
3. Select (USB PORT)
4. Choose CLEAR WASTE INK COUNTER - MAIN
5. Choose CLEAR WASTE INK COUNTER - PLATEN
It should be working, coz my printer now now work normally

Posted on Apr 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pixma 150 waste


hi

you need to buy the waste toner container (its inexpnsive, plastci container that holds waste toner

go to this site first and follow instructions on HOW TO CLEAN THE INK ABSORBER

http://www.wikihow.com/Clean-the-Canon-Pixma-IP1000-Printer-Waste-Ink-Absorber

Feb 04, 2012 | Canon PIXMA iP1000

1 Answer

Waste ink tank on my Canon Pixma printer is full. Can this be replaced? Where do I find one? How do I replace it?


Yup! You can replace the ink cartridge of your you Canon Pixma with new one. Go to your nearest store for them to fix it

Sep 19, 2011 | Canon PIXMA iP1000

1 Answer

Wast ink absurber full..error27


Hi

The wast ink absorber full, if you want to clean the ink absorber at home without wast money, i will provide you the example in Canon printer,how clean you ink absorber follow the mention below instruction and remove the error of ink absorber.

http://www.wikihow.com/Clean-the-Canon-Pixma-IP1000-Printer-Waste-Ink-Absorber

God Luck

Sep 05, 2011 | Canon PIXMA iP1000

1 Answer

I am receiving a message that the ink absorber is getting full on my Canon Pixma MP160. Is this something I can change out or do you recommend that it be done by the pros? I was unable to find any...


your ink wastepad is almost full. You need to replace the ink wastepad inside the printer or install a wastebin then reset the printer counter protection. If you know how to change wastepad then try these the instruction on how to reset your printer.

http://pcmediks.blogspot.com/2010/11/how-to-reset-canon-mp150-mp160-mp170.html

but if you dont know how to replace the ink wastepad inside the printer better to call someone who can.

http://pcmediks.blogspot.com

Dec 18, 2010 | Office Equipment & Supplies

1 Answer

The waste ink absorber is full


To reset your Canon IP1000 just simply pull out power cord then press-hold power button, while holding power button insert back power cord. You will notice that the power button indicator lights up upon inserting power cord. then you may release power button and start printer. That will solve your "The waste ink absorber is full" message.

Downside is: you may have to do this frequently if your printer looses power. You will understand what i mean.

Jan 04, 2010 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

My printer canon pixma ip2000 wont print there is a message on the monitor saying that my ink waste absorber is full


follow the link
http://www.wikihow.com/Clean-the-Canon-Pixma-IP1000-Printer-Waste-Ink-Absorber

Jul 27, 2009 | Canon Office Equipment & Supplies

1 Answer

Waste ink absorber is full


http://www.fixyourownprinter.com/forums/inkjet/50418#1
plz check the above website for more infomation

Mar 04, 2009 | Canon PIXMA iP1600 Printer

1 Answer

Waste ink absorber is full-canon pixma ip1000


Temporary Fix
This always works in case you need your printer for Emergency ^_^.
  1. Turn off the printer
  2. And unplug the printer power cable
  3. Press and Hold the POWER button
  4. Plug the power cable again
  5. The indicator (LED) should be green
  6. Press and Release the RESUME button, the indicator (L.E.D.) should be orange
  7. Press and Release the RESUME button again, the indicator (L.E.D.) should be green
  8. Release POWER button
  9. Windows will detect new printer and you just have to install it again.
  10. It will create a copy of Canon i320 printer. Just delete the old one and rename the copy.
  11. You are done.

Feb 03, 2009 | Canon PIXMA iP4000 InkJet Photo Printer

5 Answers

Canaon pixma ip1000


i need driver for pixma ip1000

Sep 22, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

1,901 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

101609 Answers

old marine
old marine

Level 3 Expert

1710 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...