Question about RCA RT2500 System

2 Answers

No power The electrical went off for about two hours, my receiver will not re set is there a reset on the unit. I unplug the unit for two days thought it would reset it self, but no luck. I need your help please. thanks Al.

Posted by on

  • Anonymous Jun 17, 2008

    I have a RT2500 receiver but no power at all, not even in stand by.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I cant suggest a soloution but...i have a RCS- 2580 and me and my wife were rocking out while cleaning the house.. have had this unit for 9 years without any problems and the integrated amp shut down the sub an 2 surround speakers.. so i started searching for a fix because i love this amp it rocks. so i set out and found this response and guess what.. it worked THANK YOU VERY MUCH WHO EVER POSTED THIS MY UNIT IS FIXED.................................!

Posted on Jul 20, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 682 Answers

In standby mode press the following:-
stadium------night-------dsp off------club.
the system will return to its original status.

Posted on May 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My onkyo HT RC330 will not power up at all. Have had problems past couple of months with starting it but if you played around with swith it would start. Now nothing.


Try resetting the AV receiver To reset the AV receiver to its factory defaults, turn it on and, while holding down VCR/DVR, press 8 ON/STANDBY. "Clear" will appear on the display and the AV receiver will enter Standby mode.

It is possible that the protection circuitry has been activated. Remove the power cord from the wall.. Disconnect all speaker cables and input sources, and then leave the AV receiver with its power cord disconnected for 1 hour. After that, reconnect only the power cord and set the volume to maximum. If the AV receiver stays on, set then the volume to minimum, disconnect the power cord, and reconnect your speakers and input sources. If the AV receiver turns off when you set the volume to maximum, disconnect the power cord, and contact your dealer.

If the standby light is lit it and the unit will not boot it is most likely that the protection circuit has been activated. If there is no standby light then check the fuses. These units check that the power supplies are operating near specification. If a capacitor or resistor in the circuit, or a broken solder connection the unit will shut down. Because of the temperature the thermal cycling around the power supplies a broken solder joint can occur. This will make for an intermittent operation.

Hope this helps.
26289825-owoa52fq3dbvw0lom3ojbzgr-3-0.jpg Failed resistor or capacitor


26289825-owoa52fq3dbvw0lom3ojbzgr-3-2.jpg

26289825-owoa52fq3dbvw0lom3ojbzgr-3-5.jpg

Sep 23, 2016 | Onkyo Ht-rc330 5.1-channel Home Theater...

1 Answer

Blu-ray unit won't power up. Any suggestions?


it will not hert you to unplug the unit and open it up, inspect the unit for any type of burning, or the smell of burned parts, if it does have a fuse it will be located near the power supple where the cord goes into the unit. remove all screws, some screws maybe hidden behind stickers that say quality control stickers.

you mite try unplugging the unit for a few hours, try a different outlet in the power strip, resetting the power strip default button. i do not think the blu-ray has reset.

Apr 16, 2015 | Audio Players & Recorders

1 Answer

My RX-V2095 Yamaha receiver won't power up.


Wont power up, or stuck in "protect mode"? Unplug the unit & let it sit for a couple hours, then plug back in & listen for a "click" a turn (power supply relay energizing.) If no lights & no click, the first place to check is the mains fuse. If the unit is under warranty - take to an authorized facility & they will take care of it for you.

Oct 20, 2014 | Yamaha Rx-v2095 7ch Flagship Home Theater...

1 Answer

Sony dab fc7 wont power on


Two thing here.
#one the internal fuse has blown unlikely as the standby light is powered.
Two the power supply unit or switch is faulty.

get some one electrical component with the unit unpluged open the case and check any internal fuses have not blown.
Two check capacities on the power board these are large cylindrical shaped objects. These can dry out and or exploded if faulty relatively cheap to replace.
Second check the power switch actual powers the unit again someone with a multi meter and electrical compertent.
It is probably worth replacing either a capacity or switch anything else may prove false economy
I have replaced power board on other units but to be honest unless the unit was very expensive I would buy new

Dec 06, 2013 | Audio Players & Recorders

1 Answer

Hi, I have Philips HTS 3181, While running Audio CD, power suddenly went off and power came back...DVD Drive is not opening, please help


Hello,there is a chance that the brain(microprocessor) is confused and needs to be reset.Unplug the power to the unit for approximately 30 minutes and then plug it back in.Hopefully this resets the unit and it will respond to the open request.

Jan 09, 2011 | Philips HTS3500S System

1 Answer

The unit acts as though it is not receiving power. I have verified that it is receiving power, I have unplugged it as the manual directs and have waited SEVERAL minutes before replugging in and pressing...


hi,
now a days we can't sourly say that, the new electronic equipments will work for along time. you have mentioned that ur dvd player has no problem for the last 3 years. its very good.
from ur narration i think ur dvd players power supply have some problem. may it will the only problem. just try to service it. may work for the comming three years.
ok

Dec 17, 2010 | Philips HTS3544/37 Theater System

1 Answer

Speaker pop


Volume is up to high to begin with or there could be some power source close to the unit that is causing it. Turn down or turn off volume and try to do it. Thsi isn't a broken system it does happen to some units, mine included butr when I do the things I have listed it is much better. It is worse with my better sound systems.

Dec 22, 2009 | Onkyo HT-S5100 Theater System

1 Answer

Protect mode shuts down the receiver


If this happens only when connecting the receiver, chech the receiver cable. If the cable is fine, receiver connector at the back of receiver is faulty.

Protect mode will kick in whenever a fault is detected.

You get the unit not powering up, and sometimes you hear a clicking noise, that is the protection switch that keeps shutting down the unit.

Causes that can start protect mode are:

Electrostatic harges on internal circuits.
Leave the unit unplugged for power for one hour or so, this will allow discharge.

Bad speaker wiring.
Check speaker wiring, try unplugging and plugging back, or start after removing one speaker at the time.

Internal fault.
Internal fault is the natural cause for protect mode. If all the above did not work, then the problem is a blown component or an internal fault. In this case the unit must be taken apart , tested and repaired by an experienced person.
If the unit is less than one year old, or if you want to get service, call Sony at the phone number listed on the product documentation.

Regards.

Dec 23, 2008 | Samsung HTZ-510 Theater System

1 Answer

Bose 321


I have same issue. This happened on 12/31/2007 after 13 months of operation. Though remote is not controlling the unit, it controls TV. I went to BOSE showroom (Chennai, India) and remote worked perfectly with their GS display unit. Then I went to service center. Serviceman promised me to send a CD with software upgrade. Let me wait for a day or 2 receive CD and test it. Have you got any solution.

Dec 28, 2007 | Bose (321GS) System

Not finding what you are looking for?
RCA RT2500 System Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Audio Players & Recorders Experts

kakima

Level 3 Expert

98694 Answers

The Knight
The Knight

Level 3 Expert

69649 Answers

Gyula Lacz

Level 3 Expert

482 Answers

Are you a RCA Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...